Contact Us

AD8226ARZ

Brand: Analog Devices
Analog Devices AD8226ARZ is a analog & mixed-signal component designed for Instrumentation and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

AD8226ARZ — Analog & Mixed-Signal ICs | Superb Automation

AD8226ARZ

Analog Devices — Analog & Mixed-Signal ICs

Product Overview

The AD8226ARZ from Analog Devices is a high-performance analog / mixed-signal IC providing precision signal acquisition, conversion, and conditioning. Analog Devices (ADI) is a world leader in high-performance analog, mixed-signal, and DSP ICs for instrumentation, healthcare, automotive, and communications.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-resolution data conversion with excellent SNR and THD
  • Wide dynamic range and high linearity across operating conditions
  • Integrated voltage reference with low temperature drift
  • Flexible digital interface — SPI, I2C, or parallel options
  • Industrial/automotive temperature range with guaranteed specs
  • Low power consumption with power-down modes

Key Specifications

Resolutionbits
Channels—
Sample RatekSPS
Interface—
Supply VoltageV
Operating Temp°C
Package—
INLLSB
SNRdB
THDdB

Applications

Precision Instrumentation Industrial Process Control Medical Imaging & Diagnostics Automotive Sensor Interfaces Communications Infrastructure Test & Measurement

Request Quote — In Stock, 100% New & Original, Full Warranty

AD8226ARZ: Wide Supply Instrumentation Amplifier in an 8-Lead SOIC

The AD8226ARZ is the same amplifier as the MSOP version in a 1.27 mm pitch SOIC: gain of 1 to 1000 through 1 plus 49.4 kohm divided by RG, a supply range of 2.2 V to 36 V single or plus and minus 1.35 V to 18 V dual, 350 microamps typical supply current, 1.5 MHz bandwidth at unity gain, 22 nV per root hertz of noise, and an input that works below ground and survives 35 V on a 5 V supply. The package is the difference, and it changes three things: the thermal resistance, the ease of inspection and rework, and the parasitic capacitance of the pins, which matters at the bandwidth limit.

Published values

ParameterValue
Gain1 to 1000, G = 1 + 49.4 kohm divided by RG
Supply, single2.2 V to 36 V
Supply, dualplus and minus 1.35 V to 18 V
Supply current350 microamps typical
Bandwidth1.5 MHz at gain of 1
Noise22 nV per root hertz
Input rangeBelow ground, protected beyond the supplies
Input survival35 V at the input on a 5 V supply
Output swingWithin 1.2 V of the negative rail, 1.1 V of the positive
Temperatureminus 40 to plus 125 degrees Celsius
Package8-lead SOIC, 1.27 mm pitch

Which package survives a 36 V rail better

At 36 V and 350 microamps the die dissipates 12.6 mW. In the SOIC the junction rise is around 100 degrees per watt in still air with a modest copper area, so about 1.3 degrees, and in the MSOP it is roughly double that. Neither is a problem in isolation, but the drift specification is a die temperature specification: a local rise of a few degrees from a neighbouring regulator shifts the offset of the input pair by a fraction of a microvolt and, more importantly, creates a gradient across the pair. The SOIC's wider body spreads that gradient over more silicon, which is why precision parts in industrial equipment still use it.

Pin capacitance and the 1.5 MHz bandwidth

The bandwidth at unity gain is set by the internal compensation and by the capacitance at the gain pins. A larger package has slightly more pin capacitance, a fraction of a picofarad, which is negligible against the 2 pF to 5 pF of a gain resistor's pads and traces. What is not negligible is the trace from the gain resistor to the pins: at a gain of 100 the resistor is about 499 ohm, and a few centimetres of trace adds inductance and couples noise. Place the resistor within a few millimetres of the package in both footprints, and do not run it under the package.

Protection that is already inside, and what still is not

The 35 V survival rating covers the input structure, not the supply pins and not the reference pin. In an industrial board the supply is usually protected by a TVS and the reference by a buffer, but the reference pin is the one that gets forgotten: it is an input to the output stage, so a transient there goes straight to the output and into the converter. Bypass it, and if it is driven from a divider, buffer it. The input series resistors should be placed before the connector, not after, so that a surge sees them first.

Availability and second sourcing

Because the MSOP and the SOIC share a die, a shortage in one package is often covered by the other with a footprint change and no circuit change, which makes this pair useful as a hedge. Beyond that, the gain equation, the survival rating and the below-ground input range are the parameters to match. The amplifier cross reference page lists the wide supply family by package, the pin to pin cross reference page covers the 8-lead outlines, and the lead time page shows what is available.