Contact Us

Enclosure Document Pockets and Door Pockets

Document pockets in A3 landscape, A4 portrait and A5 landscape, self adhesive on the door. Wiring plan pockets with a variable width, screwed to the door strip of a 400 to 800 mm door. Depth from 17 to 45 mm, so a wiring diagram and a test sheet fit together. Clear front, so the drawing is read without opening the cabinet.
quote now

Product Specifications

Product Overview

A document pocket is the answer to a simple problem: the wiring diagram for a cabinet is printed once, and by the second year it is folded into a drawer somewhere in the workshop. A pocket on the inside of the door keeps the drawing with the panel, and a clear front means the drawing can be read with the door closed.

Two types cover cabinet work. The self adhesive pocket is a moulded tray with a clear front and a strip of adhesive on the back; it goes on a flat door skin and needs no holes. The variable width pocket is screwed to the perforated door strip, and its width is set by the door width, so a 600 mm door takes a 475 mm pocket and an 800 mm door takes 625 mm.

Depth is the figure that is usually ignored. A 17 mm pocket holds a folded A4 sheet; a 45 mm pocket holds a bound manual or a set of drawings with a test certificate behind them. On a door with a shallow return, the 45 mm pocket can foul the door frame, so the depth and the door swing have to be checked together.

Key Specifications

TypeSizesExternal sizeDepthFixing
Document pocket, self adhesiveA3 landscape286 x 438 mm45 mmadhesive strip on the door
Document pocket, self adhesiveA4 portrait254 x 228 mm17 mmadhesive strip on the door
Document pocket, self adhesiveA5 landscape174 x 228 mm17 mmadhesive strip on the door
Wiring plan pocket, variable width400 to 500 mm door210 x 325 mm35 mmscrewed to door strip
Wiring plan pocket, variable width600 mm door210 x 475 mm35 mmscrewed to door strip
Wiring plan pocket, variable width760 to 800 mm door210 x 625 mm35 mmscrewed to door strip

Included Models and Order Codes

The A sizes are fixed pockets with an adhesive back, and the four digit codes below are the ones that are quoted most often. The variable width pockets are ordered by door width, not by paper size, because the pocket is cut to the door strip and the drawing is folded to fit.

Part numberTypePaper sizeExternal sizeDepth
2513.000self adhesiveA3 landscape286 x 438 mm45 mm
2514.000self adhesiveA4 portrait254 x 228 mm17 mm
2515.000self adhesiveA5 landscape174 x 228 mm17 mm
2515.200screwed, variable widthfits 400 to 500 mm door210 x 325 mm35 mm
2515.300screwed, variable widthfits 600 mm door210 x 475 mm35 mm
2515.400screwed, variable widthfits 760 to 800 mm door210 x 625 mm35 mm

What Fits in Which Pocket

The paper size is only half of the decision. The table below is the usual content per pocket, taken from what is actually put in a cabinet during commissioning.

ContentPocketNote
Single A4 wiring diagram, folded2514.000adhesive, no holes in the door
A3 drawing, unfolded2513.00045 mm depth, clear front
Test sheet plus a small parts bag2515.000A5, shallow, on the door skin
Wiring plan on a 400 mm door2515.200screwed to the door strip
Wiring plan on a 600 mm door2515.300475 mm wide pocket
Manual and certificate on an 800 mm door2515.400625 mm wide pocket

Key Features

Clear front – the drawing is read with the door closed, which is how a maintenance check is actually done.

Adhesive or screwed – a flat door skin takes the adhesive pocket with no holes; a door strip takes the screwed type.

Width follows the door – the variable width pocket is ordered by door width, so it spans the strip instead of leaving a gap at each end.

Three depths – 17, 35 and 45 mm, for a folded sheet, a wiring plan or a bound manual.

A3 to A5 – the paper size is chosen from the drawing, not from the pocket that happens to be in stock.

Fits with the door hardware – the pocket sits inside the door frame and clears the stay and the lock rod on a standard cabinet.

Applications

A pocket is fitted where the drawing is needed, which is almost always the inside of the door. Three cases.

Control cabinets on a plant floor – a wiring plan pocket on the door, so the electrician reads the drawing without taking it back to the office.

Test and inspection stations – an A4 pocket with the test sheet and the calibration date, changed without opening the cabinet.

Export cabinets – a pocket with the manual and the certificate, so the documents travel with the panel and arrive at the site.

Power supplies, pockets and cabinet hardware are quoted for the same panel, and both the SUPERB PCBA and the SUPERB PCB are checked against the load list so the 24 V rail is sized for the relays, the lamps and the sensors that are actually fitted.

Sourcing and Cross-Reference

Measure the door strip, not the door. A 600 mm door has a usable strip that is narrower than the door, and the pocket width is set by the strip. A pocket that is 20 mm too wide will not sit flat.

Check the swing before the depth. A 45 mm pocket on a door that opens flat against a wall leaves a mark on the wall and can crack the front. On a shallow return, the 17 mm pocket is the one that fits.

Decide adhesive or screwed from the paint. Adhesive on a textured powder coat holds less well than on a flat finish; on a textured door the screwed type is the safer choice. See lead time and availability when the pockets ship with the cabinets.

Do not put the pocket where the door stay lands. The stay folds into the top corner of the door, and a pocket fitted across that corner is the most common rework on a door.

The SUPERB Assembly team derates the supply for the cabinet temperature before the rail is wired, because a 24 V unit rated at 5 A in free air delivers less inside a closed cabinet at 55 C.

Q: Can the pocket be supplied for a door width that is not in the standard list?

A: Yes. Send the 24 V load list with the inrush of the relays and the ambient inside the cabinet; the SUPERB Tech team quotes a supply with the headroom and the redundancy module that the load needs.

Why Builders Buy Document Pockets From SUPERB

  1. Pocket ordered by door width: the variable width type is quoted against the door strip, so the drawing holder spans the door and sits flat.
  2. Sizes and depths in one table: paper size, external size and depth are given per code, so the fit on a shallow door can be checked before the order.
  3. Adhesive and screwed options: the fixing follows the door finish instead of the other way round.
  4. Quoted with the cabinet hardware: the pocket is checked against the stay, the lock rod and the hinge side so it does not clash.

Related Product Families

This page is part of the component range we supply for industrial, telecom, medical and defence builds. Continue with: Nameplates and Engraved Panel Labels, Tamper Evident Seals and Security Labels, Enclosure LED Lamps and Door Switches, Viewing Windows and Display Bezels.