Contact Us

BQ25756ERRVR

Brand: Texas Instruments
Texas Instruments BQ25756ERRVR is a power management component designed for AI Servers & Low-Altitude Economy (Drone and UAV) and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

BQ25756ERRVR — Power Management & Signal Chain | Superb Automation

BQ25756ERRVR

Texas Instruments — Power Management & Signal Chain

Product Overview

The BQ25756ERRVR from Texas Instruments is a power management / signal chain IC delivering high efficiency, precision regulation, and robust protection. Texas Instruments (TI) is a global leader in analog ICs, power management solutions, and embedded processors.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-efficiency power conversion with low quiescent current
  • Wide input voltage range with precision output regulation
  • Integrated over-current, over-temperature, and short-circuit protection
  • Small footprint packaging for space-constrained designs
  • AEC-Q100 qualified options available for automotive applications
  • Flexible sequencing and soft-start control

Key Specifications

Input VoltageV
Output VoltageV
Output CurrentA
Switching FrequencykHz
Efficiency%
Quiescent CurrentµA
Topology—
Package—
Operating Temp°C
Protection—

Applications

Industrial Automation Automotive Electronics Telecom Infrastructure Server & Data Center Power Medical Devices Consumer Electronics

Request Quote — In Stock, 100% New & Original, Full Warranty

BQ25756E: a bidirectional buck boost controller for one to seven cells

The BQ25756ERRVR is a charge controller rather than a charger. The FETs are external, the switching topology is buck boost rather than buck, and the input can be either above or below the pack voltage. The input window is 4.2 V to 36 V, the pack can go to 36 V, and the supported profiles run from one to seven Li-ion cells or one to nine LiFePO4 cells.

The bidirectional part is what makes it interesting. In one direction the part charges the pack from an adapter, a solar panel or a USB PD source. In the other it takes power from the pack and regulates the input terminal, with a current limit, to feed a load or to present a source to a host. That is the topology of a power station, a cordless tool platform with a USB output, or a robot that has to run from its own pack and charge it from the same terminals.

Automatic maximum power point tracking is included for solar input. The controller sweeps the input operating point and holds the panel at its peak rather than letting the panel voltage collapse as the charge current rises.

Key data for the BQ25756ERRVR

FunctionBidirectional buck boost charge controller, external NFETs
Input range4.2 V to 36 V operating
Battery rangeUp to 36 V, one to seven Li-ion cells, one to nine LiFePO4 cells
Switching frequency200 kHz to 600 kHz adjustable, with optional external clock sync
MPPTAutomatic maximum power point tracking for solar input
Reverse modeRegulates the input terminal from the pack, with a constant current limit
CompensationIntegrated loop compensation and soft start
Gate driveOptional separate gate driver supply input for efficiency
ControlStand alone or I2C, with charge status indication
PackageVQFN, 36 pins, RRV body
TemperatureMinus 40 to 125 C operating

Body and ordering data

This page is the 36 V member of a pair. The BQ25756 in the same document reaches 70 V and fourteen cells. Both are in the RRV body with 36 pins, both are active and in production on 3000 piece reels, and both carry the same 125 C rating. The part marking differs by one letter, so the reel label is the only reliable separator in a mixed store.

BQ25756ERRVR carries NIPDAU or SN finish depending on the row, moisture level 1 at 260 C with no floor life limit, minus 40 to 125 C. The 125 C figure is the reason this family is used in tools and outdoor equipment rather than only in consumer devices.

Four FETs, and the ones that carry the current in each direction

A four switch buck boost has two FETs on the input side and two on the output side, and which pair switches depends on whether the input is above or below the pack. In a wide input product the operating point crosses the boundary during a single charge, because a 24 V source charging a 6 cell pack at 25 V is right at the crossover. The controller has to hand over between the two modes without a glitch on the inductor current, and the transition region is where most of the observable problems live.

The separate gate driver supply pin exists for that reason: driving the FETs from a rail above the input keeps the on resistance low when the input sits near the output, which is exactly the crossover condition. Leaving that pin tied to the input is legal and costs efficiency at the boundary.

Where it fits in a build

Cordless power tools, garden tools, robotic mowers, portable power stations, cordless vacuums and solar chargers. The bidirectional function adds a USB PD output to a tool battery platform without a second converter. The power management cross reference page lists the controllers we compare on cell count and input window.

A 2 cell handheld does not need a buck boost, because the adapter voltage is always above the pack. The topology earns its cost when the input can be below the pack, as it is on a solar panel or a partially discharged source.

The sourcing side of this part is covered on the how to reduce component cost. For a power stage built around four external FETs, that page covers where the money actually sits and which substitutions are worth the qualification.

Questions we get on this code

Can it charge a 7 cell pack from 20 V? Yes, that is the point of the buck boost. A buck only controller would be blocked because the input is below the pack.

Does reverse mode need extra parts? It uses the same four FETs. What changes is the control loop and the fact that the input terminal becomes the regulated output.

Is the MPPT automatic? It runs without host intervention. The tracking parameters can be changed over I2C if the panel is known.

Why 200 kHz to 600 kHz? The low end favours efficiency and the high end favours inductor size. A tool pack that has room for a larger inductor runs at the low end.