Contact Us

ADG5408BRUZ-REEL7

Brand: Analog Devices
Analog Devices ADG5408BRUZ-REEL7 is a analog & mixed-signal component designed for Precision Instrumentation and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

ADG5408BRUZ-REEL7 — Analog & Mixed-Signal ICs | Superb Automation

ADG5408BRUZ-REEL7

Analog Devices — Analog & Mixed-Signal ICs

Product Overview

The ADG5408BRUZ-REEL7 from Analog Devices is a high-performance analog / mixed-signal IC providing precision signal acquisition, conversion, and conditioning. Analog Devices (ADI) is a world leader in high-performance analog, mixed-signal, and DSP ICs for instrumentation, healthcare, automotive, and communications.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-resolution data conversion with excellent SNR and THD
  • Wide dynamic range and high linearity across operating conditions
  • Integrated voltage reference with low temperature drift
  • Flexible digital interface — SPI, I2C, or parallel options
  • Industrial/automotive temperature range with guaranteed specs
  • Low power consumption with power-down modes

Key Specifications

Resolutionbits
Channels—
Sample RatekSPS
Interface—
Supply VoltageV
Operating Temp°C
Package—
INLLSB
SNRdB
THDdB

Applications

Precision Instrumentation Industrial Process Control Medical Imaging & Diagnostics Automotive Sensor Interfaces Communications Infrastructure Test & Measurement

ADG5408BRUZ-REEL7: Latch-Up Proof 8 to 1 Multiplexer at 13.5 Ohm and 48 V

The ADG5408BRUZ-REEL7 is the TSSOP body of the ADG5408, an eight channel single ended multiplexer built on a trench isolated process that the vendor describes as latch-up proof, in production. It runs from plus or minus 9 V to plus or minus 22 V dual, or 9 V to 40 V single, with a 48 V maximum supply rating, an on resistance of 13.5 Ohm, 8 kV of human body model ESD, and full specification at plus or minus 15 V, plus or minus 20 V, 12 V and 36 V. The part has no logic supply pin, because the logic level is generated internally, which removes one rail from a board. Multiplexers with similar roles and pinouts are compared on the pin to pin cross reference page.

What the numbers actually mean

Thirteen and a half ohms against a 1 mA signal is 13.5 mV of drop, which is negligible; against a 10 kOhm load it is 0.13 percent of gain error, which is still small; against a 50 Ohm attenuator it is 27 percent, which is not usable. The multiplexer is a signal router for high impedance nodes and a switch for moderate currents, and the load it sees decides which of those it is. The 48 V maximum supply rating is what allows the part to survive an overvoltage on a channel that is connected to a field wiring terminal.

ParameterFigureWhat it decides in a build
Configuration8 to 1 single ended, three address linesEight field inputs into one converter channel
On resistance13.5 Ohm13.5 mV at 1 mA, 0.13 percent into 10 kOhm
SuppliesPlus or minus 9 to 22 V dual, 9 to 40 V singleOne part covers a bipolar analog rack and a 36 V industrial rail
Maximum rating48 V supplySurvives a field wiring fault without a clamp on every channel
Latch-upTrench isolation, dielectric barrierNo parasitic thyristor path to trigger under overvoltage
ESD8 kV human body modelHandles a board that is plugged in the field
Signal rangeRail to rail, both directionsBipolar signals pass without an offset

Where it can surprise a build

Latch-up proof is a process claim, not a licence to exceed the supply rating. The trench isolation removes the four layer path that latches a conventional CMOS switch, and the absolute maximum is still 48 V. A channel that sees 60 V from a field transient will damage the part, and the protection belongs on the connector, not in the assumption that the process survives anything.

The internal logic supply means the control pins are 3 V compatible and there is no VL pin to tie to the processor rail. It also means the digital input thresholds are fixed relative to the part's own supply, so a 3.3 V processor driving a part running at plus or minus 20 V still works, but the logic current has to come from somewhere and the data sheet quiescent figure includes it.

The eight to one configuration is single ended. A differential requirement needs the ADG5409, which is four differential channels in the same family and the same package options. The two are not interchangeable, and a board that assumed one for the other will find half the channels missing.

Applications and how it fits a data acquisition card

Analog input multiplexing on industrial data acquisition cards, automatic test equipment, relay replacement, and instrumentation that has to scan several sensors into one converter. The latch-up immunity and the 48 V rating are why this family appears on cards that connect to field wiring rather than only to another board. Where a card has to keep shipping while a specific order code is short, component lead time solutions covers qualifying an alternative multiplexer without losing the overvoltage behaviour.

The rest of the switch and multiplexer range is on the analog and mixed-signal IC page.

Questions buyers ask about this order code

Is the BRUZ-REEL7 body the TSSOP? Yes, and the family also offers an LFCSP body. The die is shared, so the difference is thermal and board area, plus the qualification of the automotive and enhanced product variants which carry their own order codes.

Does it need a separate logic supply? No. The on-chip generator produces the logic level from the analog supply, which is why there is no VL pin and why a 3.3 V microcontroller can drive it directly.

What happens when the enable pin is low? All channels switch off, which is a defined safe state for a scan that is being reconfigured. The transition is break before make, so two sources are never shorted together during a channel change.

Request Quote — In Stock, 100% New & Original, Full Warranty