Contact Us

STM8L151C6T6

Brand: ST
ST STM8L151C6T6 is a mcu & embedded component designed for general electronics and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

STM8L151C6T6 — MCU & Embedded Processors | Superb Automation

STM8L151C6T6

ST — MCU & Embedded Processors

Product Overview

The STM8L151C6T6 from ST is a microcontroller / embedded processor engineered for real-time control, signal processing, and connectivity. STMicroelectronics is a European semiconductor leader with a strong portfolio in MCUs, power management, sensors, and analog ICs.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • ARM Cortex / RISC-V / proprietary core with high-performance real-time processing
  • Integrated flash memory and SRAM for efficient code execution
  • Rich peripheral set: UART, SPI, I2C, ADC, timers, PWM
  • Low-power modes for battery-operated and energy-sensitive applications
  • Hardware security features: secure boot, crypto accelerator, TRNG
  • Extensive development ecosystem with IDE, HAL, and RTOS support

Key Specifications

Core—
Max FrequencyMHz
FlashKB
SRAMKB
GPIO—
ADCbits
Interfaces—
Supply VoltageV
Operating Temp°C
Package—

Applications

Industrial Motor Control IoT Edge Nodes Consumer Electronics Automotive Body Control Smart Home & Appliances Medical Portable Devices

Request Quote — In Stock, 100% New & Original, Full Warranty

STM8L151C6T6: 32 Kbyte ultra-low-power STM8L MCU in LQFP48

STM8L151C6T6 is a 32 Kbyte Flash member of the STM8L ultra-low-power line in a LQFP48 body (7 by 7 mm), with 2 Kbytes of RAM, 1 Kbyte of data EEPROM, 41 general purpose I/O, 25 channels on the 12 bit converter and 1 channel of 12 bit DAC. The supply range is 1.8 to 3.6 V, down to 1.65 V at power down and the core runs at up to 16 MHz. This order code has no LCD controller, so every port pin belongs to the application.

Order code and memory

Order codeSTM8L151C6T6
Program Flash32 Kbytes
Data EEPROM1 Kbyte with ECC and read while write
RAM2 Kbytes
PackageLQFP48, 7 by 7 mm
Pin count48
Maximum general purpose I/O41
ADC channels25 of the 12 bit converter
DAC channels1 of 12 bits with output buffer
LCD controllernot present on this order code
Temperature gradesuffix 6, minus 40 to plus 85 C

Electrical and peripheral parameters

Supply voltage1.8 to 3.6 V, down to 1.65 V at power down
Maximum CPU clock16 MHz, 16 MIPS peak
Run current195 uA per MHz plus 440 uA static
Halt current350 nA typical
Active halt1.3 uA typical with the real time clock running
Low power modes5.1 uA typical in low power run, 3 uA in low power wait
Wake up time4.7 microseconds from halt
Analog to digital converter12 bit, up to 1 Msps, 25 channels, internal reference voltage and temperature sensor on chip
Digital to analog converter1 channel of 12 bits with output buffer, 7 microseconds typical settling into 5 k and 50 pF
Comparators2, one fixed threshold and one rail to rail, both can wake the core
Timerstwo 16 bit general purpose timers with two channels each, one 16 bit advanced control timer with three channels, one 8 bit timer, beeper timer, window and independent watchdog
Serial interfacesone SPI, one I2C at 400 kHz with SMBus and PMBus, one USART with ISO 7816 and IrDA
DMA4 channels covering the ADC, the DAC, SPI, I2C, USART and the timers
Data EEPROM endurance300 kcycle with ECC and read while write
Program memory endurance10 kcycle, 30 years retention at 85 C
Identification96 bit unique ID, single wire interface module, USART bootloader

Points to check before this part goes on a BOM

Thirty two Kbytes of Flash, 2 Kbytes of RAM and 1 Kbyte of EEPROM in a 7 by 7 mm body is the middle of the STM8L medium density range, and it is the order code most often asked for when a board has to keep the pinout of an existing 48 pin board. The L151 line has no LCD controller, so all 41 port pins are available as I/O and 25 of them reach the converter, which is the practical difference against the L152C6 that shares the same package and price band but reserves pins for the glass.

Current in run mode is quoted as 195 uA per MHz plus 440 uA static, so at 16 MHz the core draws roughly 3.6 mA, and low power run drops that by more than two orders of magnitude when the application only needs to poll a bus. The low power modes are the point of this family: 5.1 uA in low power run, 3 uA in low power wait, 1.3 uA in active halt with the real time clock alive, and 350 nA in halt. A logger that samples a thermistor every ten seconds lives comfortably on the last two figures.

Two things are worth checking on a 48 pin board before the BOM is frozen. First, the 12 bit converter and the 12 bit DAC both use VREF+, and the DAC output buffer needs that reference to be stable while the buffer drives a load, so a reference taken from a switching rail will show up as code noise on the DAC. Second, the serial set is one USART, one SPI and one I2C, narrower than the 64 Kbyte members of the same family which carry three USARTs and two SPI blocks. A board that needs two buses at once has to move up in memory size, not just in package.

Where this order code fits

Portable medical monitors, wireless sensor nodes, smart meters and handheld test tools where the run budget is measured in microamps and the analog front end needs a true 12 bit converter with an external reference. Teams comparing it against a neighbouring memory size or pin count start from our MCU Cross Reference page, and teams replacing a line that has gone end of life start from the Obsolete Part Cross Reference Hub page. Both list the figures that have to match before a substitute goes on a BOM.

Questions buyers ask

What changes between the L151C6 and the L152C6? The L152C6 adds a segment LCD controller with a step up converter and gives up nothing else; both are 32 Kbyte parts with 2 Kbytes of RAM in the same 48 pin body. If the product has no glass, the L151C6 keeps every pin available as I/O.

How fast is a conversion? The converter reaches 1 Msps on its fast channel and runs from the internal 16 MHz RC or an external clock. At 3 V the reference can be as low as 1.8 V, and the accuracy tables are given separately for 1.8 to 2.4 V and for 2.4 to 3.6 V, so the rail decides which error budget applies.

Is the part still in production? Yes. DS6372 Rev 17 dated March 2021 carries the full production data banner. Orders are quoted against the exact ordering string STM8L151C6T6, including the temperature suffix.

SUPERB holds and sources ST microcontroller lines including this order code for production and repair demand, quoted against the exact ordering string with date codes and packing stated. When a line is changing, the Incoming Inspection Plan page sets out the checks that keep a substitute from failing on the bench.