Contact Us

ADG619BRMZ

Brand: Analog Devices
Analog Devices ADG619BRMZ is a analog & mixed-signal component designed for Instrumentation and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

ADG619BRMZ — Analog & Mixed-Signal ICs | Superb Automation

ADG619BRMZ

Analog Devices — Analog & Mixed-Signal ICs

Product Overview

The ADG619BRMZ from Analog Devices is a high-performance analog / mixed-signal IC providing precision signal acquisition, conversion, and conditioning. Analog Devices (ADI) is a world leader in high-performance analog, mixed-signal, and DSP ICs for instrumentation, healthcare, automotive, and communications.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-resolution data conversion with excellent SNR and THD
  • Wide dynamic range and high linearity across operating conditions
  • Integrated voltage reference with low temperature drift
  • Flexible digital interface — SPI, I2C, or parallel options
  • Industrial/automotive temperature range with guaranteed specs
  • Low power consumption with power-down modes

Key Specifications

Resolutionbits
Channels—
Sample RatekSPS
Interface—
Supply VoltageV
Operating Temp°C
Package—
INLLSB
SNRdB
THDdB

Applications

Precision Instrumentation Industrial Process Control Medical Imaging & Diagnostics Automotive Sensor Interfaces Communications Infrastructure Test & Measurement

Request Quote — In Stock, 100% New & Original, Full Warranty

ADG619BRMZ: 4 ohm SPDT switch in an 8-lead MSOP

The ADG619BRMZ is a single pole double throw switch with a 4 ohm typical on resistance, matched to within 0.7 ohm between the two throws. It runs from a 2.7 V to 5.5 V single supply or a plus or minus 2.7 V to plus or minus 5.5 V split supply, passes a signal over the full rail to rail range, and switches with break before make action. The RM suffix is the 8-lead MSOP body; the same die is also offered in an 8-lead SOT-23.

Published values

ParameterValue
Configurationsingle pole double throw
On resistance4 ohm typical, 6.6 ohm maximum
On resistance flatness0.8 ohm maximum
Match between channels0.7 ohm typical
Supply range2.7 V to 5.5 V single, plus or minus 2.7 V to plus or minus 5.5 V dual
Analog signal rangerail to rail
Control logicTTL and CMOS compatible
Switching actionbreak before make
Packages8-lead MSOP and 8-lead SOT-23

A changeover is not two switches

An SPDT part replaces two single switches and the logic that keeps them from overlapping. The throw that is not selected is disconnected, and the break before make action means the selected throw is released before the other is engaged. Two separate switches driven from one control line would do the same job only if the board also guaranteed the timing, which is what the part removes.

The 0.7 ohm match between the two throws is what makes the part usable as a gain selector: if the two paths differed by an ohm, switching between them would change the gain by more than the resistors around them. At 4 ohm into a 1 kohm load the switch is 0.4 percent, so the match term is a tenth of that.

Rail to rail on a low supply

The switch passes signals from the negative rail to the positive rail, so a 0 to 3.3 V sensor signal needs no bias network. The 2.7 V minimum supply is what allows the part to run from the same rail as a 3.3 V processor, and the plus or minus 2.7 V to plus or minus 5.5 V dual range covers an audio signal that is referenced to ground.

On resistance rises as the supply falls: the 4 ohm figure is a 5 V number, and the same switch at 3 V is higher. A channel that is specified at 5 V and then run at 3.3 V has to be re-checked, because the gain error it contributes scales with the on resistance.

The 8-lead body and what it replaces

An 8-lead MSOP is 3 mm by 3 mm, which is the same area as a relay driver plus two switches. That is the trade the part makes: a solid state changeover with no moving parts, no contact bounce and no wear, in the footprint of a single small package. The SOT-23 version is smaller again for a board that has the height but not the area.

The control input is TTL and CMOS compatible, so a 1.8 V processor can drive a switch that passes a plus or minus 5 V signal. That level translation is part of the value: without it the board needs a level shifter and the propagation delay that comes with it.

For a board that has to keep running while a reel runs out, the obsolete part cross reference hub is where the family alternatives sit, how to verify a drop in replacement is the check list before a substitute goes in, and one stop BOM sourcing is how a gap is covered without a new line item.

Two questions buyers ask

Can the ADG619BRMZ be used as an audio mute? Yes, it is a changeover switch with break before make action and a flat on resistance, so it can route one of two sources or shunt a signal to ground. The switch resistance of 4 ohm has to be compared with the load it drives before it is used in a precision attenuator.

Does it work on a plus or minus 5 V supply? Yes, the dual range is plus or minus 2.7 V to plus or minus 5.5 V, and the signal can swing to both rails. The on resistance at that supply is the 4 ohm typical figure.