Contact Us

STM8S105S6T6C

Brand: ST
ST STM8S105S6T6C is a mcu & embedded component designed for general electronics and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

STM8S105S6T6C — MCU & Embedded Processors | Superb Automation

STM8S105S6T6C

ST — MCU & Embedded Processors

Product Overview

The STM8S105S6T6C from ST is a microcontroller / embedded processor engineered for real-time control, signal processing, and connectivity. STMicroelectronics is a European semiconductor leader with a strong portfolio in MCUs, power management, sensors, and analog ICs.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • ARM Cortex / RISC-V / proprietary core with high-performance real-time processing
  • Integrated flash memory and SRAM for efficient code execution
  • Rich peripheral set: UART, SPI, I2C, ADC, timers, PWM
  • Low-power modes for battery-operated and energy-sensitive applications
  • Hardware security features: secure boot, crypto accelerator, TRNG
  • Extensive development ecosystem with IDE, HAL, and RTOS support

Key Specifications

Core—
Max FrequencyMHz
FlashKB
SRAMKB
GPIO—
ADCbits
Interfaces—
Supply VoltageV
Operating Temp°C
Package—

Applications

Industrial Motor Control IoT Edge Nodes Consumer Electronics Automotive Body Control Smart Home & Appliances Medical Portable Devices

Request Quote — In Stock, 100% New & Original, Full Warranty

STM8S105S6T6C: 32 Kbyte 5 V STM8S access line MCU in LQFP44

STM8S105S6T6C is the 32 Kbyte member of the STM8S105 access line in a LQFP44 body (10 by 10 mm), with 1 Kbyte of true data EEPROM, 2 Kbytes of RAM, 34 general purpose I/O, 31 external interrupt inputs, 8 capture compare channels, 15 high sink outputs and 9 analog inputs. The supply range is 2.95 to 5.5 V, the core runs at up to 16 MHz with zero wait state Flash access, and the converter is 10 bit with its own reference pins.

Order code and memory

Order codeSTM8S105S6T6C
Program Flash32 Kbytes
Data EEPROM1 Kbyte, 300 kcycle endurance
RAM2 Kbytes
PackageLQFP44, 10 by 10 mm
Pin count44
Maximum general purpose I/O34
External interrupt pins31
Timer capture compare channels8
ADC channels9 of the 10 channel converter
High sink outputs15
Temperature gradesuffix 6, minus 40 to plus 85 C

Electrical and peripheral parameters

Supply voltage2.95 to 5.5 V
Maximum CPU clock16 MHz with zero wait state Flash access
Run current7.7 mA typical at 16 MHz from Flash on 5 V, 3.2 mA with the loop in RAM
Halt current6.5 uA typical at 5 V, 25 uA maximum at 85 C and 80 uA at 125 C
Active haltwait, active halt and halt modes, with the auto wakeup unit
Low power modesperipheral clocks can be switched off one by one
Wake up time7 microseconds from halt
Analog to digital converter10 bit, 9 channels, VREF+ and VREF- pins, 14 clock cycles per conversion
Digital to analog converternot present
Comparatorsnot present on this line
Timersone 16 bit advanced control timer with four capture compare channels and three complementary outputs, two 16 bit general purpose timers with five channels between them, one 8 bit basic timer, auto wakeup timer, window and independent watchdog
Serial interfacesUART with LIN master, SmartCard and IrDA, SPI up to 8 Mbit/s, I2C up to 400 kHz
DMAnot present on this line
Data EEPROM endurance300 kcycle for the 1 Kbyte true data EEPROM
Program memory endurance10 kcycle, 20 years retention at 55 C
Identification96 bit unique ID, single wire interface module, option byte read out protection

Points to check before this part goes on a BOM

This is the 32 Kbyte 44 pin part with the full ordering string, and it is the version most often quoted by distributors because the trailing C appears on the current marking. Electrically it is the same device as the S6T6: 34 port pins, 31 external interrupt inputs, nine converter channels, 15 high sink outputs, 2 Kbytes of RAM and 1 Kbyte of EEPROM, from a 2.95 to 5.5 V supply at up to 16 MHz.

For incoming inspection the useful checks are the ones that catch a mismatched reel rather than a bad die. The 96 bit unique ID can be read through the single wire interface and compared against the expected batch, the option byte can be verified for the read out protection state, and the internal 16 MHz RC can be trimmed and measured to confirm the part is within the 1 percent band at room temperature. Those three checks take a few seconds per device and settle most authenticity questions.

On the application side the part is a workhorse: a three phase bridge on the advanced timer, an encoder on the general purpose timers, a host link on the UART with LIN master support, a sensor bus on the I2C at 400 kHz and a display or memory on the SPI at up to 8 Mbit/s. The 10 by 10 mm body gives the copper area that 15 high sink outputs need when they drive LEDs continuously, which is why panel products tend to use the 44 pin body rather than the 48 pin one.

Where this order code fits

Panel and machine controllers in series production, encoder interfaces, LED and relay driver boards and repair demand for equipment built on the 44 pin access line part. Teams comparing it against a neighbouring memory size or pin count start from our MCU Cross Reference page, and teams replacing a line that has gone end of life start from the Incoming Inspection Plan page. Both list the figures that have to match before a substitute goes on a BOM.

Questions buyers ask

What do I check on incoming parts? The 96 bit unique ID, the read out protection state in the option byte, and the trimmed 16 MHz RC frequency. Together they catch a wrong reel or a remarked device without a full functional test.

What is the EEPROM endurance? 300 kcycles for the 1 Kbyte data array with 20 years retention at 55 C for the program array after 10 kcycles. The two arrays have separate limits.

Does the part support LIN? Yes, the UART has LIN master mode plus SmartCard and IrDA support, and the SPI reaches 8 Mbit/s for an external transceiver or memory.

SUPERB holds and sources ST microcontroller lines including this order code for production and repair demand, quoted against the exact ordering string with date codes and packing stated. When a line is changing, the Supplier Quality Audit page sets out the checks that keep a substitute from failing on the bench.