Contact Us

DRV8872DDARQ1

Brand: Texas Instruments
Texas Instruments DRV8872DDARQ1 is a power management component designed for Industrial Automation and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

DRV8872DDARQ1 — Power Management & Signal Chain | Superb Automation

DRV8872DDARQ1

Texas Instruments — Power Management & Signal Chain

Product Overview

The DRV8872DDARQ1 from Texas Instruments is a power management / signal chain IC delivering high efficiency, precision regulation, and robust protection. Texas Instruments (TI) is a global leader in analog ICs, power management solutions, and embedded processors.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-efficiency power conversion with low quiescent current
  • Wide input voltage range with precision output regulation
  • Integrated over-current, over-temperature, and short-circuit protection
  • Small footprint packaging for space-constrained designs
  • AEC-Q100 qualified options available for automotive applications
  • Flexible sequencing and soft-start control

Key Specifications

Input VoltageV
Output VoltageV
Output CurrentA
Switching FrequencykHz
Efficiency%
Quiescent CurrentµA
Topology—
Package—
Operating Temp°C
Protection—

Applications

Industrial Automation Automotive Electronics Telecom Infrastructure Server & Data Center Power Medical Devices Consumer Electronics

Request Quote — In Stock, 100% New & Original, Full Warranty

DRV8872DDARQ1: the same H bridge under an automotive part number

The DRV8872DDARQ1 is the automotive qualified member of the DRV8872 family, published ACTIVE in the vendor addendum dated November 2025. The function is identical to the catalog part: one H bridge, 3.6 A peak, PWM control on two inputs, integrated current regulation through the ISEN pin, and a fault output. What changes is the qualification behind the row, and three numbers on the electrical table that a customer working to a specification will be asked about.

The first difference is the minimum operating voltage. The automotive document states 6.8 V where the catalog document states 6.5 V, so a 6.6 V rail that works with the catalog die is outside the published range for the qualified part. The second is the temperature grade: AEC-Q100 grade 1, which the vendor states as minus 40 to plus 125 degrees ambient, not junction. The third is the moisture level, level 3 at 260 degrees with a 168 hour floor life, which is a different production discipline from the level 2 catalog reel.

The DRV8872DDARQ1 rows as the addendum publishes them

Part classAutomotive brushed DC motor driver, one H bridge
Vendor statusACTIVE, production data
Data sheetSLVSCZ0C, catalog family document, with a separate automotive document
QualificationAEC-Q100, device temperature grade 1
Ambient rangeMinus 40 to plus 125 degrees
ESD, human bodyClassification level 2
ESD, charged deviceClassification C4B
Operating voltage6.8 V to 45 V, the automotive document figure
Catalog equivalent6.5 V to 45 V on the same die
Peak output current3.6 A
RDS(on), both FETs565 mΩ typical
Input thresholds0.5 V low, 1.5 V high, 0.5 V hysteresis
Current trip reference0.35 V typical on ISEN
PWM off time25 µs fixed
Overcurrent trip4.5 A typical, automatic retry
Thermal shutdown175 degrees nominal with 40 degrees hysteresis
BodyHSOP with PowerPAD, 8 pins, 4.90 by 6.00 millimetres
Reel rowDRV8872DDARQ1, 2500 pieces, large tape and reel, Active
Second rowDRV8872DDARQ1.B, 2500 pieces, same marking
Lead finishNickel palladium gold with an annealed variant
Marking8872Q on the eight pin body
Moisture levelLevel 3 at 260 degrees, 168 hours floor life
ApplicationsInfotainment, HUD projector adjustment, motorized shifter knobs, piezo horn

Note what the addendum does not contain: no tube row, no tray row, no smaller reel. The automotive part ships as 2500 pieces on a reel, exactly like the catalog part, so an engineering build at the qualified grade costs a full reel. The marking 8872Q is the only visible difference on the package, and it is the string a first article inspection should photograph.

What grade 1 at minus 40 to plus 125 actually covers

The figure is ambient, and the electrical limits in the document are stated at a junction temperature up to 150 degrees. On an eight pin body with 0.5 W of dissipation, the junction sits well above ambient, which means a 105 degree underhood ambient with 0.5 W leaves very little margin at the 150 degree limit. The practical consequence is that the qualified part does not remove the need to compute the junction temperature; it only moves the ambient window outward.

The 6.8 V minimum deserves attention in a crank event. A 12 V automotive rail dips during cold crank, and a load dump protector that clamps at 6.9 V leaves the automotive driver inside its range while the catalog part would already be below its 6.5 V floor. That 0.3 V difference is the whole reason the automotive document publishes a separate number, and it is the kind of detail that fails a document review when the wrong document is quoted.

Where the automotive row is used

The vendor lists the applications as infotainment, head up display projector adjustment, motorized shifter knobs and piezo horn drivers. All four are small mechanisms with short duty cycles, and all four sit inside a cabin where the ambient is bounded and the acoustic requirement is strict. Piezo horn drive is the odd one, because the load is capacitive rather than inductive and the current waveform is a short pulse, so the current regulation loop sees a spike and the 2 µs blanking window is what stops it from tripping on every edge.

For a body control module that drives four mechanisms, four of these parts take four times the reel quantity, and that is where the 2500 piece carrier starts to make sense. For a single seat positioner the reel is oversized, and a distributor's broken reel with a documented level 3 bake record is the practical route.

Production discipline for a level 3 reel

Level 3 means 168 hours of floor life at 30 degrees and 60 per cent relative humidity. A reel opened on Monday morning and consumed across a week of two shift production is inside the window; a reel opened and left on a shelf for a month is not, and it needs 24 hours of bake at 125 degrees before use. Because the pad is exposed and the body is small, popcorn damage from absorbed moisture shows up as a delaminated pad rather than a visible crack, and it usually appears after the board has passed functional test.

Two controls make this manageable. The first is a reflow profile that stays inside the vendor's 260 degree peak with the stated ramp, and the second is a floor life log taped to the reel. Our kitting service keeps the log with the reel and returns the balance in a moisture barrier bag with a fresh desiccant, which is the only way a partial reel can be reused in a qualified build.

Questions that arrive with this part number

The most common is whether the automotive string can be used in an industrial product. Electrically it can, because the die is the same and the range is wider, but the qualification paperwork and the price belong to the automotive programme, so an industrial customer usually pays for margin they do not need. The second is whether the catalog part can be substituted during a shortage. That substitution changes the qualified bill of materials and the minimum voltage, so it needs the customer's engineering approval rather than a purchasing decision.

The third is the fault behaviour under a shorted load. The overcurrent trip is between 3.7 and 6.4 A depending on temperature and process, with automatic retry after 3 ms, which means a permanent short produces a repeating retry rather than a latch. A system that needs a latched fault has to implement it in the controller by counting nFAULT transitions.

The switching frequency deserves a line of its own. The family accepts a PWM input from 0 to 100 kHz, and the automotive document does not narrow that range. At the low end the current ripple is set by the motor inductance and the 25 µs off time, and at the high end the rise and fall of the output stage start to dominate the duty cycle. A 20 kHz carrier keeps the audible noise above the band a cabin occupant notices, and it also keeps the switching loss low enough that the eight pin body does not need a heatsink. Above 40 kHz the loss in the gate drive becomes visible as a supply current that climbs with frequency, which is the first sign that the carrier has been set too high for the package. For a piezo horn or a small solenoid the load is capacitive, so the current spikes at each edge and the 2 µs blanking window is what stops the current loop from tripping on the edge rather than on the load. That is the one case in this family where a higher carrier makes the current waveform worse rather than better, and where a 10 kHz setting is the better choice even though the audible noise rises.

For a programme that is comparing the two grades, the pin to pin page lists the family rows side by side, and the date code page explains how we record the level 3 window when a reel is broken for a small build.