AD2S1210CSTZ
Product Specifications
AD2S1210CSTZ
Analog Devices — Analog & Mixed-Signal ICs
Product Overview
The AD2S1210CSTZ from Analog Devices is a high-performance analog / mixed-signal IC providing precision signal acquisition, conversion, and conditioning. Analog Devices (ADI) is a world leader in high-performance analog, mixed-signal, and DSP ICs for instrumentation, healthcare, automotive, and communications.
Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.
Key Features
- High-resolution data conversion with excellent SNR and THD
- Wide dynamic range and high linearity across operating conditions
- Integrated voltage reference with low temperature drift
- Flexible digital interface — SPI, I2C, or parallel options
- Industrial/automotive temperature range with guaranteed specs
- Low power consumption with power-down modes
Key Specifications
| Resolution | bits |
| Channels | — |
| Sample Rate | kSPS |
| Interface | — |
| Supply Voltage | V |
| Operating Temp | °C |
| Package | — |
| INL | LSB |
| SNR | dB |
| THD | dB |
Applications
Request Quote — In Stock, 100% New & Original, Full Warranty
AD2S1210CSTZ: the C grade resolver converter and what the wider tolerance buys
The AD2S1210CSTZ is the C grade of the AD2S1210 resolver to digital converter in a 48-lead LQFP. It carries the same function as the B grade, the same 10, 12, 14 or 16 bit selectable output and the same 3125 revolution per second maximum tracking rate at 10 bit, but the published angular accuracy is the looser figure the document lists for the A and C grades. The C grade keeps the full minus 40 to plus 125 degree C range, so it is the wider temperature option rather than the tighter angle option.
Published values
| Parameter | Value |
|---|---|
| Function | monolithic resolver to digital converter |
| Resolution | 10, 12, 14 or 16 bit, set by register |
| Angular accuracy, C grade | looser published figure than the B and D grades |
| Maximum tracking rate | 3125 rps at 10 bit with a 10.24 MHz clock |
| Outputs | absolute position and velocity, parallel and serial ports |
| Supply | 5 V, with a 2.3 V to 5.25 V logic interface |
| Package | 48-lead LQFP (ST-48) |
| Temperature range, C grade | -40 C to +125 C |
| On board oscillator | programmable sinusoidal excitation |
| Fault detection | programmable thresholds, system fault outputs |
| Other | incremental encoder emulation, differential inputs, AEC-Q100 family |
The angle specification is the only thing the grade changes
A resolver loop that averages many samples per mechanical revolution does not care about a few arc minutes of absolute error, because the error is not correlated with the motion. That is the case for fan, pump and traction commutation, and it is the case where the C grade is the correct purchase. A machine tool axis or a radar positioner does care, because the absolute angle is the measurement, and that is where the B grade belongs.
The second difference is historical: the A grade in this family publishes a narrower temperature range of minus 40 to plus 85 degrees C, while the C grade reaches plus 125. So the C grade is not simply a cheaper B grade; it is the grade that trades angle for temperature and price.
Quantisation at each resolution
At 10 bit the least significant bit of a full revolution is 21.09 arc minutes, at 12 bit 5.27, at 14 bit 1.318 and at 16 bit 0.33. A grade whose accuracy is around 5 arc minutes is quantisation limited at 12 bit: the converter cannot resolve better than the code it outputs. Asking for 16 bit from this grade gives a finer code with the same absolute error, which is a useful thing for velocity estimation and a misleading thing for position accuracy.
Velocity is where the extra resolution earns its place even on the looser grade: the tracking loop derives velocity from the same signals, and a finer position code gives a smoother velocity estimate at low speed, which is what a servo needs to avoid cogging at standstill.
Fault detection is part of the safety case
The family publishes system fault detection with programmable thresholds plus loss of signal and loss of tracking outputs. For a drive that has to be certified, those outputs are the mechanism that tells the controller the angle is no longer trustworthy, and they are the same on every grade. Buying the C grade does not buy a weaker safety function.
The fault thresholds are programmable, which means they have to be set for the resolver being used: an excitation of 3.15 volts peak to peak with a plus or minus 27 percent tolerance is the published input range for the related 12 bit part, and a resolver that sits outside that window will trip the monitor before the angle degrades.
Two pages worth reading before a purchase order goes out are the ADI second source page and medical device components; the first lists what else fits the socket, the second is the test sequence for a drop in, and component lead time solutions covers the case where the shortage is already on the line.
Two questions buyers ask
Is the C grade a drop in replacement for the B grade? The package, pinout and function are the same and the angular accuracy is looser. A product specified against the B grade accuracy has to be re-qualified before the C grade is used.
Does the C grade reach 125 degrees C? Yes. The C grade is published over minus 40 to plus 125 degrees C. The A grade is the one that stops at plus 85 degrees C.