Contact Us

HXC40006

Brand: Hisiwell
Hisiwell HXC40006 is a discrete semiconductors component designed for DC-DC Converters & Power Supplies and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

HXC40006 — Discrete & Power Semiconductors | Superb Automation

HXC40006

Hisiwell — Discrete & Power Semiconductors

Product Overview

The HXC40006 from Hisiwell is a discrete power semiconductor delivering efficient switching and power conversion. Hisiwell is a recognized semiconductor supplier providing reliable components for global electronics manufacturing.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • Low Rds(on) for minimal conduction losses in power switching
  • Fast switching speed with low gate charge for high-frequency operation
  • Avalanche-rated for robust operation under inductive load conditions
  • High junction temperature rating for demanding environments
  • Logic-level gate drive compatible for simplified design
  • RoHS and AEC-Q101 qualified options available

Key Specifications

Vds / VceV
Id / IcA
Rds(on) / Vce(sat)mΩ
QgnC
Technology—
Package—
Configuration—
Mounting—

Applications

Switch-Mode Power Supplies Motor Drives & Inverters Battery Management Systems DC-DC Converters Load Switching Automotive Power Distribution

Request Quote — In Stock, 100% New & Original, Full Warranty

HXC40006: a 700 MHz window at 5 W on 2.7 to 3.4 GHz

The HXC40006 is a gallium arsenide internally matched power transistor covering 2.7 to 3.4 GHz. Hisiwell builds it with in-plane matching synthesis and thin film hybrid integration and specifies 50 ohm at both ports. The index row reads 2.7 to 3.4 GHz, saturation output at least 37 dBm, output at 1 dB compression not printed, gain at least 12 dB, drain efficiency at least 38 per cent, 10 V drain rail, plus or minus 0.8 dB flatness, continuous wave.

37 dBm is 5.01 W. This is the smallest member of the GaAs family in this batch and the widest by bandwidth: 700 MHz is 22.95 per cent fractional at a 3.05 GHz centre. A part that covers 2.7 to 3.4 GHz in one match is built for products that have to work across the S band radar and communication allocations without a band select network.

The output column is saturated rather than compressed, which is the opposite of the HXC40003 and HXC40004 in the same family. The compression column carries a slash. That means the 37 dBm figure belongs to the point where the gain has already fallen by more than a decibel, and the linear output is lower. For a system that needs 5 W of linear output the part has to be backed off, and the useful linear output is nearer 2 to 3 W.

The drive level is 25 dBm, which is 316 mW. Twelve decibels of gain is modest, and the drive for the saturated output is a small power stage rather than a gain block. In a three stage line the driver would be a 25 dBm part and the stage in front of that a 10 dBm gain block, which is a conventional arrangement for an S band transmitter.

The parameter rows Hisiwell publishes for HXC40006

Part classGallium arsenide internally matched power transistor
Matching technique, as stated by the vendorIn-plane matching synthesis, thin film hybrid integration
Frequency range2.7 to 3.4 GHz
Bandwidth, calculated700 MHz, 22.95 per cent fractional at a 3.05 GHz centre
Saturation output power as publishedat least 37 dBm
Saturation output power in watts, calculated5.01 W
Output at 1 dB compression as publishednot published, the index prints a slash in that column
Gain as publishedat least 12 dB
Drain efficiency as publishedat least 38 per cent
Drain voltage10 V
Input and output impedance50 ohm, matched
Flatness across the bandplus or minus 0.8 dB
Operating modecontinuous wave
Drive power for the saturated output, calculated25 dBm, 316 mW
DC input at saturation, calculated13.19 W
Drain current at saturation, calculated1.32 A at 10 V
Dissipation at saturation, calculated8.18 W
Dissipation if efficiency reaches 60 per cent, calculated3.34 W
Output per 100 MHz of the band, calculated0.716 W
Load voltage at saturation into 50 ohm, calculated15.83 V RMS, 22.39 V peak
Estimated linear output at 6 dB back off, calculated1.26 W, 31 dBm
Thermal resistance, junction to casenot published
Package outline and dimensionsnot published in text
Scattering parametersnot published
Gate bias point and quiescent currentnot published
Operating and storage temperaturenot published
Orderable addendum, marking and packingnot published
Neighbour on the same rail at 42 dBm saturation on 3.1 to 3.5 GHzHXC40007, 10.5 dB gain

Twenty three per cent of bandwidth in a matched part

A 22.95 per cent fractional bandwidth is unusual for an internally matched transistor and it is achieved at the cost of output. Five watts from a part that covers 700 MHz is the trade against fifteen watts from a part that covers 200 MHz in the same family. The matching network is absorbing the difference, and the loss shows up as a lower compression point rather than as heat.

Wide bandwidth also changes the way the part is tested. A single frequency measurement at the centre says little about a part whose match is spread across 700 MHz, so the test record should carry output and gain at 2.75, 3.05 and 3.35 GHz at the minimum. A part that meets its figure in the middle and misses it at the edges is a part that will fail in the field at a channel the lab never visited.

The published flatness of plus or minus 0.8 dB is a useful promise across this width, and it is one of the few parts in the catalogue that publishes it. That figure is a band edge specification, so a system with a level control loop can plan around it and a system without one can budget it into the gain plan.

Harmonics are outside the matched band. The second harmonic of a 3 GHz signal is 6 GHz, well beyond the 3.4 GHz edge, and no harmonic figure is published. Systems with a strict spurious limit should plan an output filter, and the filter has to pass 2.7 to 3.4 GHz, which makes it a wideband low pass rather than a narrow band one.

Five watts at saturation and what it means for the waveform

A part quoted at saturation is a part quoted at the point of maximum output, and a modulated waveform cannot use that point. At six decibels of back off the output is 1.26 W and the efficiency falls to roughly half the saturation figure. That is the number a system running a shaped waveform actually gets, and it should be the number in the level plan.

For a constant envelope waveform the part can run near saturation and the 5 W figure applies. A radar pulse, a frequency hopping link or an FM telemetry transmitter all fall in that group, and they are the natural applications for a part whose efficiency is specified at the saturated point.

The 8.18 W of dissipation at saturation is modest and a small carrier handles it. On 3 C per watt the case rise is 25 C. The thermal question at this power level is not the sink, it is the interface between the flange and the carrier, and a thin layer of a filled interface material is enough if the surface is flat and the screws are torqued to the vendor's figure, which the vendor does not publish.

The current is 1.32 A at 10 V, which is a comfortable figure for a buck converter and for a small bias board. A part of this size can be biased from the same 10 V rail as the rest of an S band radio, which is a practical advantage over the higher current members of the family.

Where 2.7 to 3.4 GHz is used

S band between 2.7 and 3.4 GHz carries marine and ground radar, some satellite communication, telemetry for launch vehicles, and a range of industrial and scientific applications including microwave heating and plasma sources. A part covering 700 MHz serves a product family that has to address several of those windows with one board.

In radar the waveform is pulsed and the part runs near saturation. The 5 W figure is small for a radar transmitter and is typical of a short range or a portable set, where the antenna gain does the rest of the work. In a portable radar the 10 V rail is also an advantage, because the battery pack and the radio can share one converter.

In an industrial microwave source the load is often poorly matched and the part sees reflected power. A 5 W part with a circulator and a load can survive a 3:1 mismatch at reduced output, and the vendor publishes no mismatch tolerance, so the protection has to be external.

Our RF power transistor cross reference page sets out how we compare a saturated part with a compression rated part, and it explains why the two cannot be read off the same column.

Comparing HXC40006 with its neighbours

The HXC40007 covers 3.1 to 3.5 GHz at 42 dBm saturation with 10.5 dB of gain, which is five decibels more output and one and a half decibels less gain on a narrower window. The two overlap between 3.1 and 3.4 GHz, so a product that only needs the upper part of this band can use the stronger part and give up the lower channels.

The HXC40004 covers 2.0 to 2.2 GHz at 42 dBm compression with 11 dB of gain, which is a different window entirely. The HXNM40003 is a GaN part on 28 V covering 2.7 to 3.1 GHz at 36 dBm with 25 dB of gain, so it overlaps the bottom of this band with a much higher gain and a much lower output.

A GaN part with 25 dB of gain removes a driver stage, which matters when board area is scarce. A GaAs part with 12 dB of gain is simpler to stabilise and needs a lower rail. The choice is usually made by the supply and by the number of stages the mechanical envelope allows. Our one stop RF supply page explains how we hold both families and match a BOM against the rail that already exists.

Questions buyers ask before ordering HXC40006

Is 37 dBm saturation or compression? It is saturation. The compression column carries a slash. For a linear application the usable output is lower, and at six decibels of back off it is about 1.26 W.

Is there a data sheet? No. The vendor publishes an index row and a product page with the same electrical figures and the 50 ohm port impedance. There are no curves, no scattering parameters, no thermal data and no package drawing.

What has to be on the purchase order? The band, the 10 V rail, the continuous wave mode and the quantity. No orderable addendum, marking code or packing column is published, so reel size and moisture level come from the factory quotation.

How do we start? Send the band, the waveform, the output required and the rail. We will confirm the fit, quote from the current factory schedule and ship a sample with measured output and gain at 2.75, 3.05 and 3.35 GHz.