Contact Us

STM32F102CBT6

Brand: ST
ST STM32F102CBT6 is a mcu & embedded component designed for general electronics and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

STM32F102CBT6 — MCU & Embedded Processors | Superb Automation

STM32F102CBT6

ST — MCU & Embedded Processors

Product Overview

The STM32F102CBT6 from ST is a microcontroller / embedded processor engineered for real-time control, signal processing, and connectivity. STMicroelectronics is a European semiconductor leader with a strong portfolio in MCUs, power management, sensors, and analog ICs.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • ARM Cortex / RISC-V / proprietary core with high-performance real-time processing
  • Integrated flash memory and SRAM for efficient code execution
  • Rich peripheral set: UART, SPI, I2C, ADC, timers, PWM
  • Low-power modes for battery-operated and energy-sensitive applications
  • Hardware security features: secure boot, crypto accelerator, TRNG
  • Extensive development ecosystem with IDE, HAL, and RTOS support

Key Specifications

Core—
Max FrequencyMHz
FlashKB
SRAMKB
GPIO—
ADCbits
Interfaces—
Supply VoltageV
Operating Temp°C
Package—

Applications

Industrial Motor Control IoT Edge Nodes Consumer Electronics Automotive Body Control Smart Home & Appliances Medical Portable Devices

Request Quote — In Stock, 100% New & Original, Full Warranty

STM32F102CBT6: 128 Kbyte, LQFP48 body

STM32F102CBT6 is a member of the STM32F102 USB access line medium density described by DS5933 Rev 7. The order code fixes 128 Kbytes of Flash, 16 Kbytes of SRAM, the LQFP48 body at 7 x 7 mm with 48 pins, 37 general purpose I/O and 10 external channels on each of the 12 bit converters, and the core runs at up to 48 MHz from a 2.0 to 3.6 V supply.

Order code and memory

Order codeSTM32F102CBT6
Program Flash128 Kbytes
SRAM16 Kbytes
PackageLQFP48, 7 x 7 mm, 48 pins
Maximum general purpose I/O37
Analog input channels10 external channels per converter
Digital to analog converternot present
External memory controllernot present on this line
Supply voltage2.0 to 3.6 V
Maximum CPU clock48 MHz
Temperature gradesuffix 6, minus 40 to plus 85 C ambient, 105 C junction
DatasheetDS5933 Rev 7

Peripheral and electrical parameters

CoreARM Cortex-M3 at up to 48 MHz, 1.25 DMIPS per MHz, single cycle multiply and divide
Clock sources8 MHz factory trimmed internal RC, PLL up to the 48 MHz core clock, external crystal range 4 to 16 MHz
Timersthree general purpose 16 bit timers with four compare channels each, the independent and window watchdogs and the SysTick counter
Serial interfacestwo SPI blocks, two I2C blocks, three USARTs and one USB full speed device port, which is the eight communication interfaces the cover counts
DMA7 channel DMA controller serving the USARTs, the SPI blocks and the converter
ADC12 bit successive approximation, 1.2 microsecond conversion with APB2 at 12, 24 or 48 MHz, 10 channels on 48 pins and 16 on 64 pins
DACnot present on this line
Ethernetnot present on this line
Camera interfacenot present on this line
Cryptographic accelerationnot present on this line
Programmable voltage detectorprogrammable voltage detector with eight falling thresholds from 2.00 V to 2.88 V nominal
Debug portserial wire debug on two pins and JTAG on five, with the trace port sharing low order port bits
Backup domainthe VBAT domain keeps the RTC and the backup registers alive with the main rail off
Flash endurance and retention10 kcycles with 30 years of retention at 85 C after 1 kcycle
Thermal resistance junction to ambient55 C/W on this package
Input tolerancealmost all inputs 5 V tolerant
USBfull speed device at 12 Mbit/s, with the 48 MHz clock taken from the PLL and an external crystal as the reference
Statusproduction data per the datasheet cover

Points to check before this part goes on a BOM

The B in the order code is the 128 Kbyte memory field, and the pairing with 16 Kbytes of SRAM is the largest on this line. A 48 pin body with that much memory is unusual and it exists for firmware that carries a protocol stack, a bootloader and a calibration image at the same time. The pin count and the peripheral set are identical to the 64 Kbyte code, so the extra memory costs nothing in board area.

Packing 128 Kbytes into a 48 pin part does not add converter channels: the body still brings out 10. A board that needs 16 analog inputs has to move to the 64 pin code and accept that the memory then stops at 128 Kbytes with a different pinout. The two requirements, more memory and more analog, do not both improve by staying in the 48 pin package.

The 16 Kbytes of SRAM changes the USB story. A mass storage class device that buffers a 512 byte sector and a second sector for the write path, plus the endpoint descriptors and the stack, fits comfortably, and there is room for a small file system cache. On the 10 Kbyte part the same firmware has to write through without a second buffer and performance drops accordingly.

Flash endurance on this line is 10 kcycles at minus 40 to plus 85 C with 30 years of retention after one kcycle. With 128 Kbytes the firmware can afford a wear levelling scheme across several sectors for the parameters it writes often, which the 32 Kbyte part cannot do without losing application space. That is a practical difference on a data logger that stores a setpoint every minute.

The 48 pin body is 55 C/W, so at 85 C ambient the total dissipation budget is about 360 mW. The core at 48 MHz with USB active and a converter running uses a large part of it, which is why a board in this package that also drives a display or a relay coil should be checked pin by pin rather than assumed to be inside the budget.

Where this order code fits

It is the top of the F102 memory range in the smallest package, 128 Kbytes of Flash and 16 Kbytes of SRAM in a 7 x 7 mm 48 pin body, for firmware heavy USB devices that cannot give up board area. Boards comparing it against a neighbouring memory size or pin count start from our MCU Cross Reference page, and boards replacing a line that has gone end of life start from the Component Lead Time Solutions page. Both list the figures that have to match before a substitute goes on a BOM.

Questions buyers ask

Is the 128 Kbyte code available in the 64 pin package? Yes, as STM32F102RBT6, with 51 general purpose pins and 16 converter channels. The two codes share the memory and the peripheral set and differ only in package and pin count.

What does the extra Flash allow that the 64 Kbyte part cannot do? A bootloader, an application and a separate parameter region with wear levelling spread over several sectors. On the 64 Kbyte part the same firmware has to overwrite the parameter sector in place or keep the parameters in the backup registers.

Does this part support USB host mode? No. The USB peripheral on the STM32F102 line is a full speed device controller, not an OTG or host controller. Boards that need host or OTG move to the STM32F105 or STM32F2 lines.

SUPERB holds and sources ST microcontroller lines including this order code for production and repair demand, quoted against the exact ordering string with date codes and packing stated. When a line is changing, the BOM Shortage Recovery page sets out the checks that keep a substitute from failing on the bench.