STM32F217VGT6
Product Specifications
STM32F217VGT6
ST — MCU & Embedded Processors
Product Overview
The STM32F217VGT6 from ST is a microcontroller / embedded processor engineered for real-time control, signal processing, and connectivity. STMicroelectronics is a European semiconductor leader with a strong portfolio in MCUs, power management, sensors, and analog ICs.
Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.
Key Features
- ARM Cortex / RISC-V / proprietary core with high-performance real-time processing
- Integrated flash memory and SRAM for efficient code execution
- Rich peripheral set: UART, SPI, I2C, ADC, timers, PWM
- Low-power modes for battery-operated and energy-sensitive applications
- Hardware security features: secure boot, crypto accelerator, TRNG
- Extensive development ecosystem with IDE, HAL, and RTOS support
Key Specifications
| Core | — |
| Max Frequency | MHz |
| Flash | KB |
| SRAM | KB |
| GPIO | — |
| ADC | bits |
| Interfaces | — |
| Supply Voltage | V |
| Operating Temp | °C |
| Package | — |
Applications
Request Quote — In Stock, 100% New & Original, Full Warranty
STM32F217VGT6: 1024 Kbyte, LQFP100 body
STM32F217VGT6 is a member of the STM32F215 and STM32F217 performance line with cryptographic acceleration described by DocID17050 Rev 13. The order code fixes 1024 Kbytes of Flash, 128 Kbytes of SRAM, the LQFP100 body at 14 x 14 mm with 100 pins, 82 general purpose I/O and 16 external channels on each of the 12 bit converters, and the core runs at up to 120 MHz from a 1.8 to 3.6 V supply.
Order code and memory
| Order code | STM32F217VGT6 |
| Program Flash | 1024 Kbytes |
| SRAM | 128 Kbytes |
| Package | LQFP100, 14 x 14 mm, 100 pins |
| Maximum general purpose I/O | 82 |
| Analog input channels | 16 external channels per converter |
| Digital to analog converter | not present |
| External memory controller | bank 1 or bank 2 only on this 100 pin body, bank 1 multiplexed NOR or PSRAM on NE1, bank 2 a 16 or 8 bit NAND on NCE2, no interrupt line because port G is not bonded |
| Supply voltage | 1.8 to 3.6 V |
| Maximum CPU clock | 120 MHz |
| Temperature grade | suffix 6, minus 40 to plus 85 C ambient, 105 C junction |
| Datasheet | DocID17050 Rev 13 |
Peripheral and electrical parameters
| Core | ARM Cortex-M3 at up to 120 MHz with the adaptive real time accelerator, 1.25 DMIPS per MHz, 150 DMIPS, a memory protection unit and single cycle multiply and divide |
| Clock sources | 4 to 26 MHz high speed external crystal, 16 MHz factory trimmed internal RC, 32.768 kHz low speed internal and external sources, a main PLL and a separate audio PLL for the I2S blocks |
| Timers | two advanced-control 16 bit timers with complementary outputs and dead time, four full featured general purpose timers of which TIM2 and TIM5 are 32 bit, six further general purpose 16 bit timers, two basic timers, the independent and window watchdogs, the SysTick counter and the RTC, which is the seventeen the cover counts |
| Serial interfaces | three SPI blocks two of which mux to I2S, three I2C blocks, four USARTs and two UARTs, two CAN 2.0B active controllers and one SDIO interface |
| DMA | two DMA controllers with eight streams each and a FIFO per stream, sixteen streams in total, with circular buffer support |
| ADC | three 12 bit successive approximation converters with a 0.5 microsecond conversion time, each sharing up to 16 external channels, up to 24 channels across the three on the larger bodies and up to 6 Msps in triple interleaved mode |
| DAC | two 12 bit channels with output buffers |
| Ethernet | 10/100 MAC with dedicated DMA, MII or RMII, IEEE 1588 timestamping |
| Camera interface | parallel camera interface present in the line, but the usable data width on this body follows the pin table and is limited to the low byte |
| Cryptographic acceleration | AES 128, 192 and 256 bit, Triple DES and a HASH unit for MD5 and SHA-1, plus an analog true random number generator |
| Programmable voltage detector | programmable voltage detector with selectable thresholds, plus power on reset, power down reset and brownout reset |
| Debug port | serial wire debug and JTAG, with the trace port sharing low order port bits |
| Backup domain | the VBAT domain keeps the RTC, the 4 Kbytes of backup SRAM and the backup registers alive with the main rail off |
| Flash endurance and retention | 10 kcycles at minus 40 to plus 85 C and 1 kcycle at 105 C, with 30 years of retention at 85 C after one kcycle, 20 years at 55 C after 10 kcycles and 10 years at 105 C |
| Thermal resistance junction to ambient | 46 C/W on this package |
| Input tolerance | almost all inputs 5 V tolerant, with fast I/O toggling to 60 MHz on the larger bodies |
| USB | one OTG full speed port on the device pins and one OTG high speed port that needs an external ULPI PHY |
| Status | production data per the datasheet cover |
Points to check before this part goes on a BOM
This code is the complete security and network set in one package: 1 Mbyte of Flash, the 10/100 MAC with IEEE 1588, the AES and HASH blocks with the true random number generator, two CAN channels and three converters. It is the densest function per square millimetre in the range, and the price of that density is the reduced memory controller and the limited camera width.
A secure gateway usually needs two network paths, one untrusted and one trusted, and this device has only one MAC. The second path is typically CAN, which is present, or a UART with an external transceiver; a second Ethernet port requires an external switch or a second controller and is the reason some boards move to a part with two MACs.
The memory controller on 100 pins allows bank 1 with NE1 in multiplexed mode or bank 2 as NAND, and nothing more. A gateway that logs encrypted traffic to a NAND works within that limit; one that needs a wide SRAM buffer does not, and takes the 144 pin body, where the full controller is bonded.
The cryptographic block processes data through its own bus and can run beside the core, so a gateway can encrypt a stream while the core handles the protocol. The current for that block is not in the idle figure, and a device that runs encryption continuously should be measured with traffic rather than assumed to be inside the thermal budget of 46 C/W.
Ethernet with IEEE 1588 needs a PHY that supports hardware timestamping for the feature to be meaningful, and the reference clock has to be routed to the device with the same care as a crystal. On a secure gateway that synchronizes with a substation clock, the timestamp path is part of the threat model, not only a performance question.
Where this order code fits
It is 1 Mbyte, Ethernet and the cryptographic block in the 100 pin body, the configuration used by secure gateways and protocol converters that need a network port and hardware encryption in a 14 x 14 mm package. Boards comparing it against a neighbouring memory size or pin count start from our MCU Cross Reference page, and boards replacing a line that has gone end of life start from the Pin to Pin Cross Reference page. Both list the figures that have to match before a substitute goes on a BOM.
Questions buyers ask
Does this part have both Ethernet and the cryptographic block? Yes. The F217 line carries the MAC with IEEE 1588 and the STM32F21x cryptographic block, and both are present on this code in the 100 pin package.
How many Ethernet ports does the device support? One MAC, so one port. Boards that need two network paths use CAN, a serial port with an external transceiver, or an external switch.
Can the camera interface be used at full width here? No. The 100 pin body bonds only the low byte of the parallel interface, which covers 8 bit sensors. Wider sensors need the 144 or 176 pin body.
SUPERB holds and sources ST microcontroller lines including this order code for production and repair demand, quoted against the exact ordering string with date codes and packing stated. When a line is changing, the Component Obsolescence Management page sets out the checks that keep a substitute from failing on the bench.