STM32F207ZET6
Product Specifications
STM32F207ZET6
ST — MCU & Embedded Processors
Product Overview
The STM32F207ZET6 from ST is a microcontroller / embedded processor engineered for real-time control, signal processing, and connectivity. STMicroelectronics is a European semiconductor leader with a strong portfolio in MCUs, power management, sensors, and analog ICs.
Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.
Key Features
- ARM Cortex / RISC-V / proprietary core with high-performance real-time processing
- Integrated flash memory and SRAM for efficient code execution
- Rich peripheral set: UART, SPI, I2C, ADC, timers, PWM
- Low-power modes for battery-operated and energy-sensitive applications
- Hardware security features: secure boot, crypto accelerator, TRNG
- Extensive development ecosystem with IDE, HAL, and RTOS support
Key Specifications
| Core | — |
| Max Frequency | MHz |
| Flash | KB |
| SRAM | KB |
| GPIO | — |
| ADC | bits |
| Interfaces | — |
| Supply Voltage | V |
| Operating Temp | °C |
| Package | — |
Applications
Request Quote — In Stock, 100% New & Original, Full Warranty
STM32F207ZET6: 512 Kbyte, LQFP144 body
STM32F207ZET6 is a member of the STM32F205 and STM32F207 performance line described by DS6329 Rev 18. The order code fixes 512 Kbytes of Flash, 128 Kbytes of SRAM, the LQFP144 body at 20 x 20 mm with 144 pins, 114 general purpose I/O and 16 external channels on each of the 12 bit converters, and the core runs at up to 120 MHz from a 1.8 to 3.6 V supply.
Order code and memory
| Order code | STM32F207ZET6 |
| Program Flash | 512 Kbytes |
| SRAM | 128 Kbytes |
| Package | LQFP144, 20 x 20 mm, 144 pins |
| Maximum general purpose I/O | 114 |
| Analog input channels | 16 external channels per converter |
| Digital to analog converter | not present |
| External memory controller | full flexible static memory controller with four chip selects |
| Supply voltage | 1.8 to 3.6 V |
| Maximum CPU clock | 120 MHz |
| Temperature grade | suffix 6, minus 40 to plus 85 C ambient, 105 C junction |
| Datasheet | DS6329 Rev 18 |
Peripheral and electrical parameters
| Core | ARM Cortex-M3 at up to 120 MHz with the adaptive real time accelerator, 1.25 DMIPS per MHz, 150 DMIPS, a memory protection unit and single cycle multiply and divide |
| Clock sources | 4 to 26 MHz high speed external crystal, 16 MHz factory trimmed internal RC, 32.768 kHz low speed internal and external sources, a main PLL and a separate audio PLL for the I2S blocks |
| Timers | two advanced-control 16 bit timers with complementary outputs and dead time, four full featured general purpose timers of which TIM2 and TIM5 are 32 bit, six further general purpose 16 bit timers, two basic timers, the independent and window watchdogs, the SysTick counter and the RTC, which is the seventeen the cover counts |
| Serial interfaces | three SPI blocks two of which mux to I2S, three I2C blocks, four USARTs and two UARTs, two CAN 2.0B active controllers and one SDIO interface |
| DMA | two DMA controllers with eight streams each and a FIFO per stream, sixteen streams in total, with circular buffer support |
| ADC | three 12 bit successive approximation converters with a 0.5 microsecond conversion time, each sharing up to 16 external channels, up to 24 channels across the three on the larger bodies and up to 6 Msps in triple interleaved mode |
| DAC | two 12 bit channels with output buffers |
| Ethernet | 10/100 MAC with dedicated DMA, MII or RMII, IEEE 1588 timestamping |
| Camera interface | parallel camera interface, 8 to 14 bit, with its own DMA |
| Cryptographic acceleration | not present on this part |
| Programmable voltage detector | programmable voltage detector with selectable thresholds, plus power on reset, power down reset and brownout reset |
| Debug port | serial wire debug and JTAG, with the trace port sharing low order port bits |
| Backup domain | the VBAT domain keeps the RTC, the 4 Kbytes of backup SRAM and the backup registers alive with the main rail off |
| Flash endurance and retention | 10 kcycles at minus 40 to plus 85 C and 1 kcycle at 105 C, with 30 years of retention at 85 C after one kcycle, 20 years at 55 C after 10 kcycles and 10 years at 105 C |
| Thermal resistance junction to ambient | 40 C/W on this package |
| Input tolerance | almost all inputs 5 V tolerant, with fast I/O toggling to 60 MHz on the larger bodies |
| USB | one OTG full speed port on the device pins and one OTG high speed port that needs an external ULPI PHY |
| Status | production data per the datasheet cover |
Points to check before this part goes on a BOM
The E field in the order code is 512 Kbytes, and the more important number is the SRAM: 112 Kbytes of SRAM1 plus 16 Kbytes of SRAM2. That step, from the 96 Kbytes of the 256 Kbyte part to 128 Kbytes here, is what makes a network stack with two full duplex buffers and a 4 Kbyte application workspace comfortable rather than marginal.
Five hundred and twelve Kbytes of Flash is the point at which a 120 MHz application with a TCP stack, a bootloader and a diagnostics path stops needing careful pruning. With the ART accelerator the core executes from Flash at zero wait states for most code, so the density buys room for library code rather than speed.
The camera interface takes 8 to 14 bit data at up to 48 Mbyte per second with its own DMA, and on this 144 pin body it collides with the memory controller at widths above 10 bit. Boards that stream frames and also use external memory either reduce the camera to 8 or 10 bit or accept the narrower memory bus, and the pin table resolves which of the two is cheaper for the board.
Two CAN channels on this device are worth noting because the pin budget is tight. CAN1 and CAN2 share port B and port D pins with the memory controller and the second SPI, so a board that needs both CAN channels, a full 16 bit memory bus and RMII on 114 pins has to give up something, usually the second SPI or the wide memory bus.
The thermal figure is 40 C/W, about 500 mW at 85 C ambient. At 120 MHz with the MAC running and a 16 bit external bus switching at 60 MHz, the core and the I/O current together come close to the budget, and the external memory device adds its own heat inside the same enclosure. A 105 C rated version of the same part is available for equipment without forced air.
Where this order code fits
It is the 512 Kbyte step, the first density in the range with the full 128 Kbytes of SRAM, and the most common choice for an instrument that runs everything from internal memory and needs Ethernet. Boards comparing it against a neighbouring memory size or pin count start from our MCU Cross Reference page, and boards replacing a line that has gone end of life start from the Pin to Pin Cross Reference page. Both list the figures that have to match before a substitute goes on a BOM.
Questions buyers ask
What does the 512 Kbyte density add over 256 Kbytes? Double the Flash and the full SRAM configuration: 112 plus 16 Kbytes against 80 plus 16 Kbytes. The peripheral set, the pinout and the package are identical, so the choice between the two is memory only.
Is this part rated for 105 C ambient? The T6 suffix is minus 40 to plus 85 C ambient with a 125 C junction. The same device is available with the suffix 7 for minus 40 to plus 105 C ambient, which is the code to specify for sealed enclosures.
How much Flash does a TCP stack plus bootloader leave? A bootloader with update support takes 16 to 24 Kbytes, a TCP stack with a device driver 40 to 60 Kbytes, and a small file system 10 to 20 Kbytes. On 512 Kbytes that leaves roughly 400 Kbytes for the application, which is generous for an instrument and tight for a graphics front end.
SUPERB holds and sources ST microcontroller lines including this order code for production and repair demand, quoted against the exact ordering string with date codes and packing stated. When a line is changing, the Component Lead Time Solutions page sets out the checks that keep a substitute from failing on the bench.