AD7797BRUZ-REEL
Product Specifications
AD7797BRUZ-REEL
Analog Devices — Analog & Mixed-Signal ICs
Product Overview
The AD7797BRUZ-REEL from Analog Devices is a high-performance analog / mixed-signal IC providing precision signal acquisition, conversion, and conditioning. Analog Devices (ADI) is a world leader in high-performance analog, mixed-signal, and DSP ICs for instrumentation, healthcare, automotive, and communications.
Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.
Key Features
- High-resolution data conversion with excellent SNR and THD
- Wide dynamic range and high linearity across operating conditions
- Integrated voltage reference with low temperature drift
- Flexible digital interface — SPI, I2C, or parallel options
- Industrial/automotive temperature range with guaranteed specs
- Low power consumption with power-down modes
Key Specifications
| Resolution | bits |
| Channels | — |
| Sample Rate | kSPS |
| Interface | — |
| Supply Voltage | V |
| Operating Temp | °C |
| Package | — |
| INL | LSB |
| SNR | dB |
| THD | dB |
Applications
AD7797BRUZ-REEL: 24 Bit Bridge Converter With a Fixed Gain of 128
The AD7797BRUZ-REEL is a complete analogue front end for bridge sensors: a 24 bit sigma-delta converter with a fixed gain of 128 instrumentation amplifier in front of it, an internal clock and a temperature sensor, all in a 16-lead TSSOP. It is the part that appears inside weigh scales, strain gauge transmitters and pressure transmitters where a bridge with a 2 mV per volt sensitivity has to be read to a stable fraction of a microvolt.
What the part is
One differential input, amplified by a fixed gain of 128 and converted at 24 bits, with an output data rate programmable from 4.17 Hz to 123 Hz. Root mean square noise is 65 nV, which is the figure that decides usable resolution rather than the 24 bit word length. Simultaneous rejection of 50 Hz and 60 Hz is built in, the clock oscillator is internal, and the on-die temperature sensor can be used to compensate the bridge. Supply current is 250 uA typical and 1 uA in power-down, and the supply range is 2.7 V to 5.25 V.
Key parameters
| Parameter | Value |
|---|---|
| Resolution | 24 bit |
| Inputs | one differential, with instrumentation amplifier |
| Gain | fixed at 128 |
| Root mean square noise | 65 nV |
| Output data rate | 4.17 Hz to 123 Hz |
| Supply current | 250 uA typical, 1 uA in power-down |
| Supply range | 2.7 V to 5.25 V, separate interface supply |
| Rejection | simultaneous 50 Hz and 60 Hz |
| On-chip | temperature sensor and clock oscillator |
| Temperature range | -40 C to +85 C |
| Package | 16-lead TSSOP |
What the numbers mean on a board
With a 2.5 V reference and a gain of 128 the full scale input is 19.53 mV, and 65 nV of noise against that span is 3.3 ppm, or 18.2 bits of real resolution, so six of the twenty four bits are noise. A bridge with 2 mV per volt sensitivity on a 5 V excitation gives 10 mV of full scale, which uses only half of the converter range, and that is the number to check before choosing the excitation voltage. At 250 uA from 3 V the device consumes 750 uW, low enough to stay powered between readings in a battery instrument. Because the clock is internal and the 50 Hz and 60 Hz notches are simultaneous, a scale does not need a crystal or a mains frequency selection.
Where it is used
- Weigh scales and counting scales
- Strain gauge and pressure transmitters
- Industrial process control and instrumentation
- Portable measurement instruments
Checks that decide whether 24 bits are real
The first check is the bridge excitation. A 2 mV per volt bridge on 5 V gives 10 mV of full scale, and with a gain of 128 that is 1.28 V into a 2.5 V converter, so half the range is unused and the excitation can often be raised. The second is the reference: the converter measures against it, so its drift belongs to the reading, and a ratiometric arrangement with the bridge fed from the same source cancels most of it. The third is the filter. The 50 Hz and 60 Hz notches are simultaneous, but the settling time after a channel change still has to be respected, and a scale that reads too soon after a step shows a weight that creeps. The fourth is mechanical: creep in the load cell itself is usually larger than the converter noise.
Sourcing notes and next step
The fixed gain of 128 is the defining feature: the sibling part in the same family is 16 bit, and the wider gain range devices are different order codes, so a substitution inside a weigh scale requires a new calibration. Converter families with programmable gain are compared on the ADC and DAC cross reference page, and where the bridge sensor and its converter are being sourced together for an instrument, the options are on the medical device components page. The full catalogue is on the analog and mixed signal family page. Send the order code, the excitation voltage and the annual quantity, and we confirm stock and date code.
Request Quote — In Stock, 100% New & Original, Full Warranty