Contact Us

AD8495ARMZ-R7

Brand: Analog Devices
Analog Devices AD8495ARMZ-R7 is a analog & mixed-signal component designed for Instrumentation and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

AD8495ARMZ-R7 — Analog & Mixed-Signal ICs | Superb Automation

AD8495ARMZ-R7

Analog Devices — Analog & Mixed-Signal ICs

Product Overview

The AD8495ARMZ-R7 from Analog Devices is a high-performance analog / mixed-signal IC providing precision signal acquisition, conversion, and conditioning. Analog Devices (ADI) is a world leader in high-performance analog, mixed-signal, and DSP ICs for instrumentation, healthcare, automotive, and communications.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-resolution data conversion with excellent SNR and THD
  • Wide dynamic range and high linearity across operating conditions
  • Integrated voltage reference with low temperature drift
  • Flexible digital interface — SPI, I2C, or parallel options
  • Industrial/automotive temperature range with guaranteed specs
  • Low power consumption with power-down modes

Key Specifications

Resolutionbits
Channels—
Sample RatekSPS
Interface—
Supply VoltageV
Operating Temp°C
Package—
INLLSB
SNRdB
THDdB

Applications

Precision Instrumentation Industrial Process Control Medical Imaging & Diagnostics Automotive Sensor Interfaces Communications Infrastructure Test & Measurement

Request Quote — In Stock, 100% New & Original, Full Warranty

AD8495ARMZ: a K type thermocouple amplifier that outputs 5 millivolts per degree

The AD8495ARMZ is a thermocouple amplifier pretrimmed for a K type junction, with cold junction compensation on the die and a fixed transfer function of 5 mV per degree Celsius. A type K thermocouple connected to its inputs gives a voltage the part turns into a linear temperature signal without a second sensor and without firmware. Initial accuracy is 1 degree on the B grade and 3 on the A, the ambient rejection of the cold junction compensation is 0.025 degrees per degree, and the part draws 180 microamps from a 2.7 V to 36 V supply.

Published values

ParameterValue
Thermocouple typeK, pretrimmed; the same family covers J as the AD8494
Transfer function5 mV per degree Celsius
Initial accuracy1 degree on the B grade, 3 on the A
Ambient rejection0.025 degrees per degree typical, 0.05 maximum
Gain error0.1 percent typical, 0.3 maximum
Input rangefrom the negative rail minus 0.2 V to the positive rail minus 1.6 V
Overvoltage25 V beyond either supply without damage
Input bias current25 nA typical, 50 maximum
CMRR0.3 degrees per volt on B, 1 degree per volt on A
PSRR0.5 degrees per volt
Noise32 nV per root hertz at 1 kHz, 0.8 microvolts peak to peak from 0.1 to 10 Hz
Bandwidth25 kHz, settling 40 microseconds to 0.1 percent
Supply2.7 V to 36 V single, plus or minus 2.7 V to plus or minus 18 V
Quiescent current180 microamps typical, 250 maximum
Package8-lead MSOP

What the one degree accuracy does and does not include

The datasheet states plainly that the error figure excludes the thermocouple's own gain error and its nonlinearity. A type K junction is only linear to a few degrees over its full range, and the part amplifies that curve as if it were a straight 41 microvolts per degree. Between 0 and 100 degrees the deviation is small, and by 1000 degrees it is tens of degrees, so the 1 degree initial accuracy describes the electronics and nothing else.

What the part does remove is the cold junction problem. Without compensation, a 20 degree change in the connector temperature looks like a 20 degree change in the measurement. The 0.025 degrees per degree rejection turns that into 0.5 degrees, which is a 40 to 1 improvement achieved on the die rather than in firmware.

Bias current, source impedance and the error nobody expects

Twenty five nanoamps flowing out of a PNP input stage becomes a voltage across the thermocouple and its wiring. A 1 kohm loop gives 25 microvolts, which at 41 microvolts per degree is 0.6 degrees of error, and a 10 kohm loop gives 6 degrees. Thermocouple wire is low resistance but the connectors, the cold junction block and any filter resistors are not.

The bias current also drifts, and the input offset current of 1.5 nA matters when the two input impedances are not matched. A filter on one leg only is a common mistake and it converts bias current into differential offset. Matching the two legs, or using a 10 kohm resistor on both, is the standard fix.

Rail to rail output, and the headroom the input needs

The output swings from 25 mV above the negative rail to 100 mV below the positive one, so a 5 V supply covers roughly -5 to 1015 degrees for a 5 mV per degree slope around a 0 degree reference. The input needs 1.6 V of headroom below the positive rail, which is why the family is normally run at 5 V or above when the measurement goes past a few hundred degrees.

The reference pin allows the zero point to be shifted, either with a positive offset or from a negative supply, and it has a 60 kohm input resistance drawing 25 microamps. That pin is where a 0 degree output at 0 degrees Celsius is set, and it is also the place to inject a calibration offset when the thermocouple has been trimmed.

Buyers usually arrive at the amplifier cross reference to find the family alternatives, then use medical device components to confirm a substitute before it is fitted; OEM procurement is the routine for a part that has already stopped shipping.

Two questions buyers ask about the thermocouple amplifier

Does it work with a J type thermocouple? Not this code. The AD8494 in the same family is pretrimmed for type J, with a different transfer function, and the two are not interchangeable on a board that expects a calibrated output.

Can it detect a broken thermocouple? Yes. Thermocouple break detection is one of the listed features, and it works because an open input drives the amplifier to a rail in a predictable direction rather than leaving an undefined output.