AD7682BCPZ
Product Specifications
AD7682BCPZ
Analog Devices — Analog & Mixed-Signal ICs
Product Overview
The AD7682BCPZ from Analog Devices is a high-performance analog / mixed-signal IC providing precision signal acquisition, conversion, and conditioning. Analog Devices (ADI) is a world leader in high-performance analog, mixed-signal, and DSP ICs for instrumentation, healthcare, automotive, and communications.
Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.
Key Features
- High-resolution data conversion with excellent SNR and THD
- Wide dynamic range and high linearity across operating conditions
- Integrated voltage reference with low temperature drift
- Flexible digital interface — SPI, I2C, or parallel options
- Industrial/automotive temperature range with guaranteed specs
- Low power consumption with power-down modes
Key Specifications
| Resolution | bits |
| Channels | — |
| Sample Rate | kSPS |
| Interface | — |
| Supply Voltage | V |
| Operating Temp | °C |
| Package | — |
| INL | LSB |
| SNR | dB |
| THD | dB |
Applications
Request Quote — In Stock, 100% New & Original, Full Warranty
AD7682BCPZ: The Four-Channel Member of the 250 kSPS 16-Bit Family, and Why the Reference Sets the Supply
The AD7682BCPZ is the four-channel member of a two-part family: the AD7682 has four analogue inputs, the AD7689 has eight, and both are 16-bit successive approximation converters running at up to 250 kSPS from a single supply with an internal reference. The order code here is the LFCSP body, so the thermal and footprint question is answered by the package rather than by the die, which is identical across the family. The selection question that decides most sockets is not the channel count, it is which reference the system wants to use, because that choice sets the minimum supply voltage and therefore the whole rail plan around the converter.
The internal reference decides the minimum supply, not the data sheet headline
The part can be run from an external reference or from the internal one, and the internal one has two settings: 2.5 V and 4.096 V. The 2.5 V setting needs a supply of at least 3 V, and the 4.096 V setting needs at least 4.5 V. A 3.3 V board therefore has a full scale of 2.5 V and cannot reach the 4.096 V setting at all, while a 5 V board can use either. That single sentence removes most of the confusion around this family: a 3.3 V microcontroller system buys the part for its 2.5 V full scale, and a 5 V system buys it for the 4.096 V full scale, and the same order code serves both as long as the supply is right. An external reference removes the constraint in one direction, because the supply then only has to satisfy the converter itself, at the cost of one more part and one more tolerance in the error budget.
What 16 bits at 250 kSPS actually costs on the bus
At 250 kSPS with 16 bits per result, the serial port carries 4 Mbps of payload before overhead, so the digital side has to be planned as a real bus and not as a slow housekeeping link. The converter has no pipeline delay, which means the result for a conversion is available in the same frame, and a sequencer walks the channels without host intervention, so a four-channel scan at full rate is four conversions and one interrupt. One code at a 4.096 V full scale is 62.5 uV, and one code at 2.5 V is 38.1 uV, so the resolution is only useful if the reference and the input drive are quieter than that. The data sheet quotes signal to noise and distortion of about 91 dB at a 5 V reference with a 20 kHz input, which is 14.8 effective bits, and that is the honest working number for an alternating current measurement rather than the 16-bit resolution line.
| Parameter | Value on this order code | What it decides |
|---|---|---|
| Resolution | 16 bits, no missing codes | 38.1 uV per code at 2.5 V, 62.5 uV at 4.096 V |
| Throughput | 250 kSPS | 4 Mbps of payload on the serial port |
| Channels | 4 single ended, AD7682 | The AD7689 in the same family carries 8 |
| Internal reference | 2.5 V or 4.096 V, selectable | 2.5 V needs 3 V supply, 4.096 V needs 4.5 V |
| SINAD | About 91 dB at 5 V reference, 20 kHz in | 14.8 effective bits, not 16 |
| Standby current | 50 nA at 5 V | Channel scan can be halted between bursts |
| Interface | SPI compatible, daisy chain capable | Several converters on one chip select chain |
| Package | LFCSP, 4 mm by 4 mm | Exposed pad is the thermal and ground reference |
| Supply | Single supply, 3 V minimum with 2.5 V reference | The rail plan follows the reference choice |
Input drive and the reference bypass are where the accuracy is lost
A switched capacitor input at 250 kSPS presents a load that the driving amplifier has to settle within the acquisition window, and the window shrinks as the rate goes up. A driver with a 100 ns settling time is adequate at a low rate and not adequate at 250 kSPS, and the failure appears as gain error that moves with source impedance rather than as noise. The reference input has the same problem in a different form: the internal reference is a low power circuit and it needs its bypass capacitor close to the pin, because the charge that the converter takes on each conversion comes out of that capacitor. A long trace to a distant capacitor turns the reference into a resistor in series with the signal, and the error shows up as a code dependent gain term that is easy to mistake for converter linearity.
Where this converter belongs, and what to compare against it
Four channels at 250 kSPS suits motor current sensing with three shunts and a bus voltage, a four-wire bridge with a temperature channel, power supply monitoring in a rack unit, and any application where the sample instants of all channels have to be known. Where eight channels are needed on the same board and the same firmware, the ADC and DAC cross reference lists the AD7689 as the same die in a wider channel count, and the pin to pin cross reference sets out what has to match before a substitution is signed off on an existing board. For a BOM that mixes this converter with the rest of a signal chain, the one stop BOM sourcing page covers consolidation and second source checks on the same order.