STM32WB55REV6
Product Specifications
STM32WB55REV6 — ARM Cortex-M4F + M0+ Microcontroller by STMicroelectronics
The STM32WB55REV6 is an STMicroelectronics ARM Cortex-M4F + M0+ MCU in VFQFPN-68(8x8) for Embedded control and general-purpose MCU applications. Supplied by SUPERB Automation.
Part Number Decoded — Field by Field
| Field | Value | Meaning |
|---|---|---|
| STM32WB55REV6 | Full Part Number | STMicroelectronics ARM Cortex-M4F + M0+ Microcontroller |
| STM32 | Product Family | STMicroelectronics 32-bit ARM-based MCU |
| WB | Series | ARM Cortex-M4F + M0+ based MCU — WB series |
Quick Specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Part Number | STM32WB55REV6 |
| Core | ARM Cortex-M4F + M0+ |
| Package | VFQFPN-68(8x8) |
| Temperature Range | −40°C to +85°C |
| Supply Voltage | 1.8V–3.6V |
Product Overview
The STM32WB55REV6 is an STMicroelectronics ARM Cortex-M4F + M0+ microcontroller in VFQFPN-68(8x8) package. Part of ST's extensive STM32 portfolio, it delivers a high-performance processing platform with integrated Flash, SRAM, and a rich set of communication peripherals for Embedded control and general-purpose MCU applications. Supplied by SUPERB Automation with full traceability and competitive lead times.
Key Features & Benefits
ARM Cortex-M4F + M0+ Core — Efficient Processing for Embedded Control
The ARM Cortex-M4F + M0+ core provides deterministic real-time performance with hardware multiply/divide and optional FPU, executing control loops, communication stacks, and sensor fusion algorithms efficiently in resource-constrained embedded environments.
Rich Peripheral Set — GPIO, Timers, ADC, Communication Interfaces
Features a comprehensive set of on-chip peripherals including multi-channel DMA, 12/16-bit ADCs, advanced PWM timers for motor control, and multiple USART/SPI/I²C interfaces for sensor and communication module connectivity.
ST Ecosystem — CubeMX, HAL, LL, Middleware
Fully supported by ST's STM32Cube ecosystem including CubeMX graphical configuration, HAL/LL driver libraries, FreeRTOS integration, and extensive middleware stacks (USB, TCP/IP, FATFS, graphics) — accelerating firmware development and reducing time-to-market.
Target Applications
Embedded Control & IoT Systems
Functions as the main processing unit in embedded control systems, IoT endpoints, sensor hubs, motor controllers, and human-machine interfaces — leveraging the Cortex-M architecture for efficient, low-power operation.
Industrial Automation & Motor Control
Powers industrial motor drives, PLCs, sensor transmitters, and factory automation equipment — taking advantage of advanced PWM timers, high-speed ADCs, and CAN/RS-485 communication for distributed control architectures.
Consumer & Portable Electronics
Integrates into consumer devices, wearables, smart home products, and portable instruments — benefiting from the STM32 family's low-power modes, small packages, and extensive third-party firmware ecosystem.
Frequently Asked Questions
Is the STM32WB55REV6 supported by STM32CubeIDE?
Yes, the STM32WB55REV6 is fully supported in STM32CubeIDE with graphical pinout configuration, clock tree setup, and automatic peripheral initialization code generation — enabling rapid prototyping and production firmware development.
What firmware/RTOS options are available?
The STM32 family is supported by FreeRTOS, Zephyr, NuttX, ChibiOS, and bare-metal HAL programming. For drone applications, Betaflight, iNav, ArduPilot, and PX4 all have STM32 HAL targets.
What is the minimum order quantity (MOQ)?
Contact SUPERB Automation for a tailored quote. We support quantities from prototype tray to full production volumes.
Request a Quote
SUPERB Automation supplies genuine STMicroelectronics STM32WB55REV6 MCUs with full traceability and batch-level QA documentation. Whether you need a single tray for prototype builds or pallet-level volumes for production, we source through verified channels with competitive lead times. Contact us with your target quantity and delivery date — we'll respond with a detailed quotation within 24 hours.
STM32WB55REV6: the 68 pin body of the dual core wireless line
The WB55 puts a Cortex-M4 at 64 MHz for the application beside a Cortex-M0+ at 32 MHz that runs the radio stack, with an inter processor communication controller between them. The order code reads: WB wireless line, 55 full feature subfamily, R is 64 pins in the naming scheme but the V body here is the 68 pin VFQFPN at 8 mm by 8 mm, E is the density step below G, and 6 is the industrial range.
The radio covers Bluetooth Low Energy 5.4, 802.15.4, Zigbee, Thread and Matter, with AES-256 in hardware and a public key accelerator. SRAM is 256 Kbytes, 64 of them behind a hardware parity check. ST quotes 303 ULPMark CP, 219.48 CoreMark and a 12-bit ADC at 4.26 Msps. The figures below come from ST's product page for the WB55 line and its current data sheet.
The order code, character by character
| Product family | STM32, 32-bit Arm microcontroller |
| Product line | WB, wireless with dual core |
| Subfamily | 55, full feature with USB and LCD driver |
| Pin count and body | V, 68 pins, VFQFPN 8 mm by 8 mm |
| Flash density | E step, one below G. The family table lists 256 Kbyte, 512 Kbyte and 1 Mbyte steps, so the letter must be quoted in full |
| Temperature | 6, minus 40 to plus 85 degrees C |
| Application core | Cortex-M4 with FPU at 64 MHz, 80 DMIPS |
| Radio core | Cortex-M0+ at 32 MHz, runs the stack |
| SRAM | 256 Kbytes, 64 Kbyte with hardware parity |
| Radio | 2.4 GHz, Bluetooth LE 5.4, 802.15.4, Zigbee, Thread, Matter |
| Crypto | AES-256 in hardware, public key accelerator |
| Clocking | 32 MHz oscillator with integrated trimming capacitors |
| Serial | USB 2.0 full speed without a crystal, two SPI, two I2C, one SAI |
| Display and touch | LCD 8 by 40 with step-up converter, 18 touch sensors |
| Grade | Industrial, ECOPACK2 |
The 68 pin body against the 48 pin body
The extra 20 pins are what a product needs when the radio, the crystal, the debug port and the supply decoupling have taken their share. On the smaller body a display and a keypad compete for the same pins; here the LCD segments and the touch channels can be brought out at once, which is why this body appears in thermostats and access panels rather than in simple beacons.
The VFQFPN package has a thermal pad and no leads, so the solder joint is inspected by x-ray rather than by eye. That is an assembly choice, not a silicon one, and it belongs in the process notes before the stencil is cut, because a pad that is opened too far will wick solder away from the joint.
Questions that arrive with a shortage quote
Is the density letter easy to confuse on this family? It is the most common error. The family carries 256 Kbyte, 512 Kbyte and 1 Mbyte steps under different letters, so a quote that reads only the number is not enough. We confirm the letter against the reel label at incoming inspection.
Does the radio need a 32 MHz crystal? The part integrates the trimming capacitors but still needs the crystal itself. Only the USB clock is generated internally, and that is why the USB device works without a second crystal.
Can the stack be updated over the air? Yes, both the Bluetooth and the 802.15.4 images can be updated over the air, which is why the protected flash region and the bootloader matter to a product that ships before the stack is final.
What to send with an enquiry
Send the quantity, target date, the full order code with the density letter, and the stack version the firmware expects, because the silicon revision and the stack have to match. We check the code against the current revision on our MCU cross reference page and confirm date codes and packaging on the quotation. The lead time solutions page lists what we check before a wireless part is substituted, and the incoming inspection plan covers the programming and labelling checks.