Contact Us

VBQG4240

Brand: VBsemi
VBsemi VBQG4240 is a discrete semiconductors component designed for DC-DC Converters & Power Supplies and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

VBQG4240 — Discrete & Power Semiconductors | Superb Automation

VBQG4240

VBsemi — Discrete & Power Semiconductors

Product Overview

The VBQG4240 from VBsemi is a discrete power semiconductor delivering efficient switching and power conversion. VBsemi specializes in discrete MOSFETs, power transistors, and protection devices at competitive cost for power supplies, motor control, and consumer electronics.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • Low Rds(on) for minimal conduction losses in power switching
  • Fast switching speed with low gate charge for high-frequency operation
  • Avalanche-rated for robust operation under inductive load conditions
  • High junction temperature rating for demanding environments
  • Logic-level gate drive compatible for simplified design
  • RoHS and AEC-Q101 qualified options available

Key Specifications

Vds / VceV
Id / IcA
Rds(on) / Vce(sat)mΩ
QgnC
Technology—
Package—
Configuration—
Mounting—

Applications

Switch-Mode Power Supplies Motor Drives & Inverters Battery Management Systems DC-DC Converters Load Switching Automotive Power Distribution

Request Quote — In Stock, 100% New & Original, Full Warranty

VBQG4240: a dual P channel pair at minus 20 V in the 2 by 2 body

The VBQG4240 is a dual P channel MOSFET in the DFN 2 by 2 body, printed at minus 20 V with 40 milliohm at a minus 10 V gate and 45 milliohm at minus 4.5 V per channel, minus 5.3 A at a 25 C case per channel, 17 nC of gate charge per channel and a threshold window of minus 0.4 to minus 2 V. The data sheet names load switches as the application. Two independent P channels in one 2 mm square body are used where two rails have to be switched in the positive line and the control logic wants both switches within a few millimetres of each other.

The resistance figure is per channel, and that detail is the one most often missed when the part is compared against a single P channel. Two channels in one body do not share current and do not halve the resistance; they are two separate switches that happen to share a package and a thermal pad. At 2 A per channel the loss is 0.16 W per channel, and both channels heat the same pad, so the thermal calculation has to add them.

The sheet carries two package references that do not agree. The application block and the summary name the DFN 2 by 2, and the same page also prints a PowerPAK SC-70-6 dual outline with six pin numbers, which reads as a template residue from another data sheet rather than a second option for this code. The footprint should be confirmed with the vendor drawing before a board is tooled, because the two outlines are not interchangeable even though both are 2 mm class bodies.

Key data for the VBQG4240

ConfigurationDual P channel, independent
PackageDFN 2 by 2 with exposed pad
VDSMinus 20 V
VthMinus 0.4 to minus 2 V at 250 microamp
RDS(on) at minus 10 V40 milliohm per channel at minus 5.3 A
RDS(on) at minus 4.5 V45 milliohm per channel at minus 4.3 A
ID at a 25 C caseMinus 5.3 A per channel
Pulsed drain currentMinus 32 A
Power dissipation5.0 W at a 25 C case, 2.5 W at a 25 C ambient
Ciss1350 pF per channel
Gate charge17 nC typical per channel
Body diodeMinus 0.75 V at minus 2 A, 34 ns recovery typical
Recovered charge22 nC typical, 40 nC maximum
AvalancheMinus 20 A single pulse, 20 mJ at 0.1 mH
RthJA and RthJF38 and 20 K per watt typical, 50 and 25 maximum
Junction rangeMinus 55 to 150 C

The 1350 pF input capacitance per channel is large for a part with 17 nC of gate charge, and that combination says the die is wide rather than long, which is what a 2 by 2 dual body forces. It matters for the driver: two channels driven in parallel from one output see 2700 pF and 34 nC, and a logic output rated for 10 mA will take 3.4 microseconds to charge that, which is too slow for a switching converter and adequate for a load switch.

The power dissipation of 5.0 W at a 25 C case and 2.5 W at a 25 C ambient, against 38 K per watt junction to ambient, means the part is comfortable at 2 A per channel and marginal at 4 A. At 4 A and 45 milliohm the loss is 0.72 W per channel on a shared pad, so 1.44 W total, which against 38 K per watt is a 55 C rise and puts the junction at 80 C in a 25 C room. That is the number to check before a dual body is chosen over two singles.

Where a dual P channel is used

The first case is two sequential rails on a portable instrument, where a 3.3 V rail and a 1.8 V rail are switched on in order. Both channels sit in one body, the gate of each is pulled down by its own control line, and the sequencing is done in the controller rather than by an extra part. The thermal pad is shared, which is acceptable here because only one rail carries significant current at a time.

The second case is a battery to system switch with a reverse blocking channel in series. One channel carries the system current and the other blocks the charger path, and because both gates are driven together the two channels can be arranged so that no current flows from the charger into the pack when the pack is full. The 45 milliohm at 4.5 V sets the drop at 90 mV for a 2 A system load.

The third case is a USB port power switch with a separate discharge path. One channel feeds the port and the other discharges the port capacitance when the port is disabled, so the connector is safe to touch on the next insertion. The discharge channel works for a few milliseconds and sees the full capacitance energy, which the 20 mJ avalanche rating covers comfortably.

Matching, thermal coupling and gate drive

Two channels in one package share a thermal path but not a threshold. The window of minus 0.4 to minus 2 V is wide, so when the two channels are turned on together one may conduct first and take the whole inrush for a few microseconds. In a load switch with a large output capacitance the current can reach the 32 A pulsed rating, which is why the gate slew is set by a resistor and a capacitor rather than by the driver alone.

The junction to foot resistance of 20 K per watt typical is the number that decides whether a dual body works. The pad under both channels is the only path, and the copper area has to serve the sum of the two losses rather than one. A board that gives each channel its own island and no vias into a plane will run at 60 K per watt or worse, and the 2.5 A per channel figure becomes 1.5 A.

Where the code has to be compared with two single P channels in the same footprint, the BOM consolidation page covers how a family is merged onto fewer codes without losing a qualification. In this case the dual body saves one placement and one reel, and it costs a shared thermal pad and a wider threshold window, which is a trade a buyer should make consciously rather than by default.

What to check before this code is bought

The dual package reference on the sheet is the first thing to settle. The summary names the DFN 2 by 2 and the same page prints a PowerPAK SC-70-6 outline with six pins, so the land pattern has to come from the vendor drawing rather than from the data sheet. A board tooled from the wrong outline is an expensive way to find out which one is real.

The gate window is plus or minus 12 V on this family, so on a 12 V rail a gate pulled to ground sits exactly at the limit. On a two cell pack at 8.4 V there is margin. A zener from gate to source is cheap insurance and is standard practice on this body.

Where the part arrives in volume, the incoming inspection plan page covers what is checked on receipt, from the reel label and the lot code to a curve trace on a sample. A dual body with two different channels is the kind of part where a wrong reel shows up as one channel dead rather than as a short, so the sample check should test both channels, not one.

The sheet gives no moisture sensitivity level and no automotive qualification. A build that reflows this part twice, which happens on a double sided board, needs a moisture level and a bake rule, and without the document the safe assumption is level 3 with a 24 hour floor life.

Questions we get on this code

Is 40 milliohm the resistance of the pair? No, it is one channel. The two channels are independent switches, so the pair in parallel would be 20 milliohm only if both were wired together, which defeats the purpose of a dual part.

Can the two channels be used at 5 A each at the same time? Not continuously on one pad. The 5.0 W case figure is for the whole body and the pad is shared, so 2 A per channel is the practical continuous rating and 3 A only with a good thermal plane.

What is the part for if both channels are the same? Sequential rails, a switch plus a discharge path, and a battery path with reverse blocking. In all three one channel works at a time or one channel carries almost no current, which is why the shared pad is acceptable.

Does the body diode need a Schottky in parallel? Only where the circuit must conduct with the channel off. The diode drop is 0.75 V at 2 A, and a Schottky takes most of that away at the cost of a part and a leakage path.