Contact Us

STM32F100VCT6B

Brand: ST
ST STM32F100VCT6B is a mcu & embedded component designed for general electronics and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

STM32F100VCT6B — MCU & Embedded Processors | Superb Automation

STM32F100VCT6B

ST — MCU & Embedded Processors

Product Overview

The STM32F100VCT6B from ST is a microcontroller / embedded processor engineered for real-time control, signal processing, and connectivity. STMicroelectronics is a European semiconductor leader with a strong portfolio in MCUs, power management, sensors, and analog ICs.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • ARM Cortex / RISC-V / proprietary core with high-performance real-time processing
  • Integrated flash memory and SRAM for efficient code execution
  • Rich peripheral set: UART, SPI, I2C, ADC, timers, PWM
  • Low-power modes for battery-operated and energy-sensitive applications
  • Hardware security features: secure boot, crypto accelerator, TRNG
  • Extensive development ecosystem with IDE, HAL, and RTOS support

Key Specifications

Core—
Max FrequencyMHz
FlashKB
SRAMKB
GPIO—
ADCbits
Interfaces—
Supply VoltageV
Operating Temp°C
Package—

Applications

Industrial Motor Control IoT Edge Nodes Consumer Electronics Automotive Body Control Smart Home & Appliances Medical Portable Devices

Request Quote — In Stock, 100% New & Original, Full Warranty

STM32F100VCT6B: 256 Kbyte, LQFP100 body

STM32F100VCT6B is a member of the STM32F100 value line high density described by DS5944 Rev 11. The order code fixes 256 Kbytes of Flash, 24 Kbytes of SRAM, the LQFP100 body at 14 x 14 mm with 100 pins, 80 general purpose I/O and 16 channels of the 12 bit converter, and the core runs at up to 24 MHz from a 2.0 to 3.6 V supply.

Order code and memory

Order codeSTM32F100VCT6B
Program Flash256 Kbytes
SRAM24 Kbytes
PackageLQFP100, 14 x 14 mm, 100 pins
Maximum general purpose I/O80
Analog input channels16 of the 12 bit converter
Digital to analog converter2 channels of 12 bits
External memory controllerflexible static memory controller, bank 1 only on this body, multiplexed NOR and PSRAM
Supply voltage2.0 to 3.6 V
Maximum CPU clock24 MHz
Temperature gradesuffix 6, minus 40 to plus 85 C ambient, 105 C junction
DatasheetDS5944 Rev 11

Peripheral and electrical parameters

CoreARM Cortex-M3 at up to 24 MHz, 1.25 DMIPS per MHz, single cycle multiply and divide
Clock sources8 MHz factory trimmed internal RC, PLL up to the 24 MHz core clock, external crystal on the high speed oscillator
Timersone advanced-control 16 bit timer with four channels and complementary outputs, ten general-purpose 16 bit timers and two basic timers, which with the two watchdogs is the sixteen the cover counts
Serial interfacesthree SPI blocks, two I2C blocks, three USARTs and two UARTs, plus one HDMI CEC channel
DMA12 channel DMA across two controllers
ADC12 bit successive approximation, 16 channels, conversion range 0 to 3.6 V
DAC2 channels of 12 bits with output buffers
Programmable voltage detectoreight falling thresholds from 2.00 V to 2.88 V nominal, each with a rising edge about 100 mV higher
Debug portserial wire debug on two pins and JTAG on five, with the trace port sharing low order port bits
Backup domainVBAT domain keeps the RTC, the backup registers and the tamper input alive with the main rail off
Flash endurance and retention10 kcycles at minus 40 to plus 85 C, 1 kcycle at 105 C, 30 years of retention at 85 C after one kcycle and 10 years at 105 C
Thermal resistance junction to ambient40 C/W on this package
Input tolerancealmost all inputs 5 V tolerant
USBnot present, USB full speed is the STM32F102 line
Statusproduction data per the datasheet cover

Points to check before this part goes on a BOM

The trailing B is an internal code, so the 256 Kbytes of Flash, the 24 Kbytes of SRAM, the LQFP100 body, the 80 general purpose I/O and the external memory controller are all as described for the unlettered code. What the letter changes is the orderable string, which is what a receiving inspection, a qualification report and a traceability record have to carry. Two parts that behave the same on the bench are still two parts in a quality system.

The memory controller on this body is bank 1 only, and bank 1 on the LQFP100 package drives a multiplexed NOR or PSRAM device. That is enough for a small TFT controller with a parallel interface or for PSRAM used as a frame buffer, and it is not enough for a NAND device or for two independent chip selects. The 144 pin body of the same family is where the second bank and the extra chip selects live.

The high density interface set is what separates this code from the medium density 128 Kbyte part in the same package: three SPI blocks against two, five asynchronous ports against three, ten general purpose timers against six, and 24 Kbytes of SRAM against 8. On a board that has to talk to a display, a host, a radio and two sensors at the same time, that is the difference between needing an external multiplexer and not.

The 24 Kbytes of SRAM supports the frame buffer that the external bus is there to serve only if the buffer is small. A 128 by 64 monochrome buffer is 1 Kbyte and lives inside the part; a colour frame buffer lives in the external PSRAM, and the internal SRAM then holds the line buffers and the descriptors. Planning which buffer goes where is what keeps the bus bandwidth from becoming the limit on the display refresh rate.

At 40 C/W on the LQFP100 package the junction rises 20 C above an 85 C ambient at about 500 mW. On a board with a parallel bus the switching current is spread over many pins at once, so the I/O contribution to that figure is larger than on a serial only board. The ground return under the bus and the decoupling on each supply pin are what keep the analog side of the part out of the noise the bus generates.

Flash endurance of 10 kcycles at minus 40 to plus 85 C and 30 years of retention at 85 C after one kcycle applies to this code as to the rest of the line. Because 256 Kbytes leaves room for two 128 Kbyte slots, a field update scheme that writes the inactive slot and then switches is practical, and it is the arrangement that writes the most to Flash. Counting those writes against the endurance figure is part of the reliability calculation, not an afterthought.

The 24 MHz ceiling is the constraint that has to be checked against the display and the bus rather than against the control loop. Driving a parallel bus at 24 MHz with wait states leaves a few million transfers a second, which is enough for a small panel refreshed occasionally and not for video. Work that needs more is a different family, and the pin compatibility ends at the package outline rather than at the pin out.

Where this order code fits

It is the 256 Kbyte, 100 pin value line part with the external memory controller and the internal letter, used where a board already qualified against that revision needs the parallel bus and 80 I/O. Boards comparing it against a neighbouring memory size or pin count start from our MCU Cross Reference page, and boards replacing a line that has gone end of life start from the Strategic Sourcing page. Both list the figures that have to match before a substitute goes on a BOM.

Questions buyers ask

How does this differ from STM32F100VCT6? Only the internal letter in the orderable string. Memory, package, pin count, converter channels, interface set and the external memory controller are identical, and both are covered by DS5944 Rev 11. A substitution between them is a paperwork change and should be recorded as one.

How many chip selects does the memory controller provide on 100 pins? One usable bank, bank 1, on the LQFP100 package, driving a multiplexed NOR or PSRAM device. The additional bank and chip selects are available on the 144 pin body of the same family.

Can this part drive a 320 by 240 colour display? Not with an internal frame buffer, because 24 Kbytes cannot hold one at 16 bits per pixel. It can drive such a panel through a controller that has its own memory, with the part sending commands and data over the parallel bus or over SPI.

SUPERB holds and sources ST microcontroller lines including this order code for production and repair demand, quoted against the exact ordering string with date codes and packing stated. When a line is changing, the Pin to Pin Cross Reference page sets out the checks that keep a substitute from failing on the bench.