AD8628ARZ
Product Specifications
AD8628ARZ
Analog Devices — Analog & Mixed-Signal ICs
Product Overview
The AD8628ARZ from Analog Devices is a high-performance analog / mixed-signal IC providing precision signal acquisition, conversion, and conditioning. Analog Devices (ADI) is a world leader in high-performance analog, mixed-signal, and DSP ICs for instrumentation, healthcare, automotive, and communications.
Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.
Key Features
- High-resolution data conversion with excellent SNR and THD
- Wide dynamic range and high linearity across operating conditions
- Integrated voltage reference with low temperature drift
- Flexible digital interface — SPI, I2C, or parallel options
- Industrial/automotive temperature range with guaranteed specs
- Low power consumption with power-down modes
Key Specifications
| Resolution | bits |
| Channels | — |
| Sample Rate | kSPS |
| Interface | — |
| Supply Voltage | V |
| Operating Temp | °C |
| Package | — |
| INL | LSB |
| SNR | dB |
| THD | dB |
Applications
Request Quote — In Stock, 100% New & Original, Full Warranty
AD8628ARZ: the zero drift single amplifier in an 8-lead SOIC body
The AD8628ARZ is the same auto-zero die as the 5-lead SOT-23 version in an 8-lead narrow SOIC_N package. The four extra pins are not connected, so the electrical behaviour is identical: 1 uV typical offset, 0.002 uV/C drift, 2.5 MHz, 1.1 mA maximum. The reason to choose it is mechanical and thermal, not electrical.
Published values
| Parameter | Value |
|---|---|
| Offset voltage | 1 uV typical, 5 uV maximum |
| Offset voltage drift | 0.002 uV/C typical, 0.02 uV/C maximum |
| Input bias current | 100 pA maximum |
| Supply current | 0.85 mA typical, 1.1 mA maximum |
| Gain bandwidth | 2.5 MHz at 5 V |
| Slew rate | 1.0 V/us |
| Voltage noise density | 22 nV/root Hz at 1 kHz |
| Overload recovery | 50 us |
| Output swing | 4.99 V minimum high into 100 k |
| Supply range | 2.7 V to 5.5 V single supply |
| Pinout | 8-lead SOIC_N with four unconnected pins |
| Thermal resistance | theta JA 158 C/W for the 8-lead SOIC_N |
Why an 8-lead package for a single amplifier
A 1.1 mA amplifier in a 5-lead SOT-23 is thermally fine, so the SOIC is not about heat. It is about the board: an 8-lead SOIC has 1.27 mm lead pitch and enough body length to hand probe, which matters on a prototype or a low volume instrument that is reworked by hand. The four unconnected pins also give room for a guard ring between the input pins and the supply pins without squeezing it into a 0.95 mm pitch row.
For a production board at volume the smaller package wins on area and on placement cost, and the electrical result is the same. The two order codes are interchangeable in behaviour, so a build can move between them without requalifying the analog chain and only the footprint changes.
Offset that does not move with temperature
Zero drift matters most where the board is hot. At 0.02 uV/C maximum over 165 C the drift is 3.3 uV, which is two thirds of the 5 uV offset itself. A conventional precision amplifier with 1 uV/C of drift would move 165 uV over the same range, which is 33 times more, and that is the difference between a channel that can be calibrated once and one that has to be re-zeroed.
The price is noise: 22 nV/root Hz is three to eight times the spot noise of a good bipolar precision amplifier. For a DC channel with a 10 Hz bandwidth that is 70 nV rms and irrelevant; for a channel that needs 100 kHz of bandwidth the noise is 7 uV rms and the offset advantage is spent.
Supply and decoupling
The part runs from 2.7 V to 5.5 V single supply and draws 1.1 mA maximum, so a 3.3 V rail at 1 mA is 3.6 mW. The auto-zero loop switches at an internal rate, so the supply pin needs a 0.1 uF capacitor within a few millimetres and a clean ground return; a long thin trace to the capacitor puts the switching current into the input reference and shows up as offset.
Where a customer needs a second position on this part, how to verify a drop in replacement is the starting point, the amplifier cross reference sets out the checks a substitution has to pass, and component lead time solutions is the short lead time route we quote against.
Two questions buyers ask
Is the AD8628ARZ drop in for the AD8628ARTZ? No. One is an 8-lead SOIC and the other a 5-lead SOT-23, so the footprints differ. The electrical limits are identical, which means a board change needs no change to the analog values around the part.
What happens on a 3.3 V rail? The gain bandwidth falls from 2.5 MHz at 5 V to 2 MHz at 2.7 V, so a 3.3 V board should use the lower figure. The offset and drift limits are unchanged across the supply range.