Contact Us

LT6203IMS8#TRPBF

Brand: Analog Devices
Analog Devices LT6203IMS8#TRPBF is a analog & mixed-signal component designed for Precision Instrumentation and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

LT6203IMS8#TRPBF — Analog & Mixed-Signal ICs | Superb Automation

LT6203IMS8#TRPBF

Analog Devices — Analog & Mixed-Signal ICs

Product Overview

The LT6203IMS8#TRPBF from Analog Devices is a high-performance analog / mixed-signal IC providing precision signal acquisition, conversion, and conditioning. Analog Devices (ADI) is a world leader in high-performance analog, mixed-signal, and DSP ICs for instrumentation, healthcare, automotive, and communications.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-resolution data conversion with excellent SNR and THD
  • Wide dynamic range and high linearity across operating conditions
  • Integrated voltage reference with low temperature drift
  • Flexible digital interface — SPI, I2C, or parallel options
  • Industrial/automotive temperature range with guaranteed specs
  • Low power consumption with power-down modes

Key Specifications

Resolutionbits
Channels—
Sample RatekSPS
Interface—
Supply VoltageV
Operating Temp°C
Package—
INLLSB
SNRdB
THDdB

Applications

Precision Instrumentation Industrial Process Control Medical Imaging & Diagnostics Automotive Sensor Interfaces Communications Infrastructure Test & Measurement

LT6203IMS8#TRPBF: 1.9 nV Noise Only Helps When the Source Is Low

The LT6203 is the dual member of a low noise, rail to rail input and output op amp family with 1.9 nV per root Hz voltage noise, 100 MHz gain bandwidth and 3 mA per amplifier maximum supply current. The headline that sells it is the noise density. The number that decides whether it works in a given stage is the 500 uV maximum offset and the 30 mA minimum output current, because both are what a 16 bit acquisition channel actually sees.

Reading the noise and offset together

1.9 nV per root Hz integrated over a 100 kHz band is 601 nV RMS, and over a 1 MHz band it is 1.9 uV RMS. Against a 16 bit converter on a 5 V range, where one LSB is 76 uV, the noise is comfortable in either band; the 500 uV maximum offset is 6.6 LSB and that is the term that has to be trimmed or accepted. A stage that quotes only the noise density and forgets the offset will pass a noise test and fail an accuracy test.

Bandwidth behaves the way the gain bandwidth product says it should: 100 MHz at a gain of 1 is 10 MHz at a gain of 10. Slew rate is 25 V per us, which gives a full power bandwidth of about 3.98 MHz at 2 V peak to peak, so a 10 V peak to peak signal at 1 MHz is inside the small signal figure and outside the large signal one.

Supply, swing and load

Supplies run from 2.5 V to 12.6 V and the part is specified at 3 V, 5 V and plus and minus 5 V, so the same order code covers a 3.3 V rail and a plus and minus 5 V analogue front end. Input common mode includes both rails and the output swings rail to rail, with 30 mA minimum output current, which is enough to drive a 100 ohm load to 3 V. Distortion is better than minus 80 dBc at 1 MHz, and common mode rejection is 90 dB typical. The IMS8 order code is the industrial grade in the 8 lead MSOP.

Channelsdual, single and quad members in the same family
Voltage noise1.9 nV per root Hz at 100 kHz
Current noise1.1 pA per root Hz
Gain bandwidth100 MHz, unity gain stable
Slew rate25 V per us
Offset voltage500 uV maximum
Supply current3 mA per amplifier maximum, 2.5 mA typical
Supply range2.5 V to 12.6 V, specified at 3 V, 5 V, plus and minus 5 V
Outputrail to rail, 30 mA minimum
Distortion and rejectionminus 80 dBc at 1 MHz, 90 dB typical common mode rejection
Temperature and packageminus 40 to 85 C, 8 lead MSOP or SO, DFN option

Where it fits

Transducer front ends where the source impedance is low: piezoelectric receivers, photodiode transimpedance stages after the first stage, active filters ahead of a 16 bit converter, and buffer stages that must drive a switched capacitor input without droop. The 1.9 nV figure is worth paying for only when the source resistance is under a few kilo ohms; above that the resistor noise dominates and a slower, cheaper amplifier with the same offset gives the same result.

Order code and availability

The TRPBF suffix is tape and reel in the MSOP body, and the quad LT6204 and single LT6202 share the same process, so a channel count change does not change the noise or the offset budget. Full family coverage sits in the analogue and mixed signal line card.

Common questions

Is 3 mA per amplifier a problem in a battery product? For two channels that is 6 mA continuous, which is far above what a coin cell can carry. In a mains powered instrument it is not a term; in a portable it rules the part out and the micropower family is the right comparison.

Can it run from a single 3.3 V rail and still pass a 2 V peak to peak signal? Yes, the output swings rail to rail and the input common mode includes both rails, so a 2 V peak to peak signal centred at 1.65 V stays inside on a 3.3 V supply.

Comparisons for the same socket are on the amplifier cross reference page, and the medical front end cases are on the medical device components page.

Request Quote — In Stock, 100% New & Original, Full Warranty