Contact Us

AD7400AYRWZ

Brand: Analog Devices
Analog Devices AD7400AYRWZ is a analog & mixed-signal component designed for Instrumentation and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

AD7400AYRWZ — Analog & Mixed-Signal ICs | Superb Automation

AD7400AYRWZ

Analog Devices — Analog & Mixed-Signal ICs

Product Overview

The AD7400AYRWZ from Analog Devices is a high-performance analog / mixed-signal IC providing precision signal acquisition, conversion, and conditioning. Analog Devices (ADI) is a world leader in high-performance analog, mixed-signal, and DSP ICs for instrumentation, healthcare, automotive, and communications.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-resolution data conversion with excellent SNR and THD
  • Wide dynamic range and high linearity across operating conditions
  • Integrated voltage reference with low temperature drift
  • Flexible digital interface — SPI, I2C, or parallel options
  • Industrial/automotive temperature range with guaranteed specs
  • Low power consumption with power-down modes

Key Specifications

Resolutionbits
Channels—
Sample RatekSPS
Interface—
Supply VoltageV
Operating Temp°C
Package—
INLLSB
SNRdB
THDdB

Applications

Precision Instrumentation Industrial Process Control Medical Imaging & Diagnostics Automotive Sensor Interfaces Communications Infrastructure Test & Measurement

Request Quote — In Stock, 100% New & Original, Full Warranty

AD7400AYRWZ: An Isolated Modulator That Puts 5000 V rms Between the Shunt and the Host

The AD7400 is a second order sigma delta modulator with an on chip digital isolator, an on board reference and a 10 MHz internal clock. It accepts a differential input of plus and minus 200 mV with a 320 mV full scale span, converts it into a one bit stream whose density of ones carries the input value, and passes that stream across an isolation barrier rated at 5000 V rms for one minute under UL 1577 and a working voltage of 645 V peak under VDE 0884-17. Resolution is 16 bits with no missing codes, integral nonlinearity is 2 LSB typical, offset drift is 3.5 uV per degree C maximum, supply current is 18 mA maximum at 5.25 V, and the part is a 16-lead SOIC over minus 40 to plus 105 degrees C.

4.88 uV per code, and 0.49 mA per code on a 10 milliohm shunt

A 320 mV span with 16 bits gives 4.88 uV per code, and on a 10 milliohm shunt that is 0.49 mA per code up to a 32 A full scale. The offset drift of 3.5 uV per degree C is the term that limits a dc current reading: over 145 degrees it is 507 uV, which is 104 codes, or 51 mA on the same shunt. That drift is why a motor drive uses this part for control and not for metering. For a true measurement of current over temperature the drift has to be calibrated out, or the part has to be paired with a channel that measures the shunt temperature.

10 MHz of clock and 78.1 kSPS of output

The internal clock runs at 10 MHz and the stream is one bit per clock, so the modulator produces 10 million samples per second of one bit each. Reconstructing 16 bits of resolution needs a decimation filter with a ratio around 128, which gives 78.1 kSPS, and that is the number the host sees. The filter is not in the part; it is in the digital isolator's far side, typically a sigma delta filter in the host or in a dedicated modulator interface. That means the chosen filter order and ratio set both the usable bandwidth and the group delay, and a slower filter gives a quieter reading and a later one.

ParameterValueWhat it decides
Clock10 MHz internalOne bit per clock into the filter
Input rangePlus and minus 200 mV, 320 mV full scale4.88 uV per code at 16 bits
Resolution16 bits, no missing codes0.49 mA per code on a 10 milliohm shunt
Integral nonlinearity2 LSB typical9.8 uV, smaller than the drift term
Offset drift3.5 uV per degree C maximum507 uV over 145 degrees, 104 codes
Isolation, UL5000 V rms for one minuteA withstand test, not a working voltage
Isolation, working645 V peak under VDE 0884-17The continuous voltage the barrier may see
Supply current18 mA maximum at 5.25 V94.5 mW on the isolated side
Secondary supply5 V or 3 VInterfaces to a 3.3 V host directly
ReferenceOn boardNo external reference across the barrier
OutputOne bit density streamNeeds a decimation filter in the host
Output rate78.1 kSPS at a 128 ratioThe rate and delay the control loop sees
Package and range16-lead SOICMinus 40 to plus 105 degrees C

Why a one bit stream crosses a barrier well

An isolated converter can send the conversion result as a parallel word, as a serial word, or as a continuous bit stream. The bit stream is the easiest to isolate because the barrier only has to pass a single edge per clock with no framing, no word boundary and no handshake, so a transient that delays an edge shifts one sample rather than corrupting a word. The price is that the reconstruction filter has to be on the far side, and the filter's own latency adds to the loop delay. In a motor current loop running at 10 kHz, 78.1 kSPS of input rate and a filter delay of a few samples is a small fraction of the loop period, which is why the arrangement works.

The 645 V working voltage against a 5000 V test

The two isolation numbers given here are different measurements and they are frequently confused. The 5000 V rms figure is a one minute withstand test applied in production to prove the barrier does not break down, and the 645 V peak is the continuous working voltage the insulation is rated for over the life of the product. A 690 V motor drive bus with 1000 V peaks is outside the working rating even though a short test would pass, and using it there is a reliability decision rather than an electrical one. The barrier rating has to be chosen against the working voltage and the transient category, not against the withstand test number.

The 18 mA and what it means for a gate driver board

Eighteen milliamps at 5 V is 90 mW on the isolated side, which a small linear regulator from a 15 V gate drive supply can provide without a heat sink. The isolated side also has to supply the shunt amplifier if one is used, and the total has to fit inside the budget the gate driver's isolated supply was sized for. On a three phase inverter with three modulators the total is 270 mW, which starts to matter, and that is the point at which a single modulator shared with a multiplexer stops being attractive because the multiplexer breaks the simultaneous sampling.

Buying an isolated modulator for a current loop

The order code fixes the package and the temperature grade, and the isolation certificate is part of the component's identity, so a substitute with the same function but a lower working voltage is not interchangeable. Isolated converters and the parts that accompany them can be compared through ADC DAC cross reference, the industrial drive side of the bill of materials is covered in OEM procurement, and the incoming check that catches a wrong isolation rating is described in incoming inspection plan.