STM32WB55CGU6
Product Specifications
STM32WB55CGU6 — ARM Cortex-M4F + M0+ Microcontroller by STMicroelectronics
The STM32WB55CGU6 is an STMicroelectronics ARM Cortex-M4F + M0+ MCU in UFQFPN-48 for Embedded control and general-purpose MCU applications. Supplied by SUPERB Automation.
Part Number Decoded — Field by Field
| Field | Value | Meaning |
|---|---|---|
| STM32WB55CGU6 | Full Part Number | STMicroelectronics ARM Cortex-M4F + M0+ Microcontroller |
| STM32 | Product Family | STMicroelectronics 32-bit ARM-based MCU |
| WB | Series | ARM Cortex-M4F + M0+ based MCU — WB series |
Quick Specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Part Number | STM32WB55CGU6 |
| Core | ARM Cortex-M4F + M0+ |
| Package | UFQFPN-48 |
| Temperature Range | −40°C to +85°C |
| Supply Voltage | 1.8V–3.6V |
Product Overview
The STM32WB55CGU6 is an STMicroelectronics ARM Cortex-M4F + M0+ microcontroller in UFQFPN-48 package. Part of ST's extensive STM32 portfolio, it delivers a high-performance processing platform with integrated Flash, SRAM, and a rich set of communication peripherals for Embedded control and general-purpose MCU applications. Supplied by SUPERB Automation with full traceability and competitive lead times.
Key Features & Benefits
ARM Cortex-M4F + M0+ Core — Efficient Processing for Embedded Control
The ARM Cortex-M4F + M0+ core provides deterministic real-time performance with hardware multiply/divide and optional FPU, executing control loops, communication stacks, and sensor fusion algorithms efficiently in resource-constrained embedded environments.
Rich Peripheral Set — GPIO, Timers, ADC, Communication Interfaces
Features a comprehensive set of on-chip peripherals including multi-channel DMA, 12/16-bit ADCs, advanced PWM timers for motor control, and multiple USART/SPI/I²C interfaces for sensor and communication module connectivity.
ST Ecosystem — CubeMX, HAL, LL, Middleware
Fully supported by ST's STM32Cube ecosystem including CubeMX graphical configuration, HAL/LL driver libraries, FreeRTOS integration, and extensive middleware stacks (USB, TCP/IP, FATFS, graphics) — accelerating firmware development and reducing time-to-market.
Target Applications
Embedded Control & IoT Systems
Functions as the main processing unit in embedded control systems, IoT endpoints, sensor hubs, motor controllers, and human-machine interfaces — leveraging the Cortex-M architecture for efficient, low-power operation.
Industrial Automation & Motor Control
Powers industrial motor drives, PLCs, sensor transmitters, and factory automation equipment — taking advantage of advanced PWM timers, high-speed ADCs, and CAN/RS-485 communication for distributed control architectures.
Consumer & Portable Electronics
Integrates into consumer devices, wearables, smart home products, and portable instruments — benefiting from the STM32 family's low-power modes, small packages, and extensive third-party firmware ecosystem.
Frequently Asked Questions
Is the STM32WB55CGU6 supported by STM32CubeIDE?
Yes, the STM32WB55CGU6 is fully supported in STM32CubeIDE with graphical pinout configuration, clock tree setup, and automatic peripheral initialization code generation — enabling rapid prototyping and production firmware development.
What firmware/RTOS options are available?
The STM32 family is supported by FreeRTOS, Zephyr, NuttX, ChibiOS, and bare-metal HAL programming. For drone applications, Betaflight, iNav, ArduPilot, and PX4 all have STM32 HAL targets.
What is the minimum order quantity (MOQ)?
Contact SUPERB Automation for a tailored quote. We support quantities from prototype tray to full production volumes.
Request a Quote
SUPERB Automation supplies genuine STMicroelectronics STM32WB55CGU6 MCUs with full traceability and batch-level QA documentation. Whether you need a single tray for prototype builds or pallet-level volumes for production, we source through verified channels with competitive lead times. Contact us with your target quantity and delivery date — we'll respond with a detailed quotation within 24 hours.
STM32WB55CGU6: two cores, a 2.4 GHz radio and 1 Mbyte of flash in a 48 pin QFN
The WB55 is not a microcontroller with a radio bolted on. It ships a Cortex-M4 at 64 MHz for the application and a Cortex-M0+ at 32 MHz that runs the Bluetooth Low Energy and 802.15.4 stack on its own, with an inter processor communication controller between them. The order code reads: WB is the wireless line, 55 is the full feature subfamily, C is 48 pins, G is 1 Mbyte of flash, U is the UFQFPN body, 6 is the industrial range.
The M4 side reaches 80 DMIPS with an ART accelerator and 219.48 CoreMark, and the radio side carries Bluetooth Low Energy 5.4, 802.15.4, Zigbee, Thread and Matter with AES-256 in hardware. ST rates the part at 303 ULPMark CP. The numbers in the table are read from ST's product page for the WB55 line and its current data sheet.
The order code, character by character
| Product family | STM32, 32-bit Arm microcontroller |
| Product line | WB, wireless with dual core |
| Subfamily | 55, full feature with USB and LCD driver |
| Pin count | C, 48 pins |
| Flash density | G, 1 Mbyte |
| Package | U, UFQFPN 7 mm by 7 mm, 0.55 mm body |
| Temperature | 6, minus 40 to plus 85 degrees C |
| Application core | Cortex-M4 with FPU at 64 MHz, 80 DMIPS |
| Radio core | Cortex-M0+ at 32 MHz, runs the stack |
| SRAM | 256 Kbytes, 64 Kbyte with hardware parity |
| Radio | 2.4 GHz, Bluetooth LE 5.4, 802.15.4, Zigbee, Thread, Matter |
| Crypto | AES-256 in hardware, public key accelerator |
| Serial | USB 2.0 full speed without a crystal, two SPI, two I2C, one SAI |
| Analog | 12-bit ADC at 4.26 Msps, two comparators, 2.5 V reference |
| Grade | Industrial, ECOPACK2 |
What the second core actually buys
A single core product that runs a radio stack has to interrupt the application every few milliseconds and hold the timing inside a narrow window. On the WB55 the stack owns the M0+ and the application owns the M4, so a display refresh or an ADC sweep does not push the radio out of its slot. That is why a product with a segment LCD, a keypad and a sensor can keep a stable connection instead of dropping it whenever the screen updates.
The crystal-less USB device and the integrated 32 MHz oscillator with trimming capacitors remove two of the parts that usually sit beside a radio. The antenna matching network, the balun and the ground stitching are still external, and they are where most field failures begin. A module that has already passed certification is the faster route when the schedule matters more than the unit cost.
Questions that arrive with a shortage quote
Can the radio stack be replaced with a custom protocol? The M0+ runs ST's stack from protected flash. Replacing it is not a field change. For a proprietary 2.4 GHz protocol the same die is offered in a plain transceiver product, and that is a different order code.
Does the 1 Mbyte array hold the stack and the application? Yes, with the stack in a protected region and the application in the rest. The split is set at programming time and the sizes are visible in the stack package for the release that is being used.
Is the 48 pin body enough for the LCD driver? The driver is present on the die, but the segment count is limited by the pins that remain after the radio, the crystal and the debug port. A product with more than a small display should check the 68 pin body before fixing the footprint.
What to send with an enquiry
Send the quantity, the target date, the full order code and the stack version that the firmware expects, because the stack and the silicon revision have to match. We check the code against the current revision on our MCU cross reference page and confirm date codes and packaging on the quotation. Wireless parts are frequently allocated, so the lead time solutions page lists what we check before a substitution is proposed, and the incoming inspection plan covers the programming and labelling checks that a radio part needs.