Contact Us

AD1580BRTZ-REEL7

Brand: Analog Devices
Analog Devices AD1580BRTZ-REEL7 is a analog & mixed-signal component designed for Precision Instrumentation and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

AD1580BRTZ-REEL7 — Analog & Mixed-Signal ICs | Superb Automation

AD1580BRTZ-REEL7

Analog Devices — Analog & Mixed-Signal ICs

Product Overview

The AD1580BRTZ-REEL7 from Analog Devices is a high-performance analog / mixed-signal IC providing precision signal acquisition, conversion, and conditioning. Analog Devices (ADI) is a world leader in high-performance analog, mixed-signal, and DSP ICs for instrumentation, healthcare, automotive, and communications.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-resolution data conversion with excellent SNR and THD
  • Wide dynamic range and high linearity across operating conditions
  • Integrated voltage reference with low temperature drift
  • Flexible digital interface — SPI, I2C, or parallel options
  • Industrial/automotive temperature range with guaranteed specs
  • Low power consumption with power-down modes

Key Specifications

Resolutionbits
Channels—
Sample RatekSPS
Interface—
Supply VoltageV
Operating Temp°C
Package—
INLLSB
SNRdB
THDdB

Applications

Precision Instrumentation Industrial Process Control Medical Imaging & Diagnostics Automotive Sensor Interfaces Communications Infrastructure Test & Measurement

AD1580BRTZ-REEL7: a 1.225 V Shunt Reference that Works Down to 50 microamps

What this part is

The AD1580 is a two terminal shunt voltage reference with a 1.225 V output, built on a band gap core with curvature correction, in a three lead SOT-23 or SC70. A shunt reference behaves like a zener with a very flat knee: it is biased from a resistor and it sinks whatever current the load does not take, which means the part has no quiescent current of its own and can be used in circuits where a series reference would have to idle at milliamps.

The operating current range is 50 microamps to 10 milliamps, initial accuracy is plus or minus 0.1 percent on the B grade, drift is plus or minus 50 ppm per degree C maximum, output impedance is 0.5 ohm maximum, and wideband noise from 10 Hz to 10 kHz is 20 microvolts RMS. The part is stable with any value of capacitive load, which removes one of the usual headaches of shunt references, and it is specified from minus 40 to plus 85 degrees C. Applications listed are portable battery equipment, handsets, notebooks, personal digital assistants, GPS receivers, digital multimeters, smart transmitters, memory cards and 8 to 12 bit converters.

Published figures that matter to a buyer

Output voltage1.225 V
Operating current50 microamps to 10 milliamps
Initial accuracyplus or minus 0.1 percent, B grade
Temperature driftplus or minus 50 ppm per degree C maximum
Output impedance0.5 ohm maximum
Noise20 microvolts RMS, 10 Hz to 10 kHz
Temperature rangeminus 40 to plus 85 degrees C
ESD4 kilovolts human body model, 400 volts machine model
Load stabilitystable with any capacitive load
Bodies3 lead SOT-23 and 3 lead SC70
GradesA and B

Where the headline numbers stop

Initial accuracy of plus or minus 0.1 percent is plus or minus 1.23 millivolts, which is the number a trim at room temperature can reach. Drift of plus or minus 50 ppm per degree C over the 125 degree industrial span is 6250 ppm, which is 7.66 millivolts: six times the initial error, and in the opposite direction from what a bench calibration at 25 degrees C would suggest. A 12 bit converter on this reference has a count of 299 microvolts, so the initial error is 4 counts and the drift is 26 counts. The part is a 12 bit reference at room and a 10 bit reference over temperature unless it is calibrated in the enclosure.

The 50 microamp minimum current is a floor that has to be respected at the worst case load, not at the typical one. The bias resistor has to supply the maximum load current plus 50 microamps at the minimum supply voltage; at 5 V with a 1 milliamp bias the resistor is 3.775 kiloohms, and at 3.3 V with 0.5 milliamp it is 4.15 kiloohms. A circuit that sizes the resistor at the typical load puts the reference out of regulation at the top of the load range, and the failure looks like noise rather than like a bias problem.

Output impedance of 0.5 ohm is load regulation: half a milliamp of load change moves the output 0.25 millivolts, which is 204 ppm, more than the initial accuracy of the B grade. Noise of 20 microvolts RMS is 16.3 ppm and 0.067 of a 12 bit count, so noise is not the limit at 12 bits and becomes one at 16 bits. Those three terms together describe what the part can and cannot do, and the 0.1 percent headline describes only the first.

Applications where it fits

  • 3 V and 5 V battery instruments where a series reference would waste supply current.
  • 8 to 12 bit converter references in handheld meters and data loggers.
  • Smart industrial transmitters where the loop current is fixed and every microamp counts.
  • Comparator thresholds and window detectors that need a stable low voltage.
  • Circuits that need a negative or floating reference, where a two terminal part is the simple answer.

Two questions buyers ask

Can the reference be used at a current above 10 milliamps? No. Ten milliamps is the top of the operating range, and beyond it the part is outside its specification for both accuracy and long term stability. A load that needs more current should take it from a buffer, with the reference driving the buffer input.

What happens if the load current falls to zero? The shunt sinks the whole bias current, which is why the bias resistor has to be sized for the maximum supply voltage as well: at no load the entire (V supply minus 1.225 V) appears across the resistor and the part dissipates the whole product. At 12 V and 1 milliamp that is 10.8 milliwatts in a SOT-23, which is within the package but should be checked.

Sourcing notes and next step

AD1580BRTZ-REEL7 is the B grade in the three lead SOT-23 in tape and reel. The A and B grades differ in initial accuracy and both are specified over the same temperature range, so the grade letter is the accuracy decision and the body code is the footprint decision. The shunt topology also means this line is often a drop in for a zener in an existing circuit, which is where the bias resistor arithmetic above matters most. The analog and mixed signal IC family page lists the reference line, the converter cross reference page covers the converter side of a reference change, and the cost reduction page sets out what can be re-costed around a reference.

Request Quote — In Stock, 100% New & Original, Full Warranty