Contact Us

LM239D

Brand: Texas Instruments
Texas Instruments LM239D is a power management component designed for Industrial Automation and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

LM239D — Power Management & Signal Chain | Superb Automation

LM239D

Texas Instruments — Power Management & Signal Chain

Product Overview

The LM239D from Texas Instruments is a power management / signal chain IC delivering high efficiency, precision regulation, and robust protection. Texas Instruments (TI) is a global leader in analog ICs, power management solutions, and embedded processors.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-efficiency power conversion with low quiescent current
  • Wide input voltage range with precision output regulation
  • Integrated over-current, over-temperature, and short-circuit protection
  • Small footprint packaging for space-constrained designs
  • AEC-Q100 qualified options available for automotive applications
  • Flexible sequencing and soft-start control

Key Specifications

Input VoltageV
Output VoltageV
Output CurrentA
Switching FrequencykHz
Efficiency%
Quiescent CurrentµA
Topology—
Package—
Operating Temp°C
Protection—

Applications

Industrial Automation Automotive Electronics Telecom Infrastructure Server & Data Center Power Medical Devices Consumer Electronics

Request Quote — In Stock, 100% New & Original, Full Warranty

LM239D: the quad comparator in a tube, for the build before the reel

LM239D is the 14 pin SOIC quad comparator supplied in a tube. Electrically it is the same part as the reel string: same die, same offset grade, same minus 25 to plus 85 degree window. The difference is the carrier, and the carrier decides who buys which.

A tube is 50 pieces, hand fed or loaded into a small batch feeder, and it is what a prototype house, a repair centre and a low volume instrument builder order. A reel is 2500 pieces and it is what a production line orders. Buying a reel for a 200 piece build leaves 2300 pieces in a moisture bag that nobody wants to count.

Because the part is cheap and the family is second sourced, the tube string is also the one that appears in catalogues long after the reel has gone short. That is worth knowing when a build is scheduled and the distributor shows stock in one carrier only.

The electrical rows, unchanged by the carrier

Offset is 2 millivolts typical and 5 millivolts maximum at room temperature, and the maximum holds across the full minus 25 to plus 85 degree window. Bias current is 25 nanoamps typical and 250 maximum, so a divider above 100 kilo ohms starts to see the bias rather than the ratio.

The input range includes ground and stops 1.5 volts below the positive rail at 25 degrees. The output is an open collector rated to 30 volts with a 16 milliamp sink at 1.5 volts, and the response time is 1.3 microseconds typical.

Orderable codeLM239D
Comparators per body4
BodySOIC, 14 pins
Carriertube, 50 pieces
Offset at 25 degrees2 millivolts typical, 5 maximum
Bias current25 nanoamps typical, 250 maximum
Common mode rangeground to 1.5 volts below the positive rail
Outputopen collector, 30 volts, 16 milliamps sink
Supply current0.8 milliamps typical at 5 volts
Response time1.3 microseconds typical
Temperature windowminus 25 to plus 85 degrees

Tube handling and the moisture question

A tube is not a sealed environment. The parts sit in a plastic channel with the leads exposed, and a tube that has been open on a shelf for a year has absorbed whatever the room offered. The body is rated at moisture level 1, so no bake is required by the specification, but a tube that has been stored in a humid workshop still deserves an hour at 125 degrees before reflow if the boards are expensive.

The other handling issue is lead coplanarity. A tube that has been dropped puts the leads out of plane, and a 14 pin SOIC with a bent lead is a solder bridge waiting to happen. Inspect the first few parts from any tube that has travelled, and use a fresh tube for a build that matters.

For a repair or a field replacement, the tube is the only sensible carrier: one part, no reel, no leftover stock. That is the reason the string stays in the catalogue.

The divider that sets four thresholds

Four comparators in one body usually share one reference string with four taps, and the string is where most of the accuracy is lost. A 1 percent resistor gives a threshold that is 1 percent away from nominal, which on a 5 volt rail is 50 millivolts, and that error is ten times the offset of the comparator.

The current through the string is the other half of the choice. A 10 kiloohm string draws 0.5 milliamps from 5 volts, which is the same order as the comparator supply current and is usually acceptable on a board that already has a regulator. A 100 kiloohm string draws 50 microamps and starts to see the 250 nanoamp bias current as a 25 millivolt threshold shift.

String resistance10 kiloohms100 kiloohms
Current at 5 volts0.5 milliamps50 microamps
Bias current error, worst case2.5 millivolts25 millivolts
Resistor tolerance error at 1 percent50 millivolts50 millivolts
Trimmer needednot usuallyrecommended

The table points at the practical answer. On a board with 1 percent resistors the bias current is a second order term at 10 kiloohms and a first order term at 100 kiloohms, so the lower resistance string is the better default unless the standing current matters. On a battery powered board the trade reverses and the thresholds have to be trimmed or the resistors have to be 0.1 percent.

The divider also needs a capacitor at each tap when the thresholds are compared against a noisy signal. A 100 nanofarad capacitor at the tap forms a low pass filter with the Thevenin resistance of the string, and that filter is what stops the comparator following every switching transient on the rail.

What a small build needs from the quad

A 200 piece instrument build needs four thresholds and a reference, and the quad gives it in one placement. The reference divider is shared, the pull-up is shared if the outputs are wire OR, and the decoupling is one capacitor.

At that volume the offset grade matters less than the consistency between units. All four comparators sit on the same die, so their offsets track with temperature and with the lot. That tracking is worth more than an absolute 2 millivolt window on a product whose thresholds are set by a divider with 1 percent resistors.

The tube also suits a build where the boards are assembled in house in small batches. A reel needs a feeder and a machine; a tube needs a pair of tweezers and a steady hand, and at 200 pieces the hand is competitive.

One reference, four thresholds, and the error budget

A quad comparator in a small build is usually paired with a shunt reference and a resistor string. The reference contributes its initial accuracy, its temperature coefficient and its load regulation, and the string contributes its tolerance and its bias current error. The comparator contributes its offset and its offset current.

For a 2.5 volt reference at 0.5 percent and a string of 1 percent resistors, the reference and the string already account for 1.5 percent of the threshold, which on a 2 volt threshold is 30 millivolts. The comparator adds 5 millivolts at room temperature and the same over the window, so the comparator is the smallest term in the budget and the money is better spent on the reference.

That ordering changes on a 1 percent reference and 0.1 percent resistors, where the comparator becomes the dominant term and the A grade pays for itself. It is worth running the arithmetic before choosing the grade, because the price difference between the base and the A grade is usually larger than the price difference between a 1 percent and a 0.1 percent resistor.

Substitution between the carriers and between the grades

LM239D, LM239DR and LM239ADR are interchangeable on the board. The D and DR differ only in carrier. The A grade has a tighter offset, 2 millivolts maximum at room temperature, and costs more.

Substituting the LM339 for the LM239 narrows the temperature window to 0 to 70 degrees. Substituting the LM2901 widens it to minus 40 to plus 125 and loosens the offset to 7 millivolts. Neither substitution is invisible on a threshold chain, and both are common on a distributor's suggested alternative list.

Our pin to pin cross reference page covers the family equivalents pin by pin, and the component lead time page covers what to do when only one carrier is on the shelf.

Buying questions that come with this code

How many pieces are in the tube? Fifty, for the 14 pin SOIC body.

Can tube parts be used on a placement machine? Yes, in a small batch feeder or a tray conversion. At production volume the reel is faster and cheaper per piece.

Is the tube part older stock? Not necessarily. The date code on the tube label is the production week, and it is printed on every tube.