ISO122U/1K
Product Specifications
ISO122U/1K
Texas Instruments — Power Management & Signal Chain
Product Overview
The ISO122U/1K from Texas Instruments is a power management / signal chain IC delivering high efficiency, precision regulation, and robust protection. Texas Instruments (TI) is a global leader in analog ICs, power management solutions, and embedded processors.
Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.
Key Features
- High-efficiency power conversion with low quiescent current
- Wide input voltage range with precision output regulation
- Integrated over-current, over-temperature, and short-circuit protection
- Small footprint packaging for space-constrained designs
- AEC-Q100 qualified options available for automotive applications
- Flexible sequencing and soft-start control
Key Specifications
| Input Voltage | V |
| Output Voltage | V |
| Output Current | A |
| Switching Frequency | kHz |
| Efficiency | % |
| Quiescent Current | µA |
| Topology | — |
| Package | — |
| Operating Temp | °C |
| Protection | — |
Applications
Request Quote — In Stock, 100% New & Original, Full Warranty
ISO122U/1K: a precision isolation amplifier with a capacitive barrier
The ISO122U/1K is a unity gain isolation amplifier that passes an analogue signal across a galvanic barrier. The signal is converted to a duty cycle, transmitted across a 2 pF differential capacitive barrier embedded in the plastic body, and reconstructed on the other side. Because the information crosses as a digital modulation rather than as an analogue level, the barrier characteristics do not enter the accuracy budget, which is why the part holds 0.020 per cent maximum nonlinearity over its range.
The barrier is rated 1500 Vrms and every unit is tested for breakdown. Common mode rejection is 140 dB at 60 Hz, so a 60 Hz mains difference between the two grounds does not appear at the output. The output is bipolar, plus or minus 10 V, the supply range is 4.5 V to 18 V on each side, and the two sides draw 5 mA and 5.5 mA of quiescent current respectively.
Key data for the ISO122U/1K
| Function | Unity gain isolation amplifier, bipolar plus or minus 10 V output, no external components required |
| Isolation | 1500 Vrms rated, 100 per cent tested for high voltage breakdown |
| Accuracy | 0.020 per cent maximum nonlinearity, 200 uV per C of offset drift |
| Bandwidth | 50 kHz signal bandwidth, with 140 dB common mode rejection at 60 Hz |
| Supply | 4.5 V to 18 V on each side, 5 mA and 5.5 mA quiescent |
| Barrier | Duty cycle modulation across a 2 pF differential capacitive barrier inside the package |
Body, marking and reel data
| Body | SOIC DVA, the surface mount body, with a 16 pin PDIP option in the same family |
| Reel | The 1K row is the thousand piece option, and the row itself prints no quantity in the orderable column |
| Marking | ISO 122JU printed on the body |
| Handling | Moisture level 3, 260 C peak, 168 hour floor life, so the bake clock starts when the seal is broken |
| Temperature | Minus 25 C to 85 C, which is narrower than an industrial grade part |
Where an analogue isolator still beats a digital one
A thermocouple, an RTD bridge, a 4 mA to 20 mA loop or a shunt in a motor drive produces a small analogue signal sitting on a ground that is not the same as the controller ground. Digitising on the far side and isolating the digital bus is one answer, but it needs an ADC on the isolated side, a clean supply there and an isolated data path. The isolation amplifier sends the analogue value across in one part and keeps the converter on the controller side.
The other case is a signal that has to stay analogue, such as a setpoint fed into an SCR controller or a transducer in a 4 mA to 20 mA loop. Here the isolator is the only part in the path and its 50 kHz bandwidth is more than the loop needs.
Points to settle before ordering this code
The first is the order string. The orderable table prints ISO122JU/1K rather than ISO122U/1K, and the quantity column on that row is blank while the neighbouring rows print 20 pieces in a tube. A buyer should confirm the thousand piece option in writing rather than infer it from the suffix.
The second is the moisture level. Level 3 with a 168 hour floor life means a reel that has been open for more than a week needs a bake, and a small prototype build can easily exceed that window.
The third is the temperature range. Minus 25 C to 85 C is a commercial window, and an outdoor enclosure or a cold store application needs a different grade. The fourth is the supply: each side needs its own isolated rail, and the 4.5 V floor means a 3.3 V rail cannot supply either side directly.
Isolation amplifiers and the bake clock
This part is bought in modest quantities and stored for long periods, which makes the moisture level the practical issue. Level-3 with a 168 hour floor life means the reel has to be baked after a week in the open, and a workshop that opens a reel for one board and puts it back on the shelf is accumulating a problem. We quote the thousand piece option and note the bake requirement on the packing list.
The second issue is the order string. The orderable table prints the J prefixed form for the surface mount body, and the quantity column on that row is blank while the neighbouring rows print tube quantities. We confirm the thousand piece option in writing, and we record the date code so that a customer who has been holding stock for two years knows which reels need a bake before the next build.
Where the measurement chain runs into a medical instrument, the isolation context is on our medical device components page. Where the analogue front end has to be re sourced, the cross reference route is on our amplifier cross reference page.