TMS320LF2407APGEA
Product Specifications
TMS320LF2407APGEA
Texas Instruments — Power Management & Signal Chain
Product Overview
The TMS320LF2407APGEA from Texas Instruments is a power management / signal chain IC delivering high efficiency, precision regulation, and robust protection. Texas Instruments (TI) is a global leader in analog ICs, power management solutions, and embedded processors.
Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.
Key Features
- High-efficiency power conversion with low quiescent current
- Wide input voltage range with precision output regulation
- Integrated over-current, over-temperature, and short-circuit protection
- Small footprint packaging for space-constrained designs
- AEC-Q100 qualified options available for automotive applications
- Flexible sequencing and soft-start control
Key Specifications
| Input Voltage | V |
| Output Voltage | V |
| Output Current | A |
| Switching Frequency | kHz |
| Efficiency | % |
| Quiescent Current | µA |
| Topology | — |
| Package | — |
| Operating Temp | °C |
| Protection | — |
Applications
Request Quote — In Stock, 100% New & Original, Full Warranty
TMS320LF2407APGEA: 144 pin DSP controller with an external memory interface, specified from minus 40 to 85 C
TMS320LF2407APGEA is the superset of the 240xA generation: a 40 MHz C2xx core with both event managers, sixteen PWM channels, a 16 channel 10 bit ADC and a full external memory bus on 144 pins in a LQFP body of 144 pins. The PGE body brings out program, data and I/O spaces on a 16 bit address and 16 bit data bus, which is the one feature the smaller 240xA bodies give up. Both event managers are pinned out, so all sixteen compare channels, six capture inputs and two encoder interfaces are available at once. Flash is 32K words in four sectors of 4K, 12K, 12K and 4K, RAM is 2K words single access plus 544 words dual access, and the A at the end of the code is the minus 40 to 85 C grade.
Order code and package
| Order code | TMS320LF2407APGEA |
| Core | TMS320C2xx fixed point DSP, 40 MHz |
| Package | LQFP, 144 pins, body code PGE |
| Flash | 32K words x 16 bits in four sectors |
| RAM | 2K words single access plus 544 words dual access |
| PWM | 16 compare channels across EVA and EVB |
| ADC | 10 bit, 16 inputs, 500 ns minimum conversion |
| Serial | CAN, SCI and SPI |
| External bus | 16 bit address and 16 bit data, 64K program, 64K data and 64K I/O |
| Supply | 3.3 V, 3.0 to 3.6 V |
| Temperature | minus 40 to 85 C, A option |
| Datasheet | SPRS145L, revised September 2007 |
Electrical parameters that decide the application
| Instruction cycle | 25 ns, 40 MIPS |
| PWM channels | 16, in two event managers with three compare units each |
| Deadband | programmable per event manager, applied to the complementary pair |
| Power drive protection | PDPINTA and PDPINTB, both force the PWM outputs high impedance |
| Capture and encoder | six capture inputs, two quadrature encoder interfaces |
| ADC sequencer | twin autosequencer, up to 16 conversions per session without CPU load |
| Digital I/O | 41 shared pins |
| Watchdog | on chip, with its own clock |
| PLL | on chip, multiplies the crystal to the 40 MHz core clock |
| Bus timing | programmable wait states for external memory |
| Code security | flash readout lock available |
| JTAG | 1149.1 scan chain, boundary scan not supported on this family |
Points to check before this part goes on a BOM
The external bus is the whole reason this body exists, and it has a cost. Every access to external memory runs at the bus rate with programmable wait states, so a lookup table or a trace buffer in external SRAM is several times slower than the same table in the 2K words of internal single access RAM. Put the inner loop tables in internal RAM and leave the bus for logging.
Sixty four kilowords of program, data and I/O space are visible, and the bus is 3.3 V. Mixing a 5 V peripheral on that bus needs level translation on every line, including the strobes, and the extra delay from the translator has to be added to the wait state count or reads come back one cycle late.
Sixteen PWM channels come from two event managers, and the deadband and the protection inputs belong to the event manager rather than to the pin. That matters when a board uses one event manager for a motor and the other for a power factor stage: the fault input that shuts down the motor does not automatically shut down the second stage.
The A grade stops at 85 C. Cabinets that reach 90 C at the top of the enclosure are outside the specification even though the junction calculation looks comfortable, because the flash access time and the ADC reference both shift with temperature. The same die is sold as the S grade to 125 C under the code TMS320LF2407APGES.
Flash is 32K words across four sectors with 4K at each end. A loader that sits in the first 4K sector survives an application erase in the 12K sectors, which is the usual arrangement for a field update over CAN or SCI. The erase granularity is a sector, so a parameter block has to live in a sector of its own or in the dual access RAM.
The 10 bit ADC has sixteen inputs and a twin autosequencer, and conversion takes 500 ns per channel at minimum. With both event managers running, the ADC trigger source has to be assigned deliberately, otherwise two sequencers start on the same event and the second result set overwrites the first.
Where this order code fits
Boards that need more than one power stage, an external SRAM for data logging, or a host interface through the external bus: multi axis servo drives, welding and induction heating supplies, grid tied inverter control, and instrument platforms that keep a lookup table or a trace buffer outside the processor. Boards comparing it with a neighbouring part start from our MCU Cross Reference page, and boards replacing a part that has gone end of life start from the Pin to Pin Cross Reference page.
Questions buyers ask
Does the external bus support a 16 bit SRAM without glue logic? Yes, with programmable wait states and the usual strobes. The bus is 16 bit address and 16 bit data, so a single 64K x 16 SRAM connects directly. A byte wide device or a 5 V device needs extra logic and extra wait states.
Can I run this part at 125 C if I keep the junction below the limit? No. The A grade is specified to 85 C ambient, and the flash timing, the PLL and the ADC reference are all specified inside that window. Use the S grade, code TMS320LF2407APGES, when the cabinet runs hotter.
Is the 2407A still the right part for a new board? Only where the C2xx code base already exists and requalification is expensive. For new work the C2000 generations that came later give more flash and a faster core at a similar pin count, and we will quote either path against the same BOM.
SUPERB holds and sources this Texas Instruments line for production and repair demand, quoted against the exact ordering string with date codes, packing and country of origin stated on the offer. When a line is moving, the Obsolete RF Part Replacement page sets out the checks that keep a substitute from failing on the bench.