AD8602ARZ-REEL7
Product Specifications
AD8602ARZ-REEL7
Analog Devices — Analog & Mixed-Signal ICs
Product Overview
The AD8602ARZ-REEL7 from Analog Devices is a high-performance analog / mixed-signal IC providing precision signal acquisition, conversion, and conditioning. Analog Devices (ADI) is a world leader in high-performance analog, mixed-signal, and DSP ICs for instrumentation, healthcare, automotive, and communications.
Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.
Key Features
- High-resolution data conversion with excellent SNR and THD
- Wide dynamic range and high linearity across operating conditions
- Integrated voltage reference with low temperature drift
- Flexible digital interface — SPI, I2C, or parallel options
- Industrial/automotive temperature range with guaranteed specs
- Low power consumption with power-down modes
Key Specifications
| Resolution | bits |
| Channels | — |
| Sample Rate | kSPS |
| Interface | — |
| Supply Voltage | V |
| Operating Temp | °C |
| Package | — |
| INL | LSB |
| SNR | dB |
| THD | dB |
Applications
AD8602ARZ-REEL7: a dual rail to rail op amp with a 500 microvolt offset limit
What this order code is
AD8602ARZ-REEL7 is a dual rail to rail input and output operational amplifier in an 8-lead SOIC, specified on a single supply from 2.7 V to 5.5 V. The offset voltage limit is 500 microvolts maximum, supply current is 750 microamps per amplifier, gain bandwidth is 8 MHz and slew rate is 5 volts per microsecond. The input and output both swing to the rails, which is what makes the part useful for buffering converters in a single supply system.
The family covers single, dual and quad in the same specification, and the D grades offer lower direct current precision at a lower price. Input bias current is very low, there is no phase reversal when the input is driven beyond the rails, and the part is unity gain stable. It is specified from minus 40 to plus 125 degrees C. The offset is achieved with a trimming technique the vendor applies at wafer level rather than with laser trimming, which is why the same die is offered at several grades.
Parameters as published
| Item | Value |
|---|---|
| Channels | dual, rail to rail input and output |
| Offset voltage | 500 microvolts maximum |
| Supply range | 2.7 V to 5.5 V single supply |
| Supply current | 750 microamps per amplifier |
| Gain bandwidth | 8 MHz |
| Slew rate | 5 V per microsecond |
| Input bias current | low, CMOS input |
| Phase reversal | none with the input beyond the rails |
| Stability | unity gain stable |
| Temperature range | minus 40 to plus 125 degrees C |
| Package | 8-lead SOIC, MSOP alternative |
| Grades | A grade as specified, D grade with lower dc precision |
Numbers that decide the application
Five hundred microvolts is 6.55 counts at 16 bits on a 5 V range, which is a reasonable offset for a 14 or 16 bit converter buffer and a large one for a 20 bit channel. The part's place is therefore in front of converters up to about 16 bits, where the offset can be calibrated out or ignored, and not in a precision instrumentation channel where a chopper amplifier is required.
Eight megahertz of gain bandwidth at a gain of 100 leaves 80 kHz of closed loop bandwidth, which is enough for a multiplexed 16 bit converter running at a few tens of kilohertz but not for one running at 250 kilohertz. The 5 volts per microsecond slew rate limits a 5 V peak to peak output to 318 kHz, so bandwidth and slew rate meet in a similar region and neither is the sole limit.
Seven hundred and fifty microamps per amplifier is 1.5 mA for the dual at 5 V, 7.5 mW, which is low enough for a battery instrument and high enough that a quad in the same family should be counted in the power budget. The rail to rail input means the common mode range includes both supplies, which is what allows a high side sense or a rail referenced signal without a separate supply.
Selection and cross reference notes
The grade is the first field: the A grade carries the 500 microvolt limit and the D grade trades direct current precision for price. A quotation that names only the family may deliver either. The second field is the body, since the same die is sold in MSOP and SOIC and the two are not interchangeable on a board.
Where a substitute is proposed, the offset limit, the supply range and the input structure have to match. A part with the same bandwidth and a rail to rail output but an input that stops a volt below the positive rail cannot replace this part in a high side sensing circuit, even though the summary tables look similar.
Where it fits
Buffering converters and references in single supply systems, active filters, integrators, shunt current sensing, high impedance sensor interfaces, portable instrument front ends and audio amplification at moderate fidelity. The rail to rail input and output is what allows a signal that swings over the whole supply to pass without clipping, and the low input current keeps the bias term small at high source impedance. Buyers comparing amplifiers can start at the amplifier cross reference page, and medical instrument builds usually reference the medical device components page.
Buying notes
ARZ is the 8-lead SOIC and REEL7 is the reel; the MSOP body carries a different suffix. Because the A and D grades share a datasheet and a package, the grade letter is the field that decides the offset, and the label is the check after the reel is opened.
Sourcing notes and next step
For a general purpose amplifier the practical questions are the grade, the body and the supply range on the board. We quote the exact code and confirm the grade before shipping. Send the codes and quantities through the BOM shortage recovery page and we will answer with availability and the grade actually on offer.
Request Quote — In Stock, 100% New & Original, Full Warranty