Contact Us

INA133UA-2K5

Brand: Texas Instruments
Texas Instruments INA133UA-2K5 is a power management component designed for Industrial Automation and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

INA133UA-2K5 — Power Management & Signal Chain | Superb Automation

INA133UA-2K5

Texas Instruments — Power Management & Signal Chain

Product Overview

The INA133UA-2K5 from Texas Instruments is a power management / signal chain IC delivering high efficiency, precision regulation, and robust protection. Texas Instruments (TI) is a global leader in analog ICs, power management solutions, and embedded processors.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-efficiency power conversion with low quiescent current
  • Wide input voltage range with precision output regulation
  • Integrated over-current, over-temperature, and short-circuit protection
  • Small footprint packaging for space-constrained designs
  • AEC-Q100 qualified options available for automotive applications
  • Flexible sequencing and soft-start control

Key Specifications

Input VoltageV
Output VoltageV
Output CurrentA
Switching FrequencykHz
Efficiency%
Quiescent CurrentµA
Topology—
Package—
Operating Temp°C
Protection—

Applications

Industrial Automation Automotive Electronics Telecom Infrastructure Server & Data Center Power Medical Devices Consumer Electronics

Request Quote — In Stock, 100% New & Original, Full Warranty

INA133UA-2K5: the wider offset bin on a reel, twice the window for a lower price step

The INA133UA-2K5 is the A grade of the fast difference amplifier on a 2500 piece reel. The offset window is 900 µV maximum referred to the output against 450 on the U bin, the gain error is 0.1 per cent against 0.05, and the minimum common mode rejection is 74 dB against 80. Everything else is identical: 1.5 MHz, 5.5 microseconds of settling, 950 µA, the same 25 kΩ network and the same wide input range.

On a servo feedback path the wider window costs nothing, because the loop corrects a static offset. On a shunt monitor the 900 µV is 0.9 per cent of a 100 mV signal and 9 per cent of a 10 mV signal, which is why the grade exists as a choice rather than as a single row.

The INA133UA-2K5 rows as the addendum publishes them

Part classHigh speed unity gain difference amplifier, trimmed 25 kΩ network
Vendor statusActive, production
Data sheetSBOS115B, revised January 2026
Addendum rowINA133UA/2K5, 2500 pieces on a large reel
GradeA suffix, 900 µV maximum offset
Gain1 V/V fixed
Input offset voltage900 µV maximum at plus or minus 15 V, 1500 at plus or minus 5 V
Offset drift5 µV per degree maximum
Gain error0.1 per cent maximum
Gain nonlinearity0.002 per cent of full scale
Common mode rejection74 dB minimum, 90 dB typical
Input impedance50 kΩ differential, 25 kΩ common mode
Common mode range2 times each supply minus 3 V
Bandwidth1.5 MHz small signal
Settling5.5 µs to 0.01 per cent
Supply rangePlus or minus 2.25 V to plus or minus 18 V
Quiescent current950 µA typical
BodySOIC, D outline, 8 pins
Carrier2500 pieces on a large reel
Moisture levelLevel 3, 260 degrees, 168 hour floor life

1.5 MHz at unity gain from a difference amplifier

INA133UA-2K5 is the fast member of the unity gain difference amplifier group: 1.5 MHz of small signal bandwidth against the 300 kHz of the INA132, with the same on-chip resistor network and the same eight pin body. The bandwidth is what a servo feedback path or a string inverter current loop needs, because a 20 kHz loop with 60 degrees of phase margin wants an amplifier an order of magnitude faster than the loop, and a 300 kHz part leaves no margin.

The network is four 25 kohm resistors trimmed as a set, giving a differential input impedance of 50 kohm and a common mode impedance of 25 kohm. Gain is fixed at 1 V/V, gain error is 0.05 per cent maximum on the U bin and 0.1 per cent on the UA bin, and nonlinearity is 0.001 and 0.002 per cent of full scale. At unity gain the offset is quoted referred to the output, so the input and output numbers are the same.

A common mode range of twice the supply, minus three volts

The input common mode range of INA133UA-2K5 extends beyond both rails: from 2 times the negative rail plus 3 V to 2 times the positive rail minus 3 V. On a plus or minus 15 V supply that is minus 27 V to plus 27 V, and on a plus or minus 5 V supply it is minus 7 V to plus 7 V. The absolute maximum input is 80 V, so the part survives a common mode it cannot measure, which is the useful half of the specification on an industrial rack where a transducer cable can pick up a fault voltage.

That range is what allows the part to sit directly across a shunt in a motor leg or a battery string, where the common mode is neither near ground nor inside the supply. It also means the inputs are not protected by the supply rails: a 40 V common mode on a plus or minus 5 V supply is inside the input window and outside the supply, and the output will do something the loop may not expect. The window has to be checked against the supply, not assumed from it.

Two chip origins, and 5 against 20 volts per microsecond

The same part number can arrive from two fabrication flows, and the vendor labels the difference by chip site origin. On INA133UA-2K5 the slew rate is 5 volts per microsecond on the SHE flow and 20 volts per microsecond on the RFB flow, a factor of four on a row that no distributor listing shows. Voltage noise moves the other way: 57 nanovolts per root hertz at 1 kHz on SHE and 20 on RFB, and the common mode rejection minimum moves from 80 to 74 dB between the U and UA bins on top of that.

For a servo loop running at a few kilohertz either flow is fine. For a channel that has to settle in a few microseconds after a multiplexer step, the 5 volt per microsecond flow is a 20 microsecond edge on a 10 V step and the RFB flow is 5 microseconds, which is the difference between a working scan rate and a specification that is met only on paper. The flow is printed on the reel label and in the lot record, not on the part.

950 microamps, 5.5 microseconds and the dual INA2133

Quiescent current on INA133UA-2K5 is 950 microamps typical, which is five times the INA132 and the price of the 1.5 MHz bandwidth. Settling to 0.01 per cent takes 5.5 microseconds, short circuit current is 32 mA source and 25 mA sink on the SHE flow and 70 mA both ways on RFB, and the output is stable into 1000 pF. Output swing stops 1.5 V short of each rail under a gain error condition, which on plus or minus 15 V leaves plus or minus 13.5 V of usable range.

The single channel is the eight pin SOIC. The dual INA2133 is the fourteen pin SOIC with two independent channels at 8.65 by 6 mm, sold in 50 piece tubes, and it is specified over minus 55 to plus 125 degrees rather than the minus 40 to plus 85 of the single. On a multi channel board the dual saves one package and one reel but costs board area, and the wider temperature range is worth having when the board sits near a heatsink.

450 microvolts on the U and 900 on the UA

The offset window on INA133UA-2K5 is 450 microvolts maximum on the U bin and 900 microvolts on the UA bin at a plus or minus 15 V supply, doubling to 750 and 1500 microvolts at plus or minus 5 V, with a drift of 5 microvolts per degree on both. The supply dependence is unusual and worth reading twice: the same part is twice as loose on a 10 V total supply as on 30 V, so a 5 V single rail application starts with a 1.5 mV window on the UA bin.

Because the offset is referred to the output and the gain is one, a 900 microvolt offset is 900 microvolts at the output, which against a 2 V full scale is 0.045 per cent and against a 100 mV shunt signal is 0.9 per cent. On a shunt monitor that is a real error and it is why the U bin exists; on a servo feedback path it is trimmed by the loop. Long term stability is 0.3 microvolts per month on both bins.

The 25 kohm network loads the source and unbalances it

Each input of INA133UA-2K5 sees 25 kohm to the amplifier, and the differential pair presents 50 kohm. Across a 100 ohm shunt that is a 0.2 per cent gain loss, which is larger than the 0.05 per cent gain error row and has to be calibrated. Across a 10 kohm source the loss is 17 per cent and the whole measurement is a divider, which is the point at which a buffer belongs in front of the part rather than after it.

The network is ratio matched, so the loading is common to both inputs and cancels as long as the source impedances match. A protection resistor in one leg, a connector with different contact resistance, or a filter capacitor on one side breaks that match and converts common mode into a differential error. On a board the two input traces should be the same length, the same width and the same distance from any plane, which is ordinary practice for a differential pair and easy to forget on a DC channel.

Buying INA133UA-2K5

The A grade is the volume buy when the channel is inside a loop, and the U grade is the buy when the channel is a measurement. Both are active on the same 2500 piece reel, so the choice is a specification choice and does not affect the schedule. What does affect the schedule is the chip origin, which changes slew rate and noise without changing either grade.

On a reel that is opened and partly consumed, the level 3 floor life is the constraint. A production line that runs the same reel for weeks needs a dry cabinet and a record, or a level 2 row if one is published. Our incoming inspection plan page covers the receipt checks and the bake decision.

Questions that arrive with this part number

Whether the UA grade can replace the U is the first question, and the answer is yes where the offset budget has 450 µV of room and the gain error budget has 0.05 per cent. Whether the substitution is visible in a calibrated instrument is the second, and it is: the offset moves by up to 450 µV at the output, which on a 2 V full scale is 0.02 per cent and on a 100 mV signal is 0.45 per cent.

The third is the 5 V supply row. At plus or minus 5 V the offset window doubles to 1500 µV and the common mode range shrinks to plus or minus 7 V, so a part chosen from the 15 V table can look very different on a 10 V total supply. Both rows are in the same table and only one of them applies to the board in front of you.