HX231170AP5
Product Specifications
HX231170AP5
Hisiwell — Amplifiers & Comparators
Product Overview
The HX231170AP5 from Hisiwell is a precision amplifier / comparator delivering high gain, wide bandwidth, and low distortion for signal conditioning. Hisiwell is a recognized semiconductor supplier providing reliable components for global electronics manufacturing.
Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.
Key Features
- High gain-bandwidth product for wideband signal amplification
- Low input offset voltage and drift for precision DC applications
- EMI-hardened design for robust operation in noisy environments
- Rail-to-rail input/output for maximum dynamic range
- Low quiescent current for power-sensitive designs
- Unity-gain stable with capacitive load drive capability
Key Specifications
| Channels | — |
| GBWP | MHz |
| Slew Rate | V/µs |
| Vos | µV |
| Iq per Channel | µA |
| Input Type | — |
| Supply Voltage | V |
| Operating Temp | °C |
| Package | — |
Applications
HX231170AP5: 40 percent at 2 W, and a linearity figure that is actually printed
The HX231170AP5 covers 13.75 to 14.75 GHz with 29 dB of small signal gain, 33 dBm at the 1 dB compression point and 40 percent power added efficiency from a 7 V rail with a negative gate, in a QFN 5 x 5. It is one of only five rows in the Hisiwell GaAs power table that publish an IMD3 figure, and the number is minus 24 dBc at 25 dBm per tone.
What the vendor publishes
| Parameter | Value |
|---|---|
| Frequency range | 13.75 to 14.75 GHz |
| Small signal gain | 29 dB |
| Output P-1dB | 33 dBm |
| PAE | 40 percent |
| IMD3 | minus 24 dBc at 25 dBm per tone |
| Supply | 7 V with negative gate |
| Package | QFN 5 x 5 mm |
The linearity figure located properly
Two tones at 25 dBm each is 28.0 dBm of total output. The compression point is 33 dBm, so the test sits 5.0 dB below compression, which is a realistic operating point for a satcom uplink rather than a back off so deep that the number is meaningless. The third order intercept that follows from minus 24 dBc at 28 dBm total is 40.0 dBm, seven dB above the compression point. For comparison, the 13.75 to 14.75 GHz QFN 6 x 6 sibling publishes minus 25 dBc at 30 dBm per tone, which is 33.0 dBm total and a 45.5 dBm intercept, 7.5 dB above its own 38 dBm compression point. The two rows are consistent with each other, which is a good sign for both.
What that means in practice: at 28 dBm total output the part produces third order products 24 dB down. If the system needs 30 dBc, the operating point has to drop by 3 dB, to about 25 dBm total, where each tone is 22 dBm. That is the arithmetic a link budget needs, and it is available here without a measurement campaign.
2 W out, 5 W in, 3 W of heat in 25 square millimetres
33 dBm is 2.0 W. At 40 percent the DC input is 4.99 W, which at 7 V is 713 mA, and 3.0 W leaves as heat. Across a 5 x 5 mm package that is 0.120 W per square millimetre, the lowest heat density in this family, because 40 percent is the best efficiency in the table. That is the reason to pay for this part: the same 2 W from a 20 percent device would be 8 W of heat in the same footprint.
Drive at compression is 4 dBm, 2.5 mW. With 29 dB of gain the input is almost a logic level, which means the stage before it can be a small packaged amplifier and the interstage loss budget is generous. It also means the input match matters: 29 dB of gain magnifies a return loss by the same amount, so the source has to see a stable impedance across 13.75 to 14.75 GHz.
A 1 GHz band on the Ku uplink segment
13.75 to 14.75 GHz is 7.0 percent fractional and covers the standard uplink segment plus the extension. That is narrow enough for a real filter in the output match and wide enough that a single tuned section will not hold it, so two sections are normal. The package is 5 x 5, which at 14 GHz is about a quarter wavelength on a side, so the package itself is part of the circuit and the ground vias have to be placed with that in mind.
Two questions buyers ask
Can it be used for the downlink band? No. 10.7 to 12.75 GHz is outside the row, and the match is cut for the uplink segment. The 8 to 12 GHz parts on this table cover the downlink.
What is the gate sequence? The row prints a negative gate. Bring the gate up first, then the 7 V drain, and reverse the order on power down. A depletion mode die with the drain on and the gate floating draws its full current.
SUPERB quotes the HX231170AP5 against the vendor row above, including the IMD3 figure that most rows in this table leave blank. Where it replaces a Ku band driver that is no longer available, amplifier cross reference lists the parameters that have to agree. For the gate bias and filter parts around it, see RF component sourcing. Stock and price breaks come from the amplifiers and comparators index.
HX231170AP5: what a 713 mA drain and a negative gate ask of the bias network
Seven hundred and thirteen milliamps is the number this part puts on the supply: 2.0 W of RF out at 40 percent efficiency is 4.99 W of dc, which at 7 V is 713 mA, and 3.0 W of that leaves as heat. The negative gate is the second half of the story, because a depletion mode device with the drain on and the gate floating will draw its full current and destroy itself in the time it takes the bias to come up. Both of those are assembly and bias questions rather than part questions, and they are decided on the board rather than in the datasheet row.
| Item | Value for this part | What it decides on the board |
|---|---|---|
| Drain current | 713 mA at 7 V, from 2.0 W out at 40 percent | The choke and the bulk capacitance are sized by this, not by the RF output |
| Heat | 3.0 W in a 5 by 5 mm body | The exposed pad and the via array are the only path, and they are part of the circuit at 14 GHz |
| Gate | Negative, value per datasheet | Gate first, then drain; reverse on power down, or the device conducts with no control |
| Pulse charge | 100 us at 713 mA is 71.3 uC | A 100 uF bulk capacitor droops 0.713 V, which is 10 percent of the rail |
| Gain | 29 dB | The input at compression is 4 dBm, so the driver is a small packaged amplifier |
| Linearity | Minus 24 dBc at 25 dBm per tone | For 30 dBc the operating point drops about 3 dB, to 22 dBm per tone |
Bulk capacitance is arithmetic, not a habit
A pulsed drain at 713 mA for 100 us removes 71.3 uC from the bulk capacitor, and the droop that follows is that charge divided by the capacitance. A 100 uF part droops 0.713 V, a 220 uF part droops 0.32 V and a 470 uF part droops 0.15 V. In a pulsed radar or a satcom burst the allowed droop is set by how much gain and compression the system can lose at the end of the pulse, and 10 percent of the rail is normally too much, which is why a bias board for a part in this class carries several hundred microfarads rather than the single 10 uF that a continuous wave stage would use.
The pad is a quarter wave at the band
Five millimetres at 14 GHz is close to a quarter of the free space wavelength of 21.4 mm, so the package is not a container the circuit sits in, it is a section of the circuit. The ground vias around the die paddle have to be close enough together that the paddle behaves as a ground plane at the band, and the same vias are the thermal path for 3.0 W. One array does both jobs, which is why the vendor evaluation board is worth copying rather than approximating.
Where the linearity figure pays for the part
At 25 dBm per tone the two tone total is 28 dBm and the products are 24 dB down, so a system that needs 30 dBc runs about 3 dB lower, at 22 dBm per tone. That is the point of buying 40 percent efficiency rather than 20 percent: the same 2 W at the lower efficiency would put 8 W of heat in the same footprint, which no 5 by 5 mm package survives without a spreader. The parameters that must agree before a Ku band driver is replaced are listed on the amplifier cross reference hub, the gate bias and filter parts around it are under RF component sourcing, and stock is quoted from the amplifiers and comparators index.
Request Quote — In Stock, 100% New & Original, Full Warranty