Contact Us

VBP165R36SFD

Brand: VBsemi
VBsemi VBP165R36SFD is a discrete semiconductors component designed for DC-DC Converters & Power Supplies and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

VBP165R36SFD — Discrete & Power Semiconductors | Superb Automation

VBP165R36SFD

VBsemi — Discrete & Power Semiconductors

Product Overview

The VBP165R36SFD from VBsemi is a discrete power semiconductor delivering efficient switching and power conversion. VBsemi specializes in discrete MOSFETs, power transistors, and protection devices at competitive cost for power supplies, motor control, and consumer electronics.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • Low Rds(on) for minimal conduction losses in power switching
  • Fast switching speed with low gate charge for high-frequency operation
  • Avalanche-rated for robust operation under inductive load conditions
  • High junction temperature rating for demanding environments
  • Logic-level gate drive compatible for simplified design
  • RoHS and AEC-Q101 qualified options available

Key Specifications

Vds / VceV
Id / IcA
Rds(on) / Vce(sat)mΩ
QgnC
Technology—
Package—
Configuration—
Mounting—

Applications

Switch-Mode Power Supplies Motor Drives & Inverters Battery Management Systems DC-DC Converters Load Switching Automotive Power Distribution

Request Quote — In Stock, 100% New & Original, Full Warranty

VBP165R36SFD: 650 V and 36 A in a TO247 with 68 milliohm

The VBP165R36SFD is a single N channel MOSFET in a TO247 body, rated at 650 V drain to source, plus or minus 30 V on the gate, a 3.5 V threshold, 36 A of drain current and 68 milliohm at a 10 V gate. The vendor table lists a superjunction multiple epitaxy die. It shares its voltage, current and package with the 75 milliohm part and differs in the on resistance and in the FD suffix.

The FD suffix on this family is used for parts with a fast recovery body diode, which matters in a hard switched bridge. A superjunction die has a small body diode with a fast recovery, and the FD grade tightens the recovered charge further. In a bridge, the diode of the low side switch conducts the inductor current during the dead time and then recovers when the high side turns on. That recovery current adds to the turn on loss of the opposite switch, and at 100 kHz it can be a third of the total.

Sixty eight milliohm against 75 is a 9 percent difference in conduction loss, which is inside the tolerance band of most thermal calculations. The reason to pick this part over its neighbour is therefore the diode grade and the availability, not the resistance.

Key data for the VBP165R36SFD

ConfigurationSingle N channel
PackageTO247, through hole, tab on the drain
VDS650 V
VGSPlus or minus 30 V
Vth3.5 V typical
ID36 A
RDS(on) at 10 V68 milliohm
StructureSuperjunction, multiple epitaxy
Diode gradeFD, fast recovery body diode
Loss at 9 A5.5 W
Loss at 18 A22.0 W
Loss at 36 A88.1 W

The diode is the reason this grade exists

In a synchronous buck or a half bridge, the body diode conducts during the dead time. At 10 A and 1.2 V forward the diode makes 12 W during that interval, and at 100 ns dead time per cycle at 100 kHz the average is 0.24 W. The recovery is the larger term: a superjunction body diode that recovers 200 nC at 400 V and 10 A puts 0.4 W into the opposite switch per cycle at 100 kHz, and that loss lands in a die that is already hot.

The FD grade shortens the recovery and lowers the recovered charge. On a hard switched bridge at 100 kHz, the difference between a standard and a fast recovery body diode can be 3 to 5 W of total loss in a 1 kW stage, which is the difference between a plate heatsink and a finned one.

The grade does not help in a boost or a flyback, where the body diode never conducts. Buying it there is paying for a parameter that the circuit does not use, and the standard part is the better purchase if the price differs.

Loss budget at 1 kW

A 1 kW boost stage at 400 V draws 2.5 A average and 7 A peak. At 68 milliohm the peak conduction loss is 3.3 W and the root mean square figure over the line cycle is 3.2 A giving 0.7 W. Switching at 400 V and 7 A with a 20 ns crossover is 2.8 W peak, averaged to 1.2 W. Total 1.9 W, and a TO247 on a 1 K per watt heatsink sits at 55 C rise.

At 2 kW the peak current is 14 A, the root mean square 6.4 A, and the conduction loss 2.8 W. Switching loss doubles to 2.4 W averaged and the total is 5.2 W. That is still one part on a modest heatsink, and the second part only arrives at 3 kW.

The gate drive budget matters at these currents. If the die needs 35 nC per cycle at 100 kHz, the driver delivers 3.5 mA average and the gate loss at 12 V is 42 mW, which is nothing. The peak current during the transition is 1.2 A through a 10 ohm resistor, and that is what the driver has to source without dropping the gate voltage.

Where this part fits

Hard switched half bridges at 400 V, synchronous boost stages, LLC primaries where the diode grade is not needed but the low resistance is, and active power factor correction from 500 W to 2 kW. In a bridge, pair it with the same grade on both positions, because a fast diode against a slow one moves the recovery loss into one die.

In a battery charger with a 400 V link the part runs at 50 to 100 kHz and the switching loss is the larger term, so the gate resistor is the tuning element. A 4.7 ohm gate resistor and a short return path keeps the turn off under 30 ns without ringing the drain above 550 V.

For a board that already uses the 75 milliohm member of the family, the swap is electrically close and the qualifying work is a thermal check and an emissions check. The date code management page covers how mixed lots of two grades are kept apart on the line.

The sourcing side of this part is covered on the incoming inspection plan. For a diode graded part, that page covers what is measured on arrival so a mixed grade never reaches the line.

Questions we get on this code

Does the FD grade mean a co-packaged diode? No. The diode is the body diode of the MOSFET, graded for faster recovery. There is no second die in the package, and the third pin is still the source.

Is 68 milliohm measured at 25 C? The vendor table does not state the temperature. A superjunction die at 650 V typically rises 80 to 100 percent from 25 C to 125 C, so the hot resistance is nearer 125 milliohm and the loss calculation has to use that.

Can it replace the 75 milliohm part without a requalification? On a boost stage, usually yes with a thermal check. On a hard switched bridge, no, because the diode recovery changes the opposite switch loss.

What is the isolation voltage of the tab? The TO247 tab is the drain and is not isolated. A shared heatsink needs an insulating pad rated for the bus voltage plus margin, and the pad adds 0.3 to 0.5 K per watt.