Contact Us

INA129UA2K5

Brand: Texas Instruments
Texas Instruments INA129UA2K5 is a power management component designed for Industrial Automation and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

INA129UA2K5 — Power Management & Signal Chain | Superb Automation

INA129UA2K5

Texas Instruments — Power Management & Signal Chain

Product Overview

The INA129UA2K5 from Texas Instruments is a power management / signal chain IC delivering high efficiency, precision regulation, and robust protection. Texas Instruments (TI) is a global leader in analog ICs, power management solutions, and embedded processors.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-efficiency power conversion with low quiescent current
  • Wide input voltage range with precision output regulation
  • Integrated over-current, over-temperature, and short-circuit protection
  • Small footprint packaging for space-constrained designs
  • AEC-Q100 qualified options available for automotive applications
  • Flexible sequencing and soft-start control

Key Specifications

Input VoltageV
Output VoltageV
Output CurrentA
Switching FrequencykHz
Efficiency%
Quiescent CurrentµA
Topology—
Package—
Operating Temp°C
Protection—

Applications

Industrial Automation Automotive Electronics Telecom Infrastructure Server & Data Center Power Medical Devices Consumer Electronics

Request Quote — In Stock, 100% New & Original, Full Warranty

INA129UA2K5: the A grade on a 2500 piece reel, level 2 on this row and level 3 on its sibling

The INA129UA2K5 is the A grade of the eight pin SOIC on a 2500 piece large reel, and it is the row where the moisture level is most easily got wrong: the addendum prints INA129UA/2K5 at level 3 with 168 hours of floor life and INA129UA/2K5.B at level 2 with one year, so the suffix on the label decides whether an opened reel has to be baked after a week. Same silicon, same quantity, different handling.

The electrical rows are the UA bin: 1000 µV divided by gain maximum offset, 1 µV per degree divided by gain drift, 10 nA of bias current, 110 dB of rejection at a gain of 100 and the same 700 µA of supply current as the rest of the family. On a production build the reel is the normal buy and the tube is the exception, which is why this row rather than the tube row is the one that appears on most purchase orders.

The INA129UA2K5 rows as the addendum publishes them

Part classPrecision instrumentation amplifier, three op amp, current feedback input
Vendor statusActive, production
Data sheetSBOS051G, revised January 2026
Addendum rowINA129UA/2K5, 2500 pieces on a large reel
GradeA suffix
Gain equationG = 1 + 49.4 kΩ divided by RG
Input offset voltage1000 µV divided by gain maximum
Offset drift1 µV per degree divided by gain maximum
Input bias current10 nA maximum
Common mode rejection110 dB minimum at a gain of 100
Bandwidth1.3 MHz at unity gain, 200 kHz at a gain of 100
SettlingRead against gain; the family curve puts the 0.01 per cent point in the hundreds of microseconds at high gain
Supply rangePlus or minus 2.25 V to plus or minus 18 V
Quiescent current700 µA typical
BodySOIC, D outline, 8 pins
Carrier2500 pieces, 330 mm reel
Moisture levelLevel 3, 168 hour floor life on the plain row, level 2 with one year on the .B row
Temperature rangeMinus 40 to plus 125 degrees
Tube siblingINA129UA, 75 pieces per tube

Tubes, reels and two different moisture levels

The SOIC rows ship 75 pieces in a tube or 2500 pieces on a large reel, and the DIP rows ship 50 pieces in a tube. The carrier decides the handling, not the part: a 75 piece tube is a prototype or a small build, and a 2500 piece reel is a production run that will take months to consume. Between those two there is nothing on the addendum, which is why a build of 500 boards is usually bought as several tubes and hand fed rather than as a partial reel.

The moisture level differs between the carriers on this family. The tube rows are published at level 2 with a one year floor life, and the reel rows at level 3 with a 168 hour floor life, so the same die has a different shop floor rule depending on how it arrived. A level 3 reel that is opened for a partial build has to go back into dry storage or be baked, and a 2500 piece reel can easily sit open across two builds. Reading the level off the label rather than off the part number is the practical control, and INA129UA2K5 is the code to check it against.

Gain error rows, the A grade and the 0.024 per cent window

Gain error on this family is quoted per gain setting and per grade, and the tightest row is 0.024 per cent at a gain of 1 on the A grade parts. That figure is smaller than the tolerance of the resistor that sets the gain, so the resistor, not the amplifier, is what a calibration adjusts. At a gain of 100 the family rows widen and the A grade still holds a window about half as wide as the plain grade, which is the practical difference between the two bins on a channel that is calibrated once rather than per unit.

Nonlinearity is 0.001 per cent of full scale on the plain grade and 0.0005 per cent on the A grade, which is well below any converter this part is likely to drive. The number that limits a real channel is the gain drift, quoted in ppm per degree, because it cannot be trimmed at the bench and it moves with the cabinet temperature. On INA129UA2K5 the drift row is the one to put in a specification that has to hold over temperature, and the room temperature gain error row is the one to put in a production test limit.

Settling time against gain on a multiplexed front end

The settling time curve on this family is the one to read before a channel is put behind a multiplexer. At a gain of 100 the part settles to 0.01 per cent in a few microseconds, which allows a scan rate in the tens of kilohertz; at a gain of 1000 the same figure stretches out and the scan rate falls with it. The stage before the converter has to settle from the previous channel's value, not from zero, so the worst case is a full scale step between two adjacent channels, and that is the step the vendor curve uses.

The other half of the settling budget is the multiplexer and the filter between it and the amplifier. A 1 kΩ series resistor with a 100 nF capacitor has a 100 µs time constant, which dominates the amplifier completely and is the usual reason a scan runs slower than the data sheet suggests. On INA129UA2K5 the settling figure is only useful when the input network in front of it is faster than the amplifier, and a channel that ignores that rule will show an inter-channel error that moves with the source impedance.

Why the INA129 uses 49.4 kΩ and the INA128 uses 50 kΩ

The two parts in this document are the same silicon with one difference in the internal gain network: the INA128 uses 50 kΩ so that G = 1 + 50 kΩ divided by RG, and the INA129 uses 49.4 kΩ so that G = 1 + 49.4 kΩ divided by RG. The 49.4 kΩ is there so that a resistor value chosen for a competing part gives the same gain in the INA129, which is what makes it a drop-in replacement on an existing board without a resistor change. On a gain of 100 the difference between the two equations is 1.2 per cent, which is larger than the resistor tolerance and large enough to fail a calibrated channel.

Because of that, INA129UA2K5 must be bought as the part the board was drawn for, and the substitution question is not symmetrical. An INA129 in an INA128 socket runs 1.2 per cent low at a gain of 100 and 0.12 per cent low at a gain of 10, so it passes a functional test and fails a calibration. An INA128 in an INA129 socket runs high by the same amount. Neither failure is visible without a gain measurement, which is why the two codes should never be treated as interchangeable.

700 µA of quiescent current across a plus or minus 2.25 V to 18 V window

INA129UA2K5 draws 700 µA typical, which is four times the current of the micropower INA126 and a twentieth of what a fully featured instrumentation amplifier usually costs. The supply window of plus or minus 2.25 V to plus or minus 18 V covers a plus or minus 15 V industrial rack and a plus or minus 2.5 V single cell analogue front end in the same part number, and the common mode range tracks the rails rather than sitting at a fixed offset from ground.

The current is flat with load and nearly flat with temperature, so the supply budget can be set from the data sheet row rather than measured. What is not in the row is the reference divider and the load current. A plus or minus 15 V part driving a 10 kΩ load at 10 V adds a milliamp, which is more than the amplifier, and a single supply channel with an unbuffered mid rail divider can add a quarter of a milliamp. The amplifier is therefore rarely the largest item in the budget, and the budget is still small enough that a battery instrument can afford two channels.

8 nV per root hertz of voltage noise against 0.17 pA of current noise

The voltage noise row is 8 nV per root hertz at 1 kHz and the current noise is 0.17 pA per root hertz on the standard rows, which places the crossover source resistance at about 47 kΩ. Below that the voltage noise dominates and the amplifier is as quiet as the source; above it the current noise dominates and a FET input part would be quieter. On a 350 Ω bridge the voltage noise is the whole story and 8 nV per root hertz over a 10 Hz bandwidth is 25 nV, which against a 10 mV full scale is 2.5 parts per million.

The 0.1 to 10 Hz noise is quoted as 0.2 µV peak to peak, which is the figure that matters for a slow channel: a 10 mV full scale signal with 0.2 µV of low frequency noise has a resolution floor of 20 parts per million, better than most 16 bit converters can use. A channel that needs more resolution than that is limited by the sensor, and the amplifier stops being the item to change. On INA129UA2K5 the noise is flat enough that a higher gain does not improve the input referred figure below the crossover.

Buying INA129UA2K5

The reel decision is a volume decision and the grade decision is a specification decision, and they should be taken separately. A reel of 2500 UA parts on a product that builds a few hundred boards a year is years of stock, and while the part has no active shelf life limit the moisture level does: a level 3 reel that is opened and left has to be baked before use, and a level 2 reel gives a year instead of a week.

Where the reel is justified, the second source question follows. This is a three op amp part with a specific gain equation, and the parts that look similar use 50 kΩ rather than 49.4, which shifts the gain by 1.2 per cent at a gain of 100. Our amplifier cross reference page lists what we compare, and the pin to pin cross reference page covers the packages that fit the same footprint.

Questions that arrive with this part number

Whether the A grade can be replaced by the U bin in a shortage is the first question. The pin out, the gain and the noise are identical and the offset window halves, so the substitution is safe in the direction that improves the part and needs a check in the direction that widens it. The second question is the moisture level, and the answer is on the reel label rather than in the part number.

The third question is the gain equation against a competing part. The 49.4 kΩ term exists so that a resistor chosen for a 49.4 kΩ part gives the same gain here, and a board laid out for a 50 kΩ part will be 1.2 per cent low at a gain of 100. That is a calibration offset rather than a fault, and it should be caught on the first article rather than at system test.