AD5320BRTZ
Product Specifications
AD5320BRTZ
Analog Devices — Analog & Mixed-Signal ICs
Product Overview
The AD5320BRTZ from Analog Devices is a high-performance analog / mixed-signal IC providing precision signal acquisition, conversion, and conditioning. Analog Devices (ADI) is a world leader in high-performance analog, mixed-signal, and DSP ICs for instrumentation, healthcare, automotive, and communications.
Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.
Key Features
- High-resolution data conversion with excellent SNR and THD
- Wide dynamic range and high linearity across operating conditions
- Integrated voltage reference with low temperature drift
- Flexible digital interface — SPI, I2C, or parallel options
- Industrial/automotive temperature range with guaranteed specs
- Low power consumption with power-down modes
Key Specifications
| Resolution | bits |
| Channels | — |
| Sample Rate | kSPS |
| Interface | — |
| Supply Voltage | V |
| Operating Temp | °C |
| Package | — |
| INL | LSB |
| SNR | dB |
| THD | dB |
Applications
Request Quote — In Stock, 100% New & Original, Full Warranty
AD5320BRTZ: 12 Bits From 115 uA in a Six Pin Package
The AD5320BRTZ is a single channel 12 bit voltage output converter in a 6-lead SOT-23, and the supply current is 115 uA at 3 V, which is the lowest in the family that includes the 8 bit and 10 bit members. The output amplifier swings rail to rail, the reference is taken from the supply so there is no reference pin, and the part comes up with the output at zero volts after power on reset. Three power down modes drop the current to 50 nA at 3 V, and the serial interface has Schmitt trigger inputs so a slow logic edge does not cause a double clock. The 8-lead MSOP body carries the same die for boards that prefer a larger footprint.
Published values
| Parameter | Value |
|---|---|
| Resolution | 12 bits, single channel |
| Supply | 2.7 V to 5.5 V |
| Supply current | 115 uA at 3 V, 140 uA at 5 V |
| Power down current | 200 nA at 5 V, 50 nA at 3 V |
| Reference | Derived from the supply |
| Output | Rail to rail buffered |
| Power on reset | Output to zero volts |
| Family | Pin compatible with the 8 bit and 10 bit members |
| Interface | Serial, Schmitt trigger inputs, SYNC interrupt |
| Bodies | 6-lead SOT-23 and 8-lead MSOP |
Twelve bits on a supply referenced converter
The step size on a 3 V rail is 733 uV, and because the reference is the supply, a one percent change in the rail moves every code by one percent of full scale. That is 41 counts, which is larger than the quantisation step itself, so a board using this part needs a rail that is either accurate or measured. Where the rail is measured, the converter becomes a ratiometric element and the absolute accuracy of the rail cancels, which is the normal arrangement in a battery instrument that reports a fraction of its own supply. Where the output has to be an absolute voltage, an external reference is the answer and the part is the wrong choice.
Six pins and what is left out
A 6-lead package leaves room for the supply, ground, the output, the serial clock, the data input and the synchronisation input, and nothing else. There is no reference pin, no separate output supply and no readback, so the host cannot confirm the programmed code except by measuring the output. That is acceptable in a set point that is checked by the system it controls and unacceptable where the converter is part of a calibration path. The 8-lead MSOP body adds nothing electrically; it exists because some assembly lines cannot place a 6-lead part reliably.
Three power down modes and the settling on wake
The three power down functions differ in what they leave connected: one leaves the output amplifier on with the resistor network disconnected, one disconnects both, and one adds a high impedance state at the output. Each has a different wake up time, and that time is what decides whether the mode can be used between measurements. In a loop that samples every second, a wake up of tens of microseconds is invisible; in a loop that samples every millisecond, the same wake up dominates the budget and the part is better left running at 115 uA.
Pin compatibility across the family
The 8, 10 and 12 bit members share a pinout and a package, so a product line that spans several accuracy classes can use one board and fit the converter that matches the price point. That is a real advantage in industrial instruments where the same chassis is sold in three accuracy grades. The caution is that the supply current and the settling time also change across the family, so a power budget written for the 8 bit part does not automatically hold for the 12 bit one. The converter cross reference page lists the family by resolution and body, the pin to pin cross reference page shows which members swap directly, and the lead time page covers availability across the range.