Contact Us

UCC28C42DR

Brand: Texas Instruments
Texas Instruments UCC28C42DR is a power management component designed for AI Servers & Low-Altitude Economy (Drone and UAV) and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

UCC28C42DR — Power Management & Signal Chain | Superb Automation

UCC28C42DR

Texas Instruments — Power Management & Signal Chain

Product Overview

The UCC28C42DR from Texas Instruments is a power management / signal chain IC delivering high efficiency, precision regulation, and robust protection. Texas Instruments (TI) is a global leader in analog ICs, power management solutions, and embedded processors.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-efficiency power conversion with low quiescent current
  • Wide input voltage range with precision output regulation
  • Integrated over-current, over-temperature, and short-circuit protection
  • Small footprint packaging for space-constrained designs
  • AEC-Q100 qualified options available for automotive applications
  • Flexible sequencing and soft-start control

Key Specifications

Input VoltageV
Output VoltageV
Output CurrentA
Switching FrequencykHz
Efficiency%
Quiescent CurrentµA
Topology—
Package—
Operating Temp°C
Protection—

Applications

Industrial Automation Automotive Electronics Telecom Infrastructure Server & Data Center Power Medical Devices Consumer Electronics

Request Quote — In Stock, 100% New & Original, Full Warranty

UCC28C42DR: a current mode PWM controller with a 5 V reference, a 14.5 V start threshold and a 35 ns current sense to output delay, in the eight pin SOIC on a 2500 piece reel

UCC28C42DR is a fixed frequency peak current mode controller for offline and DC to DC converters that drives an external FET gate directly, and that is pin compatible with the UC3842 generation it replaces in a SOIC body of 8 pins. The D body is the eight pin SOIC and the DGK body is the eight pin VSSOP, both at 2500 pieces on a reel, and the pinout matches the older UCx84x parts so a board that used those does not change.

Order code and package

Catalogue stringUCC28C42DR, where 28C42 is the industrial temperature member with the 14.5 V start threshold, D is the eight pin SOIC and R is the large reel
BodySOIC, D outline, eight pins, with the VSSOP DGK body available at the same reel quantity for boards that need the smaller outline
Reel2500 pieces on a reel for both the SOIC and the VSSOP strings, so the body choice does not change the packing
StatusActive in production on the current addendum, while the G4 row of the same string is listed Obsolete
Finish and moistureNIPDAU at moisture level 1 for 260 C with no floor life limit
Temperatureminus 40 to 125 C for the 28C4x series, against zero to 85 C for the 38C4x series on the same die
Marking28C42 on the body, with the 43 marking belonging to the adjacent row in the addendum table
DocumentSLUS458I, July 2000, revised June 2024, a document that has been kept current through twenty four years of revisions

Electrical parameters that decide the application

Reference5.0 V nominal with a 4.9 V to 5.1 V window at 25 C and 1 mA, which is the divider target rather than the 2.5 V printed in the page one feature list
Bias range20 V absolute maximum on VDD and 18 V recommended, which is what makes a start resistor from a rectified mains and an auxiliary winding the standard bias arrangement
Start threshold14.5 V typical on this member, with the turn off at 9 V, which gives 5.5 V of hysteresis and a start point above the operating range of a 12 V auxiliary rail
Lockout options8.4 V on and 7.6 V off on the 43 and 45 members, and 7 V on the 40 and 41, so the same die covers offline and battery fed converters
Maximum duty cycleapproaching 100 per cent on this member, against 50 per cent on the 41, 44 and 45 which use a toggle flip flop to blank every other clock
Switching frequency1 MHz maximum, with the oscillator set by a resistor to the reference and a capacitor to ground on the RT/CT pin
Supply current50 microamps of start current and 2.3 mA of operating current at 52 kHz, so the start resistor can be sized for the start current rather than for the run current
Current limit delay35 ns from the current sense pin crossing the threshold to the output falling, which is the figure that keeps the peak current overshoot small at high frequency
Drive strengthplus or minus 1 A peak with 25 ns rise and 20 ns fall, rail to rail, so a large FET can be driven without an external buffer at moderate frequency
Current sensecycle by cycle limiting with a 1 V sense threshold, blanked for the leading edge spike by the RC network on the sense pin
Thermalthe eight pin SOIC and the VSSOP bodies have different junction to ambient figures, so the same dissipation does not produce the same case temperature in the two outlines
Compatibilitypin to pin with the UCx84x and UCx84xA families, which is the reason this part exists rather than as a new architecture

Family variants and how they differ

40 and 417 V start threshold for battery systems, with the 41 limited to 50 per cent duty by the toggle flip flop
42 and 4414.5 V start and 9 V stop for offline converters, with the 44 limited to 50 per cent duty
43 and 458.4 V start and 7.6 V stop for regulated DC inputs, with the 45 limited to 50 per cent duty
38C4x seriesthe same six functions at zero to 85 C, the commercial grade of the same die
Predecessorsthe UCx84x bipolar family is pin compatible, and this part is the enhanced replacement with lower start and run current
PackagesSOIC and VSSOP at 2500 pieces, with the G4 lead free row of the SOIC marked Obsolete while the plain row remains in production

Points to check before this part goes on a BOM

The reference on this page is 5.0 V in the electrical table and the page one feature list says 2.5 V. The table is the number to build a divider against: 4.9 V to 5.1 V at 25 C and 1 mA. A divider copied from the feature bullet produces an output about twice the intended value, which is the kind of error that destroys a load on first power up.

The 35 ns current sense to output delay is what makes this part usable at 1 MHz. At that frequency a 35 ns delay is 3.5 per cent of the period, so the peak current overshoot during a short circuit is bounded, while a controller with a 200 ns delay would let the current run several amps past the threshold before the gate moved.

The 14.5 V start with the 9 V stop is the offline combination and it is not interchangeable with the 43 or 45 members. A board built for the 8.4 V member will not start on a rectified mains bias, and a board built for this member will sit in lockout on a 12 V rail that never reaches 14.5 V.

The toggle flip flop on the 41, 44 and 45 halves the output frequency and caps the duty cycle at 50 per cent. On a single ended forward converter that is a requirement rather than a limitation, but on a flyback it halves the available duty range and the turns ratio has to account for it.

The start current of 50 microamps is what allows a resistor from a 400 V rail to charge the bias capacitor without dissipating continuously. The resistor has to pass the start current at the lowest line voltage and must stop supplying the controller once the auxiliary winding takes over, otherwise the resistor dissipates at all times and the bias capacitor sees a voltage above the 18 V recommended maximum.

The G4 row of UCC28C42DR is obsolete while the plain row is active, and the marking column in that addendum sits one row off. On a part number that is pin compatible with a dozen older types, the marking and the addendum row together are what confirm which die is on the reel.

Why a pin compatible part still needs a check

Pin compatibility means the board works, not that the converter behaves the same. The start and stop thresholds, the start current and the reference voltage are all set inside the part, and a substitution across the 40, 42 and 43 members changes all four while the footprint stays identical.

The two numbers that catch people out are the lockout window and the reference. A converter built for a 5 V reference with a divider set for 14.5 V lockout will not start and will not regulate if it is populated with the 8.4 V, 2.5 V member, and nothing on the silkscreen shows the difference.

Where this order code fits

Offline flyback and forward converters, AC to DC adapters, auxiliary and housekeeping supplies, board mounted DC to DC modules, and any board that was built around a UC3842 generation controller and needs lower start and run current Teams comparing it with a neighbouring part start from our Power Management Cross Reference page, and teams replacing a part that has gone end of life start from the Pin to Pin Cross Reference page.

Questions buyers ask

What is the reference voltage? 5.0 V in the electrical table, with a 4.9 V to 5.1 V window at 25 C. The page one feature bullet that says 2.5 V does not match the table and should not be used for a divider.

Can it replace a UC3842 directly? Yes, the pinout and the function match, and the vendor states pin to pin compatibility. The lockout window and the reference still have to be checked against the part being replaced.

Why is the start current so low? 50 microamps lets the bias capacitor be charged through a large resistor from the input rail, so the resistor does not dissipate while the converter runs from its auxiliary winding.

Does it need an external gate resistor? It delivers plus or minus 1 A with 25 ns edges, so a small series resistor is usual to control the turn on di/dt, but no buffer is needed for a typical TO-220 or D2PAK FET below a few hundred kilohertz.

SUPERB holds and sources this line for production and repair demand, quoted against the exact ordering string with date codes, packing and country of origin stated on the offer. When a part is moving, the How to Verify a Drop in Replacement page sets out the checks that keep a substitute from failing on the bench.