Contact Us

STM32G0B0CET6

Brand: ST
STM32G0B0CET6 is a ARM Cortex-M microcontroller from STMicroelectronics, designed for drone electronics, embedded control systems, and industrial IoT applications. Superb Automation supplies genuine STM32G0B0CET6 with full traceability, competitive pricing, and fast global delivery — supporting prototype to production volumes for drone, robotics, and industrial customers worldwide.
quote now

Product Specifications

STM32G0B0CET6 — ARM Cortex-M0+ Microcontroller by STMicroelectronics

The STM32G0B0CET6 is an STMicroelectronics ARM Cortex-M0+ MCU in LQFP for Embedded control and general-purpose MCU applications. Supplied by SUPERB Automation.

Part Number Decoded — Field by Field

FieldValueMeaning
STM32G0B0CET6Full Part NumberSTMicroelectronics ARM Cortex-M0+ Microcontroller
STM32Product FamilySTMicroelectronics 32-bit ARM-based MCU
G0SeriesARM Cortex-M0+ based MCU — G0 series

Quick Specifications

ParameterValue
ManufacturerSTMicroelectronics
Part NumberSTM32G0B0CET6
CoreARM Cortex-M0+
PackageLQFP
Temperature Range−40°C to +85°C
Supply Voltage1.8V–3.6V

Product Overview

The STM32G0B0CET6 is an STMicroelectronics ARM Cortex-M0+ microcontroller in LQFP package. Part of ST's extensive STM32 portfolio, it delivers a high-performance processing platform with integrated Flash, SRAM, and a rich set of communication peripherals for Embedded control and general-purpose MCU applications. Supplied by SUPERB Automation with full traceability and competitive lead times.

Key Features & Benefits

ARM Cortex-M0+ Core — Efficient Processing for Embedded Control

The ARM Cortex-M0+ core provides deterministic real-time performance with hardware multiply/divide and optional FPU, executing control loops, communication stacks, and sensor fusion algorithms efficiently in resource-constrained embedded environments.

Rich Peripheral Set — GPIO, Timers, ADC, Communication Interfaces

Features a comprehensive set of on-chip peripherals including multi-channel DMA, 12/16-bit ADCs, advanced PWM timers for motor control, and multiple USART/SPI/I²C interfaces for sensor and communication module connectivity.

ST Ecosystem — CubeMX, HAL, LL, Middleware

Fully supported by ST's STM32Cube ecosystem including CubeMX graphical configuration, HAL/LL driver libraries, FreeRTOS integration, and extensive middleware stacks (USB, TCP/IP, FATFS, graphics) — accelerating firmware development and reducing time-to-market.

Target Applications

Embedded Control & IoT Systems

Functions as the main processing unit in embedded control systems, IoT endpoints, sensor hubs, motor controllers, and human-machine interfaces — leveraging the Cortex-M architecture for efficient, low-power operation.

Industrial Automation & Motor Control

Powers industrial motor drives, PLCs, sensor transmitters, and factory automation equipment — taking advantage of advanced PWM timers, high-speed ADCs, and CAN/RS-485 communication for distributed control architectures.

Consumer & Portable Electronics

Integrates into consumer devices, wearables, smart home products, and portable instruments — benefiting from the STM32 family's low-power modes, small packages, and extensive third-party firmware ecosystem.

Frequently Asked Questions

Is the STM32G0B0CET6 supported by STM32CubeIDE?

Yes, the STM32G0B0CET6 is fully supported in STM32CubeIDE with graphical pinout configuration, clock tree setup, and automatic peripheral initialization code generation — enabling rapid prototyping and production firmware development.

What firmware/RTOS options are available?

The STM32 family is supported by FreeRTOS, Zephyr, NuttX, ChibiOS, and bare-metal HAL programming. For drone applications, Betaflight, iNav, ArduPilot, and PX4 all have STM32 HAL targets.

What is the minimum order quantity (MOQ)?

Contact SUPERB Automation for a tailored quote. We support quantities from prototype tray to full production volumes.

Request a Quote

SUPERB Automation supplies genuine STMicroelectronics STM32G0B0CET6 MCUs with full traceability and batch-level QA documentation. Whether you need a single tray for prototype builds or pallet-level volumes for production, we source through verified channels with competitive lead times. Contact us with your target quantity and delivery date — we'll respond with a detailed quotation within 24 hours.

STM32G0B0CET6: 512 Kbytes of flash in two banks on a value line core

B0 is the value line of the G0 family, and the CE part is the large memory member of it. STM32 is the family, G the mainstream line, 0B0 the value subfamily, C the 48 pin body, E the 512 Kbyte flash density, T the low profile quad flat package at 7 mm by 7 mm, and 6 the industrial range of minus 40 to plus 85 degrees C. The value line keeps the Cortex-M0+ core at 64 MHz and drops the features it does not need: the supply floor rises to 2.0 V, the temperature range stops at 85 degrees C, and the Power Delivery controller of the G071 is not on the die.

What the part does carry is memory. The 512 Kbytes of flash are split into two banks with read while write support, so a firmware update can be received into one bank while the other keeps running, which is the reason to choose this part over a single bank device with the same density. The SRAM is 144 Kbytes, 128 Kbytes of it with hardware parity. Six USARTs, three SPI ports at 32 Mbit/s, three I2C ports at 1 Mbit/s, twelve timers and a USB 2.0 full speed device and host controller sit around the core, and the 12 bit converter converts in 0.4 microseconds with up to sixteen external channels and hardware oversampling to 16 bits.

The order code, character by character

Product familySTM32, 32 bit Arm microcontroller
Product lineG0, mainstream Cortex-M0+
Subfamily0B0, value line with dual bank flash and USB
Pin countC, 48 pins
Flash densityE, 512 Kbytes in two banks
PackageT, LQFP 7 mm by 7 mm
Temperature6, minus 40 to plus 85 degrees C ambient
Supply2.0 to 3.6 V
SRAM144 Kbytes, 128 Kbytes with hardware parity
Bank size256 Kbytes per bank, read while write between them
Serial6 USART, 3 SPI at 32 Mbit/s, 3 I2C at 1 Mbit/s
USB2.0 full speed device and host controller
Timers12, including one advanced 16 bit timer for motor control
Analog12 bit ADC, 0.4 us per conversion, 16 external channels

Two banks, and what that buys a field update

Each bank is 256 Kbytes and the read while write support is the whole point of the split. A bootloader in bank one can erase and program bank two while the application keeps executing from bank one, then swap at the next reset. That gives a product a fallback image without an external memory device, which on a 48 pin board is the difference between a working update path and none at all. The cost is that the erase granularity is per bank, so a 300 Kbyte image does not fit in one bank and the update strategy has to be a swap of both banks rather than a partial write.

The 144 Kbytes of SRAM follows the same logic: a USB host stack, a file system buffer and an ADC capture can all be resident at once. A 16 bit oversampled capture on eight channels at 20 kHz is 320 Kbytes per second, so a 400 ms record is 128 Kbytes, which is why this density exists in the line. The parity window covers 128 of the 144 Kbytes, so a buffer placed in the last 16 Kbytes loses the check.

Questions that arrive with a shortage quote

Does the value line run from 1.7 V like the rest of the family? No. The B0 part is specified from 2.0 V, so a board built around a 1.8 V rail cannot use it. A 3.3 V rail with five percent tolerance sits at 3.135 V and is comfortably inside the window; the 2.0 V floor only matters on a lithium cell that is allowed to run flat.

Is 512 Kbytes of flash usable without the second bank? Yes, the part runs as a single 512 Kbyte array, and many products never touch the bank swap. The feature is the reason the silicon exists, though, and a product that does use it needs the bootloader to sit in a protected region of bank one rather than in the main array.

Why does the 85 degree limit matter on a motor board? Because a 48 pin value part is often placed next to the power stage. At 85 degrees C ambient, a case that rises 25 degrees above ambient in still air reaches 110 degrees C at the die, which is inside the junction rating but leaves little margin for a blocked fan or a hot day. A 105 degree grade exists in other subfamilies and is worth asking for when the enclosure is sealed.

What to send with an enquiry

Four fields decide the price and the date: quantity, target date, the full order code with the temperature suffix, and whether the board needs the dual bank bootloader. Send the string and we check it on the MCU cross reference page, then confirm date codes, packing and origin on the quotation. Second sources and alternates for a long life product are handled through the obsolescence management route, and the one stop BOM sourcing page covers mixed bills where the memory and the passives come from the same order.