AD633JRA
Product Specifications
AD633JRA
Analog Devices — Analog & Mixed-Signal ICs
Product Overview
The AD633JRA from Analog Devices is a high-performance analog / mixed-signal IC providing precision signal acquisition, conversion, and conditioning. Analog Devices (ADI) is a world leader in high-performance analog, mixed-signal, and DSP ICs for instrumentation, healthcare, automotive, and communications.
Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.
Key Features
- High-resolution data conversion with excellent SNR and THD
- Wide dynamic range and high linearity across operating conditions
- Integrated voltage reference with low temperature drift
- Flexible digital interface — SPI, I2C, or parallel options
- Industrial/automotive temperature range with guaranteed specs
- Low power consumption with power-down modes
Key Specifications
| Resolution | bits |
| Channels | — |
| Sample Rate | kSPS |
| Interface | — |
| Supply Voltage | V |
| Operating Temp | °C |
| Package | — |
| INL | LSB |
| SNR | dB |
| THD | dB |
Applications
Request Quote — In Stock, 100% New & Original, Full Warranty
AD633JRA: Two Percent of Full Scale Is 82 Steps at 12 Bits
The AD633 is a complete four quadrant analogue multiplier with differential high impedance X and Y inputs, a unity gain summing input, a laser trimmed 10 V scaling reference and an output buffer, in an 8-lead package with no external components needed. Its guaranteed total error is 2 percent of full scale, which on a 20 V peak to peak span is 200 mV. At 12 bits on a 10 V range the step is 2.44 mV, so the multiplier's own error is 82 steps: this is a signal processing part, not a measurement part, and a circuit that uses it to compute a precise product will be disappointed by the parts that pass the specification.
Where the error actually sits
The 2 percent is total error at 25 C, and the two input nonlinearities are different: the X nonlinearity is quoted at 0.25 percent of full scale and the Y nonlinearity at 0.01 percent typical with a 0.41 percent maximum. That asymmetry is worth knowing because a circuit that divides uses the Y input as the divisor, and the divisor path is the more linear of the two. Slew rate is 20 V per microsecond, small signal bandwidth is 1 MHz and the output noise is about 100 uV rms over 10 Hz to 10 kHz, so the noise is far below the accuracy error and the part is limited by calibration rather than by noise.
| Function | Connection | Resulting scale factor |
|---|---|---|
| Multiply | X and Y driven, Z grounded | W equals X times Y divided by 10 V |
| Divide | Multiplier in the feedback path of an op amp | W equals 10 V times Z divided by X |
| Square | Same signal on X and Y | W equals X squared divided by 10 V |
| Square root | Squarer in the feedback path | W equals the root of 10 V times Z |
| Modulate | Carrier on X, modulation on Y | Amplitude modulation with suppressed carrier |
| Sum two products | Two devices, outputs joined at Z | Weighted sum, gain set by the Z network |
The 10 V scale factor is a real constraint
Because the output is X times Y divided by 10 V, a multiplier used with 1 V signals produces 100 mV, and the fixed 2 percent full scale error is then 20 mV against that 100 mV, which is 20 percent of the result. Gain can be restored at the Z input or in a following stage, but the error is multiplied with it. Circuits that work at low signal levels either scale up before the multiplier or accept that the error budget is dominated by the multiplier and trim it. The Z input also allows the output to be converted to a current or summed with other terms, which is how a two chip analogue computer is built.
Grade, package and temperature
The J grade in this order code is specified from 0 C to 70 C, while the A grade covers minus 40 C to plus 85 C. The package is an 8-lead PDIP or SOIC. A board that specifies this part for an outdoor enclosure is outside its temperature range even though every other parameter meets the requirement, and the fix is the A grade rather than a heatsink. The supply range is 8 V to 18 V, and at the low end the input and output swings shrink, so the 10 V full scale assumes a supply with enough headroom above and below it.
Sourcing an analogue multiplier
Multipliers from different vendors share a pinout more often than they share a scale factor, so a substitution has to confirm the divisor and the full scale as well as the footprint. The amplifier cross reference page covers the signal chain around it, the pin to pin cross reference page covers the footprint, and incoming checks follow the incoming inspection plan.