AT32 MCUs for Flight Controller and Motor Control Boards
Product Specifications
Product Overview
Flight controller and motor control boards are built around one or two microcontrollers, and the shortage of those parts is what stops a build. When the mainstream family is quoted at 30 weeks or the exact order code goes obsolete, the board still has to ship. The usual answer is a Cortex-M4F part with the same peripheral set, an advanced timer that can drive a three-phase bridge, fast ADCs for current sampling, and a package that fits the existing land pattern.
The AT32 family on this page is built exactly for that position. The mainstream line runs a Cortex-M4F core at 240 MHz with 256 KB to 1024 KB of flash and 96 plus 128 KB of SRAM, three 12-bit ADCs at 2 MSPS, up to two CAN interfaces, USB full speed and a motor control timer pair with dead time generation and an emergency brake input. The high performance line goes to 288 MHz with up to 4032 KB of flash, a configurable 384 KB to 512 KB of SRAM, three 5.33 MSPS ADCs, dual QSPI, an SDRAM controller and, on the AT32F437 parts, a 10/100 Ethernet MAC with IEEE 1588 hardware support.
For smaller boards the value line covers 120 MHz with 64 KB of flash and 16 KB of SRAM from 2.4 V to 3.6 V, and the 150 MHz parts cover 64 KB to 256 KB of flash with CAN and USB. The automotive grade AT32A423 devices run 150 MHz with up to 256 KB of flash and 48 KB of SRAM in QFN32 to LQFP48 packages. Every part on the page works from 2.6 V to 3.6 V with 5 V tolerant inputs, is guaranteed from -40 C to +105 C, and carries the sLib protected code area so a customer firmware block stays read protected in the field.
Key Specifications
| Parameter | Mainstream AT32F403A | High Performance AT32F435 and AT32F437 |
|---|---|---|
| Core | Cortex-M4F with FPU and DSP, 240 MHz maximum | Cortex-M4F with FPU and DSP, 288 MHz maximum |
| Flash | 256 KB to 1024 KB, zero wait state up to 240 MHz | 256 KB to 4032 KB, zero wait state up to 288 MHz |
| SRAM | 96 plus 128 KB, configurable | 384 KB default, configurable to 512 KB |
| ADC | 3 x 12-bit at 2 MSPS, up to 16 channels | 3 x 12-bit at 5.33 MSPS |
| CAN | Up to 2 x CAN 2.0B active | Up to 2 x CAN |
| USB | USB 2.0 full speed, crystal-less capable | 2 x OTG, crystal-less in device mode |
| External memory | XMC with 16-bit data bus, SPI flash up to 16 MB | XMC with 16-bit bus for SDRAM, SRAM, PSRAM, NAND and NOR, plus 2 x QSPI |
| Motor control timer | 2 x 16-bit advanced timer with dead time and brake input | 3 x advanced timers with dead time and brake input |
| Supply and temperature | 2.6 V to 3.6 V, -40 C to +105 C | 2.6 V to 3.6 V, -40 C to +105 C |
| Packages | QFN48, LQFP48, LQFP64, LQFP100 | QFN48, LQFP48, LQFP64, LQFP100, LQFP144 |
Included Models and Order Codes
The table lists the order codes most often requested for controller and motor boards. Send the complete order code including the package letter and the temperature suffix, and we confirm availability against that exact string rather than against the family name.
| Order Code | Core and Speed | Flash | SRAM | Key Peripherals | Package |
|---|---|---|---|---|---|
| AT32F403ACGT7 | Cortex-M4F, 240 MHz | 1024 KB | 96 plus 128 KB | 3 x 12-bit ADC, 2 x CAN, USB FS, XMC | LQFP48 |
| AT32F403AVGT7 | Cortex-M4F, 240 MHz | 1024 KB | 96 plus 128 KB | 3 x 12-bit ADC, 2 x CAN, USB FS, XMC | LQFP100 |
| AT32F403ARGT7 | Cortex-M4F, 240 MHz | 1024 KB | 96 plus 128 KB | 3 x 12-bit ADC, 2 x CAN, USB FS, XMC | LQFP64 |
| AT32F403ACGU7 | Cortex-M4F, 240 MHz | 1024 KB | 96 plus 128 KB | 3 x 12-bit ADC, 2 x CAN, USB FS | QFN48 |
| AT32F403ACET7 | Cortex-M4F, 240 MHz | 512 KB | 96 plus 128 KB | 3 x 12-bit ADC, 2 x CAN, USB FS | LQFP48 |
| AT32F403AVET7 | Cortex-M4F, 240 MHz | 512 KB | 96 plus 128 KB | 3 x 12-bit ADC, 2 x CAN, USB FS | LQFP100 |
| AT32F403ACCT7 | Cortex-M4F, 240 MHz | 256 KB | 96 plus 128 KB | 3 x 12-bit ADC, 2 x CAN, USB FS | LQFP48 |
| AT32F403AVCT7 | Cortex-M4F, 240 MHz | 256 KB | 96 plus 128 KB | 3 x 12-bit ADC, 2 x CAN, USB FS | LQFP100 |
| AT32F435CCT7 | Cortex-M4F, 288 MHz | 256 KB | 384 KB, to 512 KB | 3 x 5.33 MSPS ADC, 2 x QSPI, 2 x OTG | LQFP48 |
| AT32F435VCT7 | Cortex-M4F, 288 MHz | 256 KB | 384 KB, to 512 KB | 3 x 5.33 MSPS ADC, 2 x QSPI, 2 x OTG | LQFP100 |
| AT32F435ZDT7 | Cortex-M4F, 288 MHz | 448 KB | 384 KB, to 512 KB | XMC, SDRAM, 2 x QSPI, DVP | LQFP144 |
| AT32F435VDT7 | Cortex-M4F, 288 MHz | 448 KB | 384 KB, to 512 KB | XMC, SDRAM, 2 x QSPI, DVP | LQFP100 |
| AT32F435CDT7 | Cortex-M4F, 288 MHz | 448 KB | 384 KB, to 512 KB | XMC, 2 x QSPI, DVP | LQFP48 |
| AT32F437VGT7 | Cortex-M4F, 288 MHz | 1024 KB | 384 KB, to 512 KB | 10/100 EMAC with IEEE 1588, 2 x QSPI | LQFP100 |
| AT32F437ZMT7 | Cortex-M4F, 288 MHz | 4032 KB | 384 KB, to 512 KB | 10/100 EMAC, SDRAM, 2 x QSPI, DVP | LQFP144 |
| AT32F415CCT7 | Cortex-M4F, 150 MHz | 256 KB | 32 KB | CAN, USB OTG FS, 2 x USART | LQFP48 |
| AT32F415CBT7 | Cortex-M4F, 150 MHz | 128 KB | 32 KB | CAN, USB OTG FS, 2 x USART | LQFP48 |
| AT32F415K8U7-4 | Cortex-M4F, 150 MHz | 64 KB | 32 KB | CAN, USB OTG FS | QFN32 |
| AT32F421K6T7 | Cortex-M4F, 120 MHz | 64 KB | 16 KB | 2 x USART, 2 x SPI and I2S, advanced timer | LQFP32 |
| AT32A423CCT7 | Cortex-M4F, 150 MHz | 256 KB | 48 KB | 2 x CAN, USB FS, 3 x ADC, automotive grade | LQFP48 |
Key Features
FPU and DSP at 240 MHz and above – single precision floating point and full DSP instructions, so field oriented control, sensorless estimation and filtering run without an external math accelerator
Advanced timers built for a three-phase bridge – dead time generation, emergency brake input and complementary outputs, which is what a motor stage needs before the gate driver is even chosen
Zero wait state flash access – the mainstream and high performance lines execute from flash at full speed up to 240 MHz and 288 MHz respectively, so current loop timing is predictable
5 V tolerant IO and industrial temperature – inputs accept 5 V logic and the die is guaranteed from -40 C to +105 C, which covers industrial and outdoor enclosures without a level shifter
sLib protected code area – any part of the flash can be configured as a code executable but non readable library area, useful when a control algorithm has to stay protected on a customer board
Migration and pin compatible options – the 403A line replaces the earlier 403 generation at 240 MHz, and the F435 and F437 share package footprints so a design can be moved between densities and into the Ethernet variant
Applications
The parts are supplied for the boards below. Controller and motor boards are normally quoted as one item covering the MCU, the memory, the interface parts and the SUPERB PCB and SUPERB PCBA work we support for the same board.
Flight controller boards – attitude estimation, mixer output, CAN or UART links to the ESC stage and data logging on one 240 MHz part
FOC and BLDC motor control – field oriented control loops with three-phase PWM, current sampling on three ADCs and dead time insertion from the advanced timers
Industrial and telecom controllers – gateways and line cards needing Ethernet, CAN, USB and more than 1 MB of flash on the 288 MHz F437 parts
Sourcing and Cross-Reference
The problem with these parts is rarely the catalogue, it is the exact order code. A board that was qualified on a specific flash density, package and temperature suffix cannot take a different one without rework, so the useful information is availability by complete order code, batch and date code, not a family name.
We hold and source AT32 order codes against the exact string, and where a density or package is out, we quote the nearest option that keeps the same peripheral set and the same footprint, with the difference stated in writing before the order is placed. Long lead time quantities can be scheduled against a production date instead of being bought on the spot market.
Where the boards are built in volume, SUPERB Assembly support covers the SMT build of the control section.
Q: Can you supply pin-to-pin replacements for discontinued parts?
A: Yes. Send the complete order code and the quantity and the SUPERB Tech sales team will confirm availability and the nearest part that keeps the same pinout and peripheral set.
Why Buy From Us
- Order code level confirmation: availability is checked against the complete order code including package and temperature suffix, not against the family
- Cross reference before substitution: the nearest option in the same footprint is quoted with the peripheral and memory difference stated in writing
- Batch and date code on request: batch information and date codes are provided with the quotation for traceability on qualified boards
- One line for the control section: the MCU, the memory, the interface parts and the power rails quoted together so the controller BOM does not become three separate purchases
Related Product Families
This page is part of the component range we supply for industrial, telecom, medical and defence builds. Continue with: MCU and Embedded Processors, Ethernet PHY and Switch Chips for Industrial Networking, SPI NOR Flash Memory Chips for Embedded Firmware Storage, Pin to Pin Cross Reference.