Board-to-Board and FPC Connectors for Compact Assemblies
Product Specifications
Product Overview
A board-to-board pair is the mechanical joint between two printed circuits, and it is usually the last part of a product that can be changed. Once the enclosure, the standoff height and the antenna clearance are fixed, the connector must sit inside that space with a mated height that the maker publishes, not a height that the drawing suggests. That is why the mated height and the height above board are quoted separately for every part on this page.
Pitch decides how many signals fit across a given edge. Hirose DF40 runs at 0.4 mm pitch with mated heights from 1.5 mm to 4.0 mm and is rated for 20 Gbps lanes, which is the class used for camera modules, USB4 links and board-to-board PCIe risers. The DF12 series runs at 0.5 mm pitch, covers 3.0 mm to 5.0 mm mated height and is rated for 5 Gbps, which covers most instrument and industrial stacks. Between 0.4 mm and 0.5 mm the difference is not only density: 0.4 mm needs a tighter paste stencil and a flatter board.
FPC and FFC receptacles are chosen on three numbers. The first is the cable thickness, and 0.3 mm is the value the Omron XF2M and XF3M parts accept. The second is the contact arrangement, and a dual sided contact part removes the need to track which side of the flex carries the pads. The third is the actuator, and a backlock type gives an audible click and holds the cable when the assembly is potted or potted-free but vibration loaded.
Wire-to-board headers are still the cheapest way to bring power and a few signals off a board. JST PH runs at 2.0 mm pitch with a 2 A rating on AWG 24 and a 100 V rating, and JST SH runs at 1.0 mm pitch with 1 A and 50 V, which suits battery, fan and sensor harnesses. Both are crimp style, so the harness is made separately and the board only carries the header.
The failures we see on incoming inspection are mechanical, not electrical. A 0.4 mm plug that has been placed with too much nozzle force bends a contact row and still passes a continuity test; a 0.5 mm FPC receptacle whose actuator is closed before the cable is seated reads open on two or three lines only when the board is warmed. Both are caught by a first article check of mated height and insertion force, not by an electrical test alone.
Key Specifications
| Parameter | Value | Applies to |
|---|---|---|
| Contact pitch | 0.4 mm / 0.5 mm / 1.0 mm / 2.0 mm | DF40, DF12, SH, PH |
| Mated height | 1.5 mm to 4.0 mm in 0.5 mm steps | DF40 series |
| Mated height | 3.0 mm, 3.5 mm, 4.0 mm, 5.0 mm | DF12 series |
| Height above board | 2.00 mm to 2.10 mm | XF3M, XF2M |
| FPC and FFC thickness | 0.3 mm | XF2M, XF3M |
| Rated current per contact | 0.5 A / 1 A / 2 A | XF2M and XF3M / SH / PH |
| Rated voltage | 50 V AC/DC, 100 V AC/DC | XF2M, XF3M, SH / PH |
| Contact resistance | 50 mOhm max | XF2M, XF3M |
| Insulation resistance | 100 MOhm min at 250 V DC | XF2M, XF3M |
| Insertion durability | 20 cycles gold plated | XF2M, XF3M |
| Operating temperature | -30 to 85 C, -25 to 85 C, -40 to 105 C | XF2M and XF3M / SH / PH |
| Signal support | 20 Gbps lane, 5 Gbps lane | DF40 / DF12 |
Included Models and Order Codes
The list below covers the four families we hold and source most often for compact assemblies. Positions and heights are taken from the maker data sheet for each order code, and a dash means the maker does not publish that figure for the part, not that it is zero. For mezzanine pairs, order the plug and the receptacle together, because the mated height is a property of the pair.
| Part Number | Function | Pitch | Positions | Mated height or height above board | Mounting | Rated current |
|---|---|---|---|---|---|---|
| DF40C-20DP-0.4V(51) | Board-to-board plug | 0.4 mm | 20 | 1.5 mm mated | SMT | – |
| DF40C-30DP-0.4V(51) | Board-to-board plug | 0.4 mm | 30 | 1.5 mm mated | SMT | – |
| DF40C-40DP-0.4V(51) | Board-to-board plug | 0.4 mm | 40 | 1.5 mm mated | SMT | – |
| DF12(3.0)-20DP-0.5V(86) | Board-to-board plug | 0.5 mm | 20 | 3.0 mm mated, 2.30 mm above board | SMT | – |
| DF12(3.0)-30DP-0.5V(86) | Board-to-board plug | 0.5 mm | 30 | 3.0 mm mated | SMT | – |
| XF2M-2015-1A | FPC and FFC receptacle, dual sided contact | 0.5 mm | 20 | 2.10 mm above board | SMT right angle | 0.5 A |
| XF3M-2415-1B | FPC and FFC receptacle, dual sided contact | 0.5 mm | 24 | 2.00 mm above board | SMT right angle | 0.5 A |
| B2B-PH-K-S | Wire-to-board header, top entry | 2.0 mm | 2 | 8 mm mounting height | Through hole | 2 A |
| BM02B-SRSS-TB | Wire-to-board header, side entry, SH series | 1.0 mm | 2 | 2.95 mm mounting height | SMT | 1 A |
Key Features
0.4 mm pitch for dense edges – DF40 pairs carry 20 to 40 contacts per row set inside 1.5 mm mated height, which frees board area for the antenna keep out on the same edge.
Stack height as a family property – DF40 and DF12 publish every mated height in the range, so a 1.5 mm stack on the prototype can become a 3.0 mm stack in the product without changing the footprint family.
Dual sided FPC contact – The XF2M and XF3M accept the flex either way up, so the cable does not need a keyed side and rework at the bench does not need the flex reversed.
Rotary backlock actuator – A backlock closes with a click and holds a 0.3 mm cable in place, which matters when the flex is folded during final assembly.
Crimp harness families – PH at 2.0 mm and SH at 1.0 mm keep the board side small and move the wire termination to a separate harness step with a known pull force.
Paste and placement compatible – All parts on this page are tape and reel with a pick up area, so they run on a standard line without a custom nozzle.
Applications
These connectors appear wherever two boards or one board and one flex meet inside a small housing.
Camera and sensor modules – A 0.4 mm DF40 pair puts a camera board behind a lens barrel with 1.5 mm of stack, and the 20 Gbps lane rating leaves room for a MIPI run without a redriver.
Handheld instruments – A 0.5 mm DF12 stack at 3.0 mm separates a display board from a main board while keeping the enclosure under 20 mm thick.
Control panels and keypads – An XF3M receptacle takes a 24 way flex from a membrane keypad, and the backlock holds it through vibration on a panel mounted unit.
Connectors are one line item on a build where the SUPERB PCB and the SUPERB PCBA teams work from the same BOM, so a shortage on one position count is visible to both before the reels are ordered.
Sourcing and Cross-Reference
Connector shortages usually hit one position count, not the whole family. A 20 pin DF40 pair that is quoted at 26 weeks can often be replaced by a 24 or 30 pin part on the same 0.4 mm footprint with the outer contacts left unconnected, and the mechanical fit does not change because the mated height comes from the family, not the count.
When a family is being discontinued, the replacement is chosen on the pair, not on the plug. The two things to match are the mated height and the contact wipe length, and the second is the one that decides whether an existing housing still closes. We ask for the current part number, the mated height and the number of mates per unit before quoting an alternative.
For flex assemblies, we can quote the receptacle and the flex together as one item, which removes the risk of a 0.3 mm cable being ordered against a 0.2 mm receptacle. Send the pad pitch, the stiffener thickness and the bend radius, and the flex is built to that stack.
Where the flex and the board are built as one unit, SUPERB Assembly mounts the receptacle, seats the tail and inspects the lock before the unit is packed.
Q: Can you cross a discontinued 0.5 mm FPC receptacle to a part that fits the same footprint?
A: Position count, plating and packaging decide the answer; the SUPERB Tech sourcing desk checks maker stock and replies with the counts that can ship this week.
Why Buy Connectors Through SUPERB
- One BOM, one shipment: Connectors, passives and the assembled board can ship together, which removes a separate broker line and a second incoming inspection.
- Assembly feedback in the quote: Because the same team sees the part at placement and at inspection, a stencil or nozzle problem is flagged before the order is released.
- Position count flexibility: We quote the exact count and note the same family in other counts, so a shortage on one variant does not stop the build.
- Matched flex and receptacle: Flex assemblies are quoted with the receptacle that accepts their thickness, so the pair arrives compatible.
- Documented provenance: Every shipment carries the maker data sheet revision and the date code, which is what an incoming inspection needs.
Related Product Families
This page is part of the component range we supply for industrial, telecom, medical and defence builds. Continue with: Common Mode Chokes and Power Inductors, TVS and ESD Protection Diodes, USB Hubs and Port Controllers, OLED and Character LCD Display Modules.