STM32G474CET6
Product Specifications
STM32G474CET6 — ARM Cortex-M4F Microcontroller by STMicroelectronics
The STM32G474CET6 is an STMicroelectronics ARM Cortex-M4F MCU in LQFP-48 for Embedded control and general-purpose MCU applications. Supplied by SUPERB Automation.
Part Number Decoded — Field by Field
| Field | Value | Meaning |
|---|---|---|
| STM32G474CET6 | Full Part Number | STMicroelectronics ARM Cortex-M4F Microcontroller |
| STM32 | Product Family | STMicroelectronics 32-bit ARM-based MCU |
| G4 | Series | ARM Cortex-M4F based MCU — G4 series |
Quick Specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Part Number | STM32G474CET6 |
| Core | ARM Cortex-M4F |
| Package | LQFP-48 |
| Temperature Range | −40°C to +85°C |
| Supply Voltage | 1.8V–3.6V |
Product Overview
The STM32G474CET6 is an STMicroelectronics ARM Cortex-M4F microcontroller in LQFP-48 package. Part of ST's extensive STM32 portfolio, it delivers a high-performance processing platform with integrated Flash, SRAM, and a rich set of communication peripherals for Embedded control and general-purpose MCU applications. Supplied by SUPERB Automation with full traceability and competitive lead times.
Key Features & Benefits
ARM Cortex-M4F Core — Efficient Processing for Embedded Control
The ARM Cortex-M4F core provides deterministic real-time performance with hardware multiply/divide and optional FPU, executing control loops, communication stacks, and sensor fusion algorithms efficiently in resource-constrained embedded environments.
Rich Peripheral Set — GPIO, Timers, ADC, Communication Interfaces
Features a comprehensive set of on-chip peripherals including multi-channel DMA, 12/16-bit ADCs, advanced PWM timers for motor control, and multiple USART/SPI/I²C interfaces for sensor and communication module connectivity.
ST Ecosystem — CubeMX, HAL, LL, Middleware
Fully supported by ST's STM32Cube ecosystem including CubeMX graphical configuration, HAL/LL driver libraries, FreeRTOS integration, and extensive middleware stacks (USB, TCP/IP, FATFS, graphics) — accelerating firmware development and reducing time-to-market.
Target Applications
Embedded Control & IoT Systems
Functions as the main processing unit in embedded control systems, IoT endpoints, sensor hubs, motor controllers, and human-machine interfaces — leveraging the Cortex-M architecture for efficient, low-power operation.
Industrial Automation & Motor Control
Powers industrial motor drives, PLCs, sensor transmitters, and factory automation equipment — taking advantage of advanced PWM timers, high-speed ADCs, and CAN/RS-485 communication for distributed control architectures.
Consumer & Portable Electronics
Integrates into consumer devices, wearables, smart home products, and portable instruments — benefiting from the STM32 family's low-power modes, small packages, and extensive third-party firmware ecosystem.
Frequently Asked Questions
Is the STM32G474CET6 supported by STM32CubeIDE?
Yes, the STM32G474CET6 is fully supported in STM32CubeIDE with graphical pinout configuration, clock tree setup, and automatic peripheral initialization code generation — enabling rapid prototyping and production firmware development.
What firmware/RTOS options are available?
The STM32 family is supported by FreeRTOS, Zephyr, NuttX, ChibiOS, and bare-metal HAL programming. For drone applications, Betaflight, iNav, ArduPilot, and PX4 all have STM32 HAL targets.
What is the minimum order quantity (MOQ)?
Contact SUPERB Automation for a tailored quote. We support quantities from prototype tray to full production volumes.
Request a Quote
SUPERB Automation supplies genuine STMicroelectronics STM32G474CET6 MCUs with full traceability and batch-level QA documentation. Whether you need a single tray for prototype builds or pallet-level volumes for production, we source through verified channels with competitive lead times. Contact us with your target quantity and delivery date — we'll respond with a detailed quotation within 24 hours.
STM32G474CET6: dual bank flash in a 48 pin leaded body
Three letters decide this page. C is 48 pins, E is 512 Kbytes, T is the LQFP body, so the part is the full 512 Kbyte member of the STM32G474 family in the smallest leaded package the family offers, 7 mm by 7 mm with a 0.5 mm pitch. The same die in the same pin count is also sold in a QFN body, and the difference between the two is the assembly trade rather than the silicon.
What the density brings is the two bank flash array with read-while-write, ECC, a proprietary readout protection and a 1 Kbyte OTP page. The core is an Arm Cortex-M4F at 170 MHz with the CORDIC and FMAC accelerators, and the RAM is 128 Kbytes in total, 96 Kbytes of it SRAM and 32 Kbytes of CCM SRAM. Figures are from DS12288 Rev 6.
The 48 pin 512 Kbyte combination
| Order code parts | C 48 pins, E 512 Kbytes, T LQFP, 6 industrial grade |
| Package | LQFP48, 7 mm by 7 mm, 0.5 mm pitch |
| Flash | 512 Kbytes, two banks read-while-write, ECC, PCROP |
| RAM | 128 Kbytes total, 32 Kbytes of CCM SRAM on its own bus |
| Core | Cortex-M4F at 170 MHz, 213 DMIPS, DSP and MPU |
| ADC | Five 12-bit converters at 0.25 microsecond |
| Analog | Seven DAC channels, seven comparators, six op amps |
| Timers | HRTIM at 184 ps, three advanced motor control, 17 in total |
| Fieldbus | Three FDCAN, USART, LPUART, SPI, I2C and USB full speed |
| I/O | Up to 40 fast lines on this body |
| Endurance | 10 kcycles, retention 15 years at 85 degrees C after 10 kcycles |
| Temperature | Minus 40 to plus 85 degrees C, 105 degree junction |
Why buy the flash if the pins are the limit
Because the two budgets are independent. A servo drive with a fieldbus stack, a motion profile table, a bootloader and a calibration area can use 300 Kbytes of code and still be happy on 40 lines, since the power stage is driven by the high resolution timer on a fixed pin set and the feedback arrives through a multiplexed converter. Buying the 100 pin body for the flash would add cost and board area for lines that stay unused.
The dual bank matters on the same product once it is sealed. A firmware update can run from the idle bank while the motor keeps turning, so the drive does not have to be stopped at a maintenance window, and a power interruption leaves the old image intact. On the 128 Kbyte member of this family that is not available, and the update has to run from RAM or with the output disabled.
Leaded body, fine pitch, ordinary process
The LQFP48 at 0.5 mm is the package a contract line can place, inspect and rework without special tooling. Optical inspection sees every joint, reflow follows the same profile as the rest of the board, and a single part can be replaced with hot air in under a minute. The QFN version of the same die is smaller and better thermally, and it hides its joints under the body, which is a real cost at the prototype stage.
The thermal path is through the leads and the die pad, so the copper under the part still sets the junction. At 170 MHz with five converters and the HRTIM running, the body dissipates enough that a two layer board in a sealed housing should be checked with a thermocouple on the first article rather than assumed. Our test coverage strategy page sets out what we measure at the board level, including the supply rails, the clock and the programming port, so a thermal or a solder issue shows up before the unit ships.
Questions that arrive with a quote request
Is CET6 the same silicon as CEU6? Yes, and the pinout is the same, the difference is the body and the moisture sensitivity level. Can the 128 Kbyte part be replaced by this one on an existing board? On the same package it can, with the firmware rebuilt and the option bytes set for the density, and the MCU cross reference page records which pairs in the family share a footprint.
Does the part need external components for the USB port? Yes, a full speed device port needs its series resistors and, unless the crystal-less mode is used, a 4 to 48 MHz crystal. What is the packing form? Tray or tube unless a TR suffix is named, and the packing form belongs on the purchase order because a placement line cannot run from a tray without a re-reel step. Our component traceability report ties the reel to the vendor lot so the packing and the lot are both on record.