Contact Us

ADG5409BRUZ-REEL7

Brand: Analog Devices
Analog Devices ADG5409BRUZ-REEL7 is a analog & mixed-signal component designed for Precision Instrumentation and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

ADG5409BRUZ-REEL7 — Analog & Mixed-Signal ICs | Superb Automation

ADG5409BRUZ-REEL7

Analog Devices — Analog & Mixed-Signal ICs

Product Overview

The ADG5409BRUZ-REEL7 from Analog Devices is a high-performance analog / mixed-signal IC providing precision signal acquisition, conversion, and conditioning. Analog Devices (ADI) is a world leader in high-performance analog, mixed-signal, and DSP ICs for instrumentation, healthcare, automotive, and communications.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-resolution data conversion with excellent SNR and THD
  • Wide dynamic range and high linearity across operating conditions
  • Integrated voltage reference with low temperature drift
  • Flexible digital interface — SPI, I2C, or parallel options
  • Industrial/automotive temperature range with guaranteed specs
  • Low power consumption with power-down modes

Key Specifications

Resolutionbits
Channels—
Sample RatekSPS
Interface—
Supply VoltageV
Operating Temp°C
Package—
INLLSB
SNRdB
THDdB

Applications

Precision Instrumentation Industrial Process Control Medical Imaging & Diagnostics Automotive Sensor Interfaces Communications Infrastructure Test & Measurement

ADG5409BRUZ-REEL7: four differential channels into one pair

The ADG5409BRUZ-REEL7 is a four-channel differential multiplexer, which means it switches one of four differential inputs to a common differential output under a two-bit address, with an enable input that turns all channels off. On resistance is 13.5 ohm, the part is latch-up proof with an 8 kV human body model rating, dual supply covers plus or minus 9 V to plus or minus 22 V and single supply 9 V to 40 V with 48 V maximum ratings, and it is fully specified at plus or minus 15 V, plus or minus 20 V, 12 V and 36 V. The single-ended eight-channel member of the same family is the ADG5408. It is listed in the analog and mixed-signal IC line card with the rest of the switch range.

Differential or single ended is the first decision

The ADG5408 switches eight single-ended inputs to one output, and the ADG5409 switches four differential pairs. The pin count is the same, so the choice is made by what the front end needs:

QuantityADG5409Consequence
Channels4 differential8 input pins plus 2 output pins
Address2 bits, A0 and A1plus an enable line
On resistance13.5 ohm0.135 percent into 10 kohm
Same resistance into 1 kohm1.35 percent, larger than a 12-bit LSB
Fault behaviourlatch-up proof, 8 kV HBMno sequencing requirement
Suppliesplus or minus 9 V to plus or minus 22 V dual, 9 V to 40 V single48 V maximum ratings, not 48 V operation

A differential pair in front of a differential converter keeps the common mode of the source and the switch resistance appears in both legs, so the on resistance becomes a common-mode term rather than a gain term as long as the two legs match. That is the reason a 13.5 ohm part is usable in a bridge application where a 13.5 ohm single-ended switch would be a 1.35 percent gain error into 1 kohm.

Latch-up and the 48 V rating

The part is described as latch-up proof, and the 48 V figure is a maximum rating rather than an operating supply. A 48 V industrial bus therefore needs the dual-supply arrangement if the signal swings symmetrically, or a different part if the bus is single ended at 48 V. The 8 kV human body model rating is the highest in this group of switches and is the reason the part appears on front ends that connect to external wiring.

The enable input turns every channel off, which is how a scan can be parked between measurements without the multiplexer presenting a low impedance path from an unselected source to the output. That matters when the sources are sensors with different common-mode levels.

Selection notes

  • Two address lines and one enable line are the whole digital interface, so no serial bus and no configuration register are involved.
  • On-resistance flatness over the signal range is what determines distortion for a signal that uses the full supply range; the 13.5 ohm absolute value only scales the signal.
  • The BRUZ suffix is the TSSOP body. The LFCSP version has a different thermal path and a different land pattern, so a substitution changes the board.
  • The enhanced product version of this family covers -55 C to +125 C with a controlled baseline and a drawing number, which is the route for a defence or aerospace build that cannot accept the commercial temperature grade.

Questions buyers ask

Can it multiplex eight single-ended signals? No. Four differential channels use eight input pins; switching eight single-ended signals needs the ADG5408, which is the same family with a different internal arrangement.

Does the enable pin disconnect the output? It turns all channels off, so the output is no longer driven by any input, but the output node is not actively driven to a defined level. A pull-down or a following stage with a defined input bias is still needed.

What should a quote request include? The order code, the number of differential sources, the supply arrangement and the signal range, and the converter that follows the multiplexer. Send the BOM line to the converter cross reference when the multiplexer and the converter are being chosen together, and to the shortage and continuity desk when the part is already qualified and only availability is in question.

Request Quote — In Stock, 100% New & Original, Full Warranty