AD7606BSTZ-RL
Product Specifications
AD7606BSTZ-RL
Analog Devices — Analog & Mixed-Signal ICs
Product Overview
The AD7606BSTZ-RL from Analog Devices is a high-performance analog / mixed-signal IC providing precision signal acquisition, conversion, and conditioning. Analog Devices (ADI) is a world leader in high-performance analog, mixed-signal, and DSP ICs for instrumentation, healthcare, automotive, and communications.
Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.
Key Features
- High-resolution data conversion with excellent SNR and THD
- Wide dynamic range and high linearity across operating conditions
- Integrated voltage reference with low temperature drift
- Flexible digital interface — SPI, I2C, or parallel options
- Industrial/automotive temperature range with guaranteed specs
- Low power consumption with power-down modes
Key Specifications
| Resolution | bits |
| Channels | — |
| Sample Rate | kSPS |
| Interface | — |
| Supply Voltage | V |
| Operating Temp | °C |
| Package | — |
| INL | LSB |
| SNR | dB |
| THD | dB |
Applications
AD7606BSTZ-RL: 305 uV per Code on Eight Channels With No Driver Amplifier
The AD7606 is a complete eight channel data acquisition system: a 16-bit successive approximation converter with eight simultaneous track and hold inputs, running at up to 200 kSPS on every channel. Each input is a true bipolar channel accepting plus or minus 10 V or plus or minus 5 V from a single 5 V analog supply, with a 2.3 V to 5 V digital supply for the interface. The part carries input clamp protection, a second order antialias filter, a 1 Mohm input buffer, a 2.5 V reference and buffer, and an oversampling digital filter, all in a 64-lead LQFP.
Codes, and what the clamp buys
At the plus or minus 10 V range one code is 305.2 microvolts, and at plus or minus 5 V it is 152.6 microvolts across 65536 codes. The input clamp tolerates plus or minus 16.5 V, which leaves 6.5 V of headroom over the plus or minus 10 V range, so a transducer fault or a miswired channel does not reach the converter. The analog inputs are rated 7 kV ESD, a level that removes most external protection from the bill of materials.
The input impedance is why the driver amplifiers disappear
The buffer holds 1 Mohm at any sampling frequency. Feed it from a 1 kohm source and the gain error is 0.100 percent; from 10 kohm it is 0.990 percent; from 100 kohm it is 9.091 percent. That arithmetic is the whole argument for the part: a resistor divider with a 10 kohm Thevenin resistance is a 1 percent gain error before calibration, and a lower resistance divider or a buffer is the answer. It also explains why the single supply and the on-chip filtering remove the usual pair of plus or minus 15 V driver amplifiers and their bipolar rails.
The published table, as the vendor states it
| Parameter | Value |
|---|---|
| Resolution and channels | 16 bit, 8 simultaneous inputs |
| Throughput | 200 kSPS on all channels |
| Input ranges | plus or minus 10 V and plus or minus 5 V, true bipolar |
| Analog supply | single 5 V |
| Digital supply | 2.3 V to 5 V VDRIVE |
| Input impedance | 1 Mohm at any sample rate |
| Clamp protection | plus or minus 16.5 V |
| Antialias filter | second order, 3 dB at 22 kHz, 40 dB rejection at 200 kSPS |
| Reference | 2.5 V on chip with buffer |
| Interface | parallel or serial, SPI compatible |
| ESD on analog inputs | 7 kV |
| Temperature and package | minus 40 C to 85 C, 64-lead LQFP |
Throughput arithmetic for the interface
Eight channels of 16 bits is 128 bits per conversion. At 200 kSPS that is 25.6 Mbit per second on a serial link, or 1.6 million samples per second across the eight channels. A parallel interface is the easier choice at the top rate; the serial port is what a processor with a single SPI bus will use, and the bus has to be able to carry 25.6 Mbit per second without gaps.
Selection notes
- The 22 kHz filter is the on-chip answer to aliasing at 200 kSPS; a lower sample rate moves the corner with the oversampling setting.
- The flexible digital filter is pin driven and trades bandwidth for signal to noise ratio.
- The B version of this converter is pin compatible with the part named here, which gives a migration route without a board change.
- Six and four channel members of the family share the same core for smaller input counts.
Buyer questions
Do I still need plus or minus 15 V rails? No. The part runs from a single 5 V analog supply and handles the bipolar input range internally, so the negative rail and the input driver stage both leave the board.
Is there a wide temperature version? The standard body is rated minus 40 C to 85 C. The vendor lists an enhanced version of this converter for minus 55 C to 125 C with a controlled baseline and a single assembly site, which is the route for defense and aerospace builds.
Family page for the category: Analog and mixed-signal ICs. For converter families see ADC and DAC cross reference, and for lead time planning on data converters see component lead time solutions.
Request Quote — In Stock, 100% New & Original, Full Warranty