Contact Us

TPS7A0233DBVR

Brand: Texas Instruments
Texas Instruments TPS7A0233DBVR is a power management component designed for AI Servers & Low-Altitude Economy (Drone and UAV) and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

TPS7A0233DBVR — Power Management & Signal Chain | Superb Automation

TPS7A0233DBVR

Texas Instruments — Power Management & Signal Chain

Product Overview

The TPS7A0233DBVR from Texas Instruments is a power management / signal chain IC delivering high efficiency, precision regulation, and robust protection. Texas Instruments (TI) is a global leader in analog ICs, power management solutions, and embedded processors.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-efficiency power conversion with low quiescent current
  • Wide input voltage range with precision output regulation
  • Integrated over-current, over-temperature, and short-circuit protection
  • Small footprint packaging for space-constrained designs
  • AEC-Q100 qualified options available for automotive applications
  • Flexible sequencing and soft-start control

Key Specifications

Input VoltageV
Output VoltageV
Output CurrentA
Switching FrequencykHz
Efficiency%
Quiescent CurrentµA
Topology—
Package—
Operating Temp°C
Protection—

Applications

Industrial Automation Automotive Electronics Telecom Infrastructure Server & Data Center Power Medical Devices Consumer Electronics

Request Quote — In Stock, 100% New & Original, Full Warranty

TPS7A0233DBVR: 3.3 V at 200 mA in a five pin SOT-23

The TPS7A0233DBVR is the 3.3 V fixed member of the TPS7A02 family from Texas Instruments, supplied in the five pin SOT-23 body coded DBV rather than the X2SON used by most of the family. It ships 3000 pieces per reel with a tin finish, moisture level 1, marking 29QT, and it delivers 200 mA while drawing 25 nanoamps at no load.

The 3.3 V point is the most used voltage in this family and the one with the least headroom in a 5 V system. The dropout band from 2.5 V to 3.3 V is 310 mV maximum to 85 degrees and 360 mV maximum over the full range at 200 mA, so a 5 V bus runs the part with 1.7 V to spare and a 3.6 V bus leaves only 300 mV and needs the load kept below full current. From a 3.3 V input the part is in dropout by definition and behaves as a switch with 25 nA of ground current, which is a legitimate use in a battery product but not a regulated rail.

Key electrical data for the 3.3 V point

Output voltage3.3 V fixed, plus or minus 1 percent at 25 C and 1.5 percent over -40 to 125 C
Output current200 mA continuous, current limit 240 mA to 750 mA
Input range1.5 V to 6.0 V, 3.66 V needed at 200 mA over the full temperature range
Quiescent current25 nA typical at 25 C, 46 nA maximum, 60 nA maximum to 85 C
Dropout310 mV maximum at 200 mA to 85 C, 360 mV maximum over the full range
Rejection and noise55 dB at 1 kHz and 30 mA, 130 uV RMS at 0.8 V over 10 Hz to 100 kHz

Package, marking and reel data

BodySOT-23 DBV, 5 pins, 2.9 mm by 2.8 mm
Reel3000 pieces, large tape and reel
Finish and moisturetin, level 1, unlimited floor life
Marking29QT
Thermal resistance181.9 C per W junction to ambient in the five pin body

Where a 3.3 V nanopower rail is used

A 3.3 V rail at 200 mA covers a microcontroller, a radio in receive and a sensor front end at the same time, which is why this voltage dominates battery instruments. The family is written for wearables, thermostats, smoke and heat detectors, meters, glucose monitors, pulse oximeters, circuit breakers, security cameras and card readers, and the common thread in all of them is a supply that has to be present for years and deliver a burst of current occasionally.

The transient specification is what makes a single rail possible. The device settles a 1 mA to 50 mA step in under 10 microseconds with about 100 mV of undershoot, so a radio that wakes and transmits for a few milliseconds does not need a separate bulk reservoir on the rail. The start up time is 1200 to 1600 microseconds for outputs above 3.0 V, longer than the lower voltage members, so a sequencer has to allow about 1.6 ms before the next rail is enabled.

The SOT-23 body is the practical choice for prototypes, low volume builds and repair depots, where a 1 mm X2SON cannot be placed or reworked by hand. The thermal resistance is 181.9 C per W against 179.1 for the X2SON, so the electrical performance is effectively the same and the decision is mechanical. At 200 mA from 5 V to 3.3 V the dissipation is 0.34 W and the rise is 62 degrees, which is acceptable but not generous in a closed enclosure.

Buyer questions on this order code

Is the tin finish a problem for a lead free line? No, the finish is lead free and the part is moisture level 1. The row is listed with tin rather than nickel palladium gold, which matters for solderability and for whisker policy in some programmes, so the offer states the finish.

Can this part run from a 3.3 V bus? It will pass the input through with 25 nA of ground current, because the pass device is in dropout. That is not a regulated 3.3 V rail, so a system that needs regulation from a 3.3 V bus needs a different topology.

What is the difference against the X2SON member? The die and the electrical table are the same, and the thermal resistance differs by less than 2 percent. The X2SON is smaller and the SOT-23 can be handled by hand and inspected visually.

Sourcing the TPS7A0233DBVR through SUPERB

SUPERB quotes this order code in the SOT-23 body with the finish and the marking stated, since the same voltage is available in the X2SON body with a different finish and a different reel label. The 29QT marking and the level 1 moisture class are verified on receipt.

Where the rail is one line of a larger bill, the one stop BOM sourcing page covers consolidating the order, and material requirements planning covers the forecast side. Send the quantity and the build schedule and the answer follows.