AD8628ARTZ-REEL7
Product Specifications
AD8628ARTZ-REEL7
Analog Devices — Analog & Mixed-Signal ICs
Product Overview
The AD8628ARTZ-REEL7 from Analog Devices is a high-performance analog / mixed-signal IC providing precision signal acquisition, conversion, and conditioning. Analog Devices (ADI) is a world leader in high-performance analog, mixed-signal, and DSP ICs for instrumentation, healthcare, automotive, and communications.
Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.
Key Features
- High-resolution data conversion with excellent SNR and THD
- Wide dynamic range and high linearity across operating conditions
- Integrated voltage reference with low temperature drift
- Flexible digital interface — SPI, I2C, or parallel options
- Industrial/automotive temperature range with guaranteed specs
- Low power consumption with power-down modes
Key Specifications
| Resolution | bits |
| Channels | — |
| Sample Rate | kSPS |
| Interface | — |
| Supply Voltage | V |
| Operating Temp | °C |
| Package | — |
| INL | LSB |
| SNR | dB |
| THD | dB |
Applications
AD8628ARTZ-REEL7: A One Microvolt Auto-Zero Amplifier, and Where the Bias Current Takes Over
The AD8628ARTZ-REEL7 is a zero drift, single supply, rail-to-rail input and output operational amplifier with a 1 uV offset voltage, a 0.002 uV per degree C offset drift, a 100 pA maximum input bias current and a 1.0 mA supply current. Gain, common mode rejection and supply rejection are all 130 dB, overload recovery is 50 us, no external components are needed for the auto-zero function, and the part is qualified for automotive applications. The family spans the single AD8628, the dual AD8629 and the quad AD8630. The order code reads A for the 8-lead SO, R for tape and reel and Z for the lead free finish.
One microvolt is smaller than the converter it usually feeds
At 5 V and 16 bits one LSB is 76 uV, so a 1 uV offset is 0.013 LSB and the amplifier is not the limiting element at that resolution. The drift is 0.002 uV per degree C, which is 0.25 uV over 125 degrees, a quarter of the offset itself. What that means in practice is that the offset can be treated as a constant, and a one point calibration holds over temperature, which is the whole reason an auto-zero amplifier is used instead of a trimmed bipolar part.
| Offset voltage | 1 uV, drift 0.002 uV per degree C, 0.25 uV over 125 degrees |
| Input bias current | 100 pA maximum |
| Rejection | 130 dB gain, common mode and supply |
| Supply current | 1.0 mA, 5 mW at 5 V, 8.8 Ah over a year |
| Input and output | Rail-to-rail both, single supply operation |
| Overload recovery | 50 us |
| External components | None required for the auto-zero function |
| Qualification | Automotive |
The bias current sets the source resistance ceiling
One hundred picoamps into 1 megohm is 0.1 mV, a hundred times the offset. At 10 megohm it is 1 mV, a thousand times the offset. An amplifier bought for its microvolt offset therefore loses that advantage above roughly 100 kohm of source resistance, and the crossover point is the number to check against the sensor rather than the offset figure. For a thermocouple, a shunt or a low impedance bridge the part is at its best; for a photodiode or a high value resistive sensor the bias current dominates and a different input stage is the right choice.
Five milliwatts of supply power is not a micropower figure, and 8.8 Ah over a year of continuous operation is larger than many battery products can fund. The part is for mains or automotive instruments where the offset matters more than the current. Where both matter, the family's lower power members and the trade between offset and supply current have to be compared directly.
Fifty microseconds of recovery is a real limit
An auto-zero amplifier that is driven into saturation takes time to come back, and 50 us is the published figure. At 250 kSPS a conversion takes 4 us, so a single overload event costs about 12 conversions, and a multiplexed channel that is overdriven on every scan loses a usable fraction of its throughput. The recovery time belongs in the same budget as the sampling rate, especially where an input can be disconnected while the amplifier is powered.
Two questions buyers ask
Does the auto-zero clock appear in the output?
The vendor describes this as the lowest noise auto-zero amplifier in the family, and the switching artefacts are the reason that claim is worth checking on a real board rather than in a catalogue. The clock is internal, so the only available control is the input filtering and the sampling instant.
Is the dual a drop-in for two singles?
No. The AD8629 is the dual in its own package, and it shares the electrical behaviour rather than the pinout. For a two channel board the dual is the smaller option, and the thermal path moves with the package.
No external components, and what that is worth
A chopper or auto-zero amplifier normally needs two capacitors to hold the offset during the sampling phase, and those capacitors bring their own leakage, their own tolerance and their own board area. This part needs none, which removes two lines from the bill of materials and, more importantly, removes the leakage path that a low bias current specification is trying to protect. In a circuit where 100 pA of bias current is the reason for choosing the part, a 1 nA leakage path through an external capacitor would defeat it entirely.
One hundred and thirty decibels of common mode rejection at a 5 V common mode is 1.58 uV referred to the input, which is comparable with the 1 uV offset. The two terms therefore matter equally in a high common mode application, and a board that budgets only the offset will be a factor of two optimistic. Supply rejection is the same figure, so a supply that moves by a volt moves the input referred error by a microvolt.
Ordering and supply
The AD8628ARTZ-REEL7 is the 8-lead SO, tape and reel, lead free code. The same base number appears in SOT-23 and in other grade and package combinations, so the package letter and the reel suffix both belong on the order line.
We hold and source this family for production and repair quantities. Start from the family page for analog mixed signal ICs, check a proposed alternative against the amplifier cross reference, and when a substitute is offered for an existing board, the drop in replacement check page lists the fields to compare before it is qualified.
Request Quote — In Stock, 100% New & Original, Full Warranty