AD5348BRUZ
Product Specifications
AD5348BRUZ
Analog Devices — Analog & Mixed-Signal ICs
Product Overview
The AD5348BRUZ from Analog Devices is a high-performance analog / mixed-signal IC providing precision signal acquisition, conversion, and conditioning. Analog Devices (ADI) is a world leader in high-performance analog, mixed-signal, and DSP ICs for instrumentation, healthcare, automotive, and communications.
Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.
Key Features
- High-resolution data conversion with excellent SNR and THD
- Wide dynamic range and high linearity across operating conditions
- Integrated voltage reference with low temperature drift
- Flexible digital interface — SPI, I2C, or parallel options
- Industrial/automotive temperature range with guaranteed specs
- Low power consumption with power-down modes
Key Specifications
| Resolution | bits |
| Channels | — |
| Sample Rate | kSPS |
| Interface | — |
| Supply Voltage | V |
| Operating Temp | °C |
| Package | — |
| INL | LSB |
| SNR | dB |
| THD | dB |
Applications
AD5348BRUZ: Octal 12-Bit Parallel DAC at 1.4 mA and 20 ns Write
The AD5348BRUZ is the 38-lead TSSOP body of the AD5348, an eight channel, 12-bit, voltage output converter with a parallel interface, in production. It runs from 2.5 V to 5.5 V, draws 1.4 mA maximum at 3.6 V, offers a rail-to-rail output range of zero to the reference or zero to twice the reference, and takes a 20 ns write pulse. The family covers eight, ten and twelve bit members that are pin compatible, so a board can change resolution without changing the copper, which is a rare thing in a converter line and the reason this part appears in a lot of legacy instrumentation. Where a board is being compared against serial converters, the ADC and DAC cross reference is the right starting page.
What the numbers actually mean
Twelve bits over a 2.5 V reference is a 610 uV step, and over the doubled range of 5 V full scale it is 1.22 mV. The 1.4 mA maximum at 3.6 V is 5 mW for eight channels, which is 0.63 mW per channel, and that is what makes an octal part viable in a portable instrument. The 20 ns write time is the bus, not the output: the amplifier that buffers each channel settles in microseconds, so the useful update rate is set by the analog side.
| Parameter | Figure | What it decides in a build |
|---|---|---|
| Channels and resolution | Eight, 12 bit, voltage output | 610 uV per step on 2.5 V, 1.22 mV on the 5 V range |
| Supply current | 1.4 mA maximum at 3.6 V | 5 mW for eight channels, 0.63 mW each |
| Power down | 120 nA at 3 V, 400 nA at 5 V | Standby current below the leakage of most boards |
| Output range | Zero to reference, or zero to twice the reference | One part covers a 2.5 V and a 5 V full scale by pin strap |
| Interface | Parallel, 20 ns write, readback | Eight channels updated from one bus cycle each |
| Update | LDAC for simultaneous, CLR asynchronous | Eight setpoints move together, or all clear at once |
| Temperature and package | Minus 40 to plus 105 degrees C, 38-lead TSSOP | An industrial range in a package that fits a dense board |
Where it can surprise a build
The doubled output range needs headroom. With the gain pin strapped for zero to twice the reference, the output amplifier has to reach 5 V from a 2.5 V reference, and the supply has to be above that with the amplifier's own dropout included. A 3.3 V board cannot use the doubled range, and a 5 V board at the bottom of its tolerance is at the edge.
Power on reset drives all eight outputs to zero and holds them there until a valid write. On a bias supply that is the safe state; on a system that expects midscale, it is a fault until the processor writes. The asynchronous CLR behaves the same way and can be asserted by a watchdog, which is either the feature you want or the one that takes a rack down.
Readback is a real feature and it is not a measurement of the output voltage. It returns the register contents, so it catches a bus error and does not catch a load fault or an output that has been pulled by an external circuit. A system that verifies its own outputs needs an analog measurement in addition to the readback.
Applications and how it fits a control rack
Portable battery instruments, digital gain and offset adjustment, programmable voltage and current sources, optical networking, automatic test equipment, mobile communications, programmable attenuators and industrial process control. Eight channels in one body with simultaneous update is the shape of a bias card or an attenuator bank, where all the setpoints have to change at one instant. When an obsolete octal converter has to be replaced, BOM shortage recovery covers how to compare the family rather than the single order code.
The pin compatible eight and ten bit members and the rest of the converter range are on the analog and mixed-signal IC page.
Questions buyers ask about this order code
Is the BRUZ body the 38-lead TSSOP? Yes, and the family also lists a 6 mm by 6 mm, 40-lead LFCSP. The two are electrically the same converter with different thermal and board area answers, so a substitution between them is a copper change.
Do I need a separate reference per channel? No. The reference inputs are buffered or unbuffered by choice and shared across the eight channels, and the gain pin sets whether the output spans one or two times that reference. A per channel reference would defeat the point of an octal body.
How fast can all eight channels be updated? The bus can write eight registers in a fraction of a microsecond and the LDAC pulse updates them together, but each output amplifier then has to settle into its load. The analog settling, not the 20 ns write, is the rate a control loop sees.
Request Quote — In Stock, 100% New & Original, Full Warranty