ISO7721DWR
Product Specifications
ISO7721DWR
Texas Instruments — Power Management & Signal Chain
Product Overview
The ISO7721DWR from Texas Instruments is a power management / signal chain IC delivering high efficiency, precision regulation, and robust protection. Texas Instruments (TI) is a global leader in analog ICs, power management solutions, and embedded processors.
Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.
Key Features
- High-efficiency power conversion with low quiescent current
- Wide input voltage range with precision output regulation
- Integrated over-current, over-temperature, and short-circuit protection
- Small footprint packaging for space-constrained designs
- AEC-Q100 qualified options available for automotive applications
- Flexible sequencing and soft-start control
Key Specifications
| Input Voltage | V |
| Output Voltage | V |
| Output Current | A |
| Switching Frequency | kHz |
| Efficiency | % |
| Quiescent Current | µA |
| Topology | — |
| Package | — |
| Operating Temp | °C |
| Protection | — |
Applications
Request Quote — In Stock, 100% New & Original, Full Warranty
ISO7721DWR: dual-channel reinforced digital isolator at 100 Mbps with one channel each way
ISO7721DWR is two reinforced isolation channels at 100 Mbps, one forward and one reverse in a SOIC body of 16 pins. The 7721 arrangement is one channel each way in the wide body, which is the version rated 5000 V RMS. Both channels run at 100 Mbps from supplies between 2.25 V and 5.5 V, and the barrier carries a 30 year life projection at 1500 V RMS working voltage with a 12.8 kV surge capability.
Order code and package
| Order code | ISO7721DWR |
| Function | dual-channel reinforced digital isolator |
| Package | SOIC, 16 pins, DW wide body |
| Channels | two, one forward and one reverse |
| Data rate | 100 Mbps |
| Supply range | 2.25 V to 5.5 V on each side |
| Isolation | 5000 V RMS in this wide body, 3000 V RMS in the 8-pin body |
| Surge capability | up to 12.8 kV |
| Transient immunity | 100 kV per microsecond typical |
| Barrier life | over 30 years at 1500 V RMS working voltage |
| Default output | high on the plain code, low on the F version |
| Temperature range | minus 40 to plus 125 C |
Electrical parameters that decide the application
| Barrier | silicon dioxide, reinforced |
| Esd | 8 kV IEC 61000-4-2 contact discharge across the barrier |
| Level translation | 2.25 V to 5.5 V on each side, any combination |
| Emc | system level ESD, EFT and surge immunity, low emissions |
| Certifications | VDE 0884-17 reinforced, UL 1577, IEC 61010-1, IEC 62368-1, IEC 60601-1, GB 4943.1 |
| Channel direction | one forward, one reverse, fixed in silicon |
| Output | CMOS push pull |
| Channel count | two in this body |
Points to check before this part goes on a BOM
The wide body is the reason to order the DW code instead of the 8-pin version of the same die. It carries the 5000 V RMS rating, and a reinforced barrier at mains voltage needs that rating together with the creepage the 16-pin body provides.
One channel each way suits a request and reply link, and the direction is fixed in silicon. A board that needs a second return channel takes the triple or quad part rather than trying to use the reverse channel for two signals through an external multiplexer, which would put a switch on the isolated side of the barrier.
The 30 year life projection at 1500 V RMS working voltage is a statement about the silicon dioxide barrier. It is the number a medical or industrial product file uses when the product has to outlive its warranty by a wide margin, and it is not the same as the one minute withstand rating.
Twelve point eight kilovolts of surge capability is what separates a reinforced isolator from a basic one on a surge test. The barrier that fails a 6 kV surge is usually the one that was chosen on data rate alone, because the surge figure is not in the comparison table that most buyers start from.
Where this order code fits
Isolated SPI and UART links, medical instrument interfaces and charger control boards order this code where the barrier has to be reinforced and the traffic runs both ways. Boards comparing it with a neighbouring part start from our Medical Device Components page, and boards replacing a part that has gone end of life start from the Component Lead Time Solutions page.
Questions buyers ask
Is this part reinforced or basic? Reinforced, per VDE 0884-17, in the wide body only. The 8-pin body of the same family is rated lower.
Does it work with different supplies on each side? Yes, from 2.25 V to 5.5 V independently, with level translation in both directions.
SUPERB holds and sources this Texas Instruments line for production and repair demand, quoted against the exact ordering string with date codes, packing and country of origin stated on the offer. When a line is moving, the Incoming Inspection Plan page sets out the checks that keep a substitute from failing on the bench.