HX52400S3
Product Specifications
HX52400S3
Hisiwell — Amplifiers & Comparators
Product Overview
The HX52400S3 from Hisiwell is a precision amplifier / comparator delivering high gain, wide bandwidth, and low distortion for signal conditioning. Hisiwell is a recognized semiconductor supplier providing reliable components for global electronics manufacturing.
Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.
Key Features
- High gain-bandwidth product for wideband signal amplification
- Low input offset voltage and drift for precision DC applications
- EMI-hardened design for robust operation in noisy environments
- Rail-to-rail input/output for maximum dynamic range
- Low quiescent current for power-sensitive designs
- Unity-gain stable with capacitive load drive capability
Key Specifications
| Channels | — |
| GBWP | MHz |
| Slew Rate | V/µs |
| Vos | µV |
| Iq per Channel | µA |
| Input Type | — |
| Supply Voltage | V |
| Operating Temp | °C |
| Package | — |
Applications
HX52400S3: a 25 dB output return loss that pays for itself in front of a mixer
The HX52400S3 covers DC to 6 GHz with 16 dB of gain, 14 dBm at compression and a 2.9 dB noise figure, drawing 40 mA from 5 V in a SOT89. Its distinguishing figure is the output match: 25 dB of return loss, which is 1.12:1 with 0.01 dB of mismatch loss. That is the best output match in the family and it changes what a board has to add around the part.
What the vendor publishes
| Parameter | Value |
|---|---|
| Frequency range | DC to 6 GHz |
| Gain | 16 dB |
| Output P-1dB | 14 dBm at 1 GHz |
| Output Psat | 15 dBm |
| Noise figure | 2.9 dB |
| Input return loss | 22 dB, 1.17:1 |
| Output return loss | 25 dB, 1.12:1 |
| Output IP3 | 28 dBm at 1 GHz |
| Supply | +5 V, 40 mA |
| Package | SOT89 |
What 25 dB of return loss removes from the board
A common remedy for a badly matched amplifier output is a 3 dB pad before the mixer. It flattens the load and protects the mixer, and in a receive path it also adds 3 dB directly to the noise figure, which on a 2.9 dB part destroys the reason for buying it. An output match of 1.12:1 makes that pad unnecessary in most chains: the reflection coefficient is under 0.07, so the mixer sees close to 50 ohms across the band. This is the single strongest argument for choosing this part over the other DC to 6 GHz member of the family.
Where the DC to 6 GHz range comes from
The part is DC coupled and specified from DC up, which makes it usable as an IF or baseband amplifier as well as an RF stage. At 5 V and 40 mA the DC input is 0.20 W, and at compression the output is 0.025 W, 12.6 percent conversion, leaving 0.175 W of heat. In a SOT89 with a decent copper pad that is a mild thermal load, and the part does not need the thermal vias that a DFN paddle would.
Two tone behaviour at the level it will run
The output intercept of 28 dBm is 14 dB above the compression point, the second widest margin in the family. Two tones at 8 dBm each at the output put third order products about 40 dBc down; at 4 dBm per tone they fall to 48 dBc. For a downlink stage driving a mixer, this is enough headroom to keep the amplifier out of the intermodulation budget that the mixer itself will dominate.
Two questions buyers ask
Does it need an input blocking capacitor? Yes, if the source has any DC path to ground or an offset. The part is specified from DC, which means the input is directly coupled to the first transistor base or gate; a DC block is normal practice on both ports unless the surrounding circuit is biased for it.
Is 40 mA realistic in a battery powered product? 0.20 W for 16 dB of gain and 14 dBm of compression is a fair trade, but it is not a low power part. If the rail budget is tighter, the 33 mA member of the same family gives 22 dB instead, at 2 dB less compression.
SUPERB supplies the HX52400S3 with the vendor table confirmed per shipment. If you are comparing it against a part already on the board, the amplifier cross reference hub lists the checks that matter before a substitution. For a mixed bill of materials around this stage, see RF component sourcing. Price breaks for the HX52400S3 come from the amplifiers and comparators index.
Request Quote — In Stock, 100% New & Original, Full Warranty