Contact Us

AD8476ARMZ-R7

Brand: Analog Devices
Analog Devices AD8476ARMZ-R7 is a analog & mixed-signal component designed for Precision Instrumentation and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

AD8476ARMZ-R7 — Analog & Mixed-Signal ICs | Superb Automation

AD8476ARMZ-R7

Analog Devices — Analog & Mixed-Signal ICs

Product Overview

The AD8476ARMZ-R7 from Analog Devices is a high-performance analog / mixed-signal IC providing precision signal acquisition, conversion, and conditioning. Analog Devices (ADI) is a world leader in high-performance analog, mixed-signal, and DSP ICs for instrumentation, healthcare, automotive, and communications.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-resolution data conversion with excellent SNR and THD
  • Wide dynamic range and high linearity across operating conditions
  • Integrated voltage reference with low temperature drift
  • Flexible digital interface — SPI, I2C, or parallel options
  • Industrial/automotive temperature range with guaranteed specs
  • Low power consumption with power-down modes

Key Specifications

Resolutionbits
Channels—
Sample RatekSPS
Interface—
Supply VoltageV
Operating Temp°C
Package—
INLLSB
SNRdB
THDdB

Applications

Precision Instrumentation Industrial Process Control Medical Imaging & Diagnostics Automotive Sensor Interfaces Communications Infrastructure Test & Measurement

AD8476ARMZ-R7: 24 uV of Noise Against a 76 uV LSB

The AD8476ARMZ-R7 is a unity gain, fully differential amplifier and ADC driver from Analog Devices. The published summary gives 330 uA of supply current, fully differential or single ended inputs and outputs, a rail-to-rail output, a VOCM pin that sets the output common mode, overvoltage tolerance of 18 V beyond the supplies, the ability to drive a 16 bit converter up to 250 kSPS, 39 nV per root Hz of output noise, 1 ppm per degree C of gain drift, 200 uV maximum output offset, a 10 V per microsecond slew rate, 5 MHz of bandwidth, single supply operation from 3 V to 18 V or dual supplies from +/-1.5 V to +/-9 V, in an 8-lead MSOP.

What 39 nV buys at 250 kSPS

A single pole bandwidth of 250 kSPS has an effective noise bandwidth of 392.5 kHz, so the 39 nV density integrates to 24.4 uV rms at the output. On a 5 V differential range one 16 bit LSB is 76.3 uV, which makes the driver noise 0.32 LSB rms. Put against a full scale sine the same noise is 97.2 dB of signal to noise, which is within a dB of the 16 bit ideal. In other words the driver is not the part that limits a 16 bit, 250 kSPS acquisition, and the converter behind it is where the next dB has to come from.

Slew limits the amplitude long before 5 MHz does

At 5 MHz the 10 V per microsecond slew rate allows a peak of only 0.318 V, which is 0.64 V peak to peak. At 1 MHz it allows 1.59 V peak, and at 100 kHz 15.9 V peak, which is beyond any supply in the range. So the 5 MHz bandwidth is a small signal figure and the usable full scale frequency is nearer 500 kHz on a 5 V system. Anyone who budgets a 2 V peak to peak signal at 2 MHz with this driver is budgeting 1.27 V per microsecond against a 10 V per microsecond part only on paper: the real limit is the combination of slew and the load capacitance at the converter input.

Unity gain fixes where the gain has to live

The part is a gain of one stage, so scaling happens upstream in the sensor amplifier or downstream in the converter's reference. Its own errors are small but not zero: 200 uV of maximum output offset is 2.6 LSB at 16 bits on a 5 V range, and the 1 ppm per degree C gain drift over a 100 degree C swing is 500 uV of full scale movement, which is 6.6 LSB. Both are correctable in a calibration, and neither is correctable by buying a better converter.

VOCM and 18 V of overvoltage

The VOCM pin sets the output common mode independently of the input common mode, which is what lets a single ended sensor signal sit on a different reference from the converter. Overvoltage tolerance of 18 V beyond the supplies is the specification that matters in a hot plug or a fault condition: the driver survives an input that is well outside its own rails, which is why this part appears in front of precision converters in industrial front ends rather than only in signal chains that are well behaved.

Published figures

ParameterValue
FunctionUnity gain, fully differential amplifier and ADC driver
Supply current330 uA
Supply range3 V to 18 V single, +/-1.5 V to +/-9 V dual
Output noise39 nV per root Hz, 24.4 uV rms over 250 kSPS, derived here
Drives16 bit converter to 250 kSPS
Gain drift1 ppm per degree C
Output offset200 uV maximum
Slew rate10 V per microsecond, 0.64 V peak to peak at 5 MHz
Bandwidth5 MHz
Package8-lead MSOP, ARMZ, tape and reel

Selection notes

  • Single ended to differential conversion happens here without a transformer, which removes a magnetic part from the bill and removes its distortion at low frequency.
  • The VOCM pin should be driven from the converter reference, not from a divider, or the two references drift apart with temperature.
  • The 330 uA supply current at 5 V is 1.65 mW, so the driver is not a thermal concern in a multichannel front end.
  • 18 V of overvoltage beyond the supplies is the reason to keep this part when the sensor can be energised before the signal board.
  • Two of these drive a differential input converter from one single ended source; the second is not required, so the BOM carries one driver per channel pair.

Buyer questions

Does it drive a 24 bit converter as well as a 16 bit one? The published figure is a 16 bit converter to 250 kSPS. A 24 bit converter needs an effective noise floor below 1 uV, and 39 nV per root Hz does not reach it at kilohertz bandwidths, so the part is specified where it is specified.

What happens if the input goes beyond the supply? Up to 18 V beyond the supplies the part is tolerant, which is the fault condition this family is bought for. Beyond that the input protection is no longer a promise.

Category page: Analog and mixed-signal ICs. For converter side matching see ADC and DAC cross reference, and for the amplifier around it see amplifier cross reference.

Request Quote — In Stock, 100% New & Original, Full Warranty