Contact Us

UCC27424MDGNREP

Brand: Texas Instruments
Texas Instruments UCC27424MDGNREP is a power management component designed for AI Servers & Low-Altitude Economy (Drone and UAV) and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

UCC27424MDGNREP — Power Management & Signal Chain | Superb Automation

UCC27424MDGNREP

Texas Instruments — Power Management & Signal Chain

Product Overview

The UCC27424MDGNREP from Texas Instruments is a power management / signal chain IC delivering high efficiency, precision regulation, and robust protection. Texas Instruments (TI) is a global leader in analog ICs, power management solutions, and embedded processors.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-efficiency power conversion with low quiescent current
  • Wide input voltage range with precision output regulation
  • Integrated over-current, over-temperature, and short-circuit protection
  • Small footprint packaging for space-constrained designs
  • AEC-Q100 qualified options available for automotive applications
  • Flexible sequencing and soft-start control

Key Specifications

Input VoltageV
Output VoltageV
Output CurrentA
Switching FrequencykHz
Efficiency%
Quiescent CurrentµA
Topology—
Package—
Operating Temp°C
Protection—

Applications

Industrial Automation Automotive Electronics Telecom Infrastructure Server & Data Center Power Medical Devices Consumer Electronics

Request Quote — In Stock, 100% New & Original, Full Warranty

UCC27424MDGNREP: a dual 4 A driver qualified to minus 55 C

The UCC27424MDGNREP is the enhanced product version of a dual 4 A low side driver, with each channel carrying its own enable pin, a 4.5 V to 15 V supply range and a temperature rating that starts at minus 55 C. That cold end is the reason the part exists: a standard industrial driver is specified from minus 40 C, and a system that has to start on a flight line in winter or in a cold chamber test needs the wider window and the enhanced qualification record that goes with it.

The output stage is a bipolar and CMOS hybrid that holds current through the Miller plateau, which is where a plain CMOS driver loses drive strength as the gate voltage rises. Rise time is 20 ns typical and fall 15 ns into a 1.8 nanofarad load, propagation delay is 25 ns falling and 35 ns rising, and the two channels can be paralleled for a single 8 A drive. The thermally enhanced PowerPAD MSOP body has a junction to case thermal resistance of 4.7 C per watt, which is what allows both channels to run hard at the same time, provided the pad is soldered down and the copper under it is continuous, because the 4.7 C per watt figure assumes the pad is the heat path rather than a floating surface, so a via array under the pad is part of the thermal answer.

Key electrical data for the UCC27424MDGNREP

DriveDual 4 A peak, non-inverting, each channel with its own enable pin
Supplies4.5 V to 15 V, TTL and CMOS compatible inputs independent of the supply
Timing20 ns typical rise and 15 ns typical fall at 1.8 nF, 25 ns falling and 35 ns rising propagation
Thermal4.7 C per watt junction to case in the PowerPAD MSOP body
GradeSpecified -55 C to 125 C, enhanced product flow
ParallelThe two outputs can be tied together for a single 8 A drive

Package, marking and reel data

BodyDGN, 8 pin HVSSOP with exposed PowerPAD, 3.0 mm by 3.0 mm
Reel2500 pieces on a large reel, this is the only published packing
FinishNIPDAU on the plain row, NIPDAUAG on the .A row, both level 1 at 260 C
Marking424E on the top, the M in the code is the enhanced product identifier

Where minus 55 C is a requirement rather than a margin

The enhanced product flow adds a qualification record, a wider temperature window and a test history, not a different die. A customer who buys this part is buying the paper as much as the silicon: the test data has to show operation at minus 55 C, and a standard industrial part cannot be substituted on that basis even though it works on the bench at room temperature. Defense, aerospace and medical transport are the usual buyers, and the documentation package is what the auditor asks for.

The electrical case is the same as the industrial dual driver: the same output stage, the same enable logic and the same propagation delay. Two channels with independent enables let one half of a bridge be shut down while the other keeps switching, and the parallel option gives 8 A when a single large MOSFET needs it. The PowerPAD has to be soldered to a copper area connected to ground, because 4.7 C per watt is a junction to case figure and the case is the pad. Our defense grade components page covers the record set we ship with enhanced product parts.

Buyer questions on the UCC27424MDGNREP

Is the enhanced product part the same die as the industrial one? It is the same function and the same body, with a wider temperature qualification and an enhanced flow. The order code carries an M to identify it, and that is what the qualification record is written against.

Can the two outputs be paralleled safely? The vendor states they can, and with 25 ns and 35 ns propagation difference between channels the two outputs are not exactly simultaneous, so a small series resistor on each output is the usual practice.

Does it need a heat sink? No, but the exposed pad must be soldered to copper. With 4.7 C per watt and both channels driving 4 A, the pad is the only thermal path that matters.

Availability and cross reference

This code ships 2500 pieces per reel and is the only published packing. The enhanced product flow means the lot has to be traceable and the qualification record has to ship with it, so a broker offer without paperwork is not usable on the builds this part is bought for. Our sourcing audit trail page describes the documents that travel with an enhanced product shipment.