HXC40034
Product Specifications
HXC40034
Hisiwell — Discrete & Power Semiconductors
Product Overview
The HXC40034 from Hisiwell is a discrete power semiconductor delivering efficient switching and power conversion. Hisiwell is a recognized semiconductor supplier providing reliable components for global electronics manufacturing.
Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.
Key Features
- Low Rds(on) for minimal conduction losses in power switching
- Fast switching speed with low gate charge for high-frequency operation
- Avalanche-rated for robust operation under inductive load conditions
- High junction temperature rating for demanding environments
- Logic-level gate drive compatible for simplified design
- RoHS and AEC-Q101 qualified options available
Key Specifications
| Vds / Vce | V |
| Id / Ic | A |
| Rds(on) / Vce(sat) | mΩ |
| Qg | nC |
| Technology | — |
| Package | — |
| Configuration | — |
| Mounting | — |
Applications
Request Quote — In Stock, 100% New & Original, Full Warranty
HXC40034: twenty five watts at 32 per cent at 7.7 to 8.5 GHz
The HXC40034 is the largest member of the 7.7 to 8.5 GHz group in the Hisiwell gallium arsenide internally matched family, and at 7 dB of gain it is the hardest part in the whole range to drive. The window is 799 MHz, 9.88 per cent fractional at an 8.1 GHz centre. The vendor states in-plane matching synthesis and thin film hybrid integration, with 50 ohm at both ports. The index row reads 7.7 to 8.5 GHz, saturation output not printed, output at 1 dB compression at least 44 dBm, gain at least 7 dB, drain efficiency at least 32 per cent, 10 V drain rail, plus or minus 0.8 dB flatness, continuous wave.
44 dBm at compression is 25.12 W. On 10 V the DC input is 78.50 W, the drain current 7.85 A and the heat 53.38 W. The drive is 5.01 W at 37 dBm, three decibels more than the 44 dBm member on the 6.4 to 7.2 GHz window needs for the same output, and that single figure changes the architecture of everything in front of it.
Twenty five watts at X band with 53.38 W of dissipation is a cold plate part. Nothing about it is unmanageable, but a line up built around the 41 dBm member cannot simply swap this in: the driver has to grow by three decibels and the thermal path has to change completely.
The parameter rows Hisiwell publishes for HXC40034
| Part class | Gallium arsenide internally matched power transistor |
| Matching technique, as stated by the vendor | In-plane matching synthesis, thin film hybrid integration |
| Frequency range | 7.7 to 8.5 GHz |
| Bandwidth, calculated | 799 MHz, 9.88 per cent fractional at an 8.1 GHz centre |
| Output at 1 dB compression as published | at least 44 dBm |
| Output at 1 dB compression in watts, calculated | 25.12 W |
| Saturation output power as published | not published, the index prints a slash in that column |
| Gain as published | at least 7 dB |
| Drain efficiency as published | at least 32 per cent |
| Drain voltage | 10 V |
| Input and output impedance, as stated by the vendor | 50 ohm at both ports |
| Flatness across the band | plus or minus 0.8 dB |
| Operating mode | continuous wave |
| Drive power for the compression point, calculated | 37 dBm, 5.01 W |
| DC input at compression, calculated | 78.50 W |
| Drain current at compression, calculated | 7.85 A at 10 V |
| Dissipation at compression, calculated | 53.38 W |
| Dissipation if efficiency reaches 50 per cent, calculated | 25.12 W |
| Output per 100 MHz of the band, calculated | 3.14 W |
| Load voltage at compression into 50 ohm, calculated | 35.44 V RMS, 50.12 V peak |
| Thermal resistance, junction to case | not published |
| Package outline and dimensions | not published in text, the product page carries one outline image |
| Scattering parameters | not published |
| Gate bias point and quiescent current | not published |
| Operating and storage temperature | not published |
| Orderable addendum, marking and packing | not published |
| Neighbour one step below at 41 dBm | HXC40033, 32 per cent, 3.93 A |
| Neighbour on the 6.4 to 7.2 GHz window at 44 dBm | HXC40030, 35 per cent, 7.18 A |
Five watts of drive is the real requirement
A 7 dB gain means the driver has to deliver 5.01 W at 37 dBm for this part to reach 25.12 W. The 41 dBm member of the same window, with 8 dB of gain, needs 2.00 W. That is a factor of 2.5 in driver power, and a driver that was sized for the 41 dBm part with one decibel of margin will be at compression or beyond when it feeds this one.
The usual answer is a three stage chain: a small gain block, the 36 or 39 dBm member as a driver, and this part as the final. That is what the 41 dBm member is for, and it turns the problem from one of drive into one of heat, since the driver stage now also dissipates.
The three stage chain also changes the gain distribution. With 7 dB at the final device, the stage in front of it has to supply 5.01 W and still be linear enough that its own distortion does not dominate. That usually means running the driver at 3 dB below its compression point and accepting the efficiency loss there, rather than pushing it to make up for the final stage.
At 32 per cent, 25.12 W of output costs 78.50 W of DC input and leaves 53.38 W of heat in the final stage alone. Add the driver and the total heat in the enclosure passes 65 W, which is where the cold plate stops being a convenience and becomes the mechanical starting point.
X band at twenty five watts in a real system
At this power the applications are radar transmitters, high capacity X band data links and the final stage of a gateway or a test amplifier. In all three the operating point is set by linearity and by thermal headroom rather than by the published output, and no linearity data is published at all.
In a radar the duty cycle is what makes the part usable: 25 W peak at a low duty gives an average dissipation far below 53.38 W, but the transient thermal impedance is not published, so the case temperature has to be measured over a burst. A continuous wave rating means the part can survive the worst case, not that it will run cool at it.
In a link the modulation sets the back off, and this part at 6 dB of back off delivers 6.3 W while still drawing about 70 W of DC input. The efficiency falls under 10 per cent and the heat stays near 50 W. As with the 41 dBm member, a backed off requirement is better served by a smaller part run at compression.
Mismatch at 25.12 W reflects about 2.8 W into the output at a 2 to 1 load. An isolator rated for 60 W forward with a 20 W load is appropriate at this power, and it protects both the final device and the driver behind it.
The top of the X band ladder
The 7.7 to 8.5 GHz group ends here: 36, 39, 41 and 44 dBm, with gain at 8, 8, 8 and 7 dB. This part is the only one in the group that needs a three stage chain, and it is the only one where the thermal stack drives the mechanical envelope instead of the other way round.
Across to the lower window, the 44 dBm member at 6.4 to 7.2 GHz does the same output with 9 dB of gain, 3.16 W of drive and 53.38 W of heat against 46.65 W. If the frequency plan allows the lower band, that part is the easier of the two in every respect. Our RF power transistor cross reference shows both rows side by side, and the guide to choosing an RF amplifier covers the three stage chain at this power.
Questions buyers ask before ordering HXC40034
Can the 41 dBm member drive this one? Only if it is run at compression with a very short interstage path. It delivers 12.59 W, which is 4 dB above the 5.01 W requirement, so there is margin, but the interstage filter and connector losses come off it and the driver runs hot at its own compression point.
Is 7 dB of gain enough for a two stage line up? No. A 34 dBm driver plus this part gives 41 dBm of overall gain behaviour but only 2 dB of drive margin, which is too thin across temperature and band. Three stages is the practical arrangement.
Does the part need a negative gate rail? The vendor table does not state the bias arrangement. Gallium arsenide depletion mode devices normally do, so plan for a negative supply and confirm on the first article.
How do we start? Send the output required, the modulation, the ambient at the base plate and the rail supply. We will confirm the family member that fits, quote from the current factory schedule and ship a sample with measured output, gain and efficiency across the band.