AD8221ARZ-R7
Product Specifications
AD8221ARZ-R7
Analog Devices — Analog & Mixed-Signal ICs
Product Overview
The AD8221ARZ-R7 from Analog Devices is a high-performance analog / mixed-signal IC providing precision signal acquisition, conversion, and conditioning. Analog Devices (ADI) is a world leader in high-performance analog, mixed-signal, and DSP ICs for instrumentation, healthcare, automotive, and communications.
Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.
Key Features
- High-resolution data conversion with excellent SNR and THD
- Wide dynamic range and high linearity across operating conditions
- Integrated voltage reference with low temperature drift
- Flexible digital interface — SPI, I2C, or parallel options
- Industrial/automotive temperature range with guaranteed specs
- Low power consumption with power-down modes
Key Specifications
| Resolution | bits |
| Channels | — |
| Sample Rate | kSPS |
| Interface | — |
| Supply Voltage | V |
| Operating Temp | °C |
| Package | — |
| INL | LSB |
| SNR | dB |
| THD | dB |
Applications
Request Quote — In Stock, 100% New & Original, Full Warranty
AD8221ARZ in SOIC: the same amplifier with more copper under it
The AD8221ARZ is the 8-lead SOIC version of the AD8221 instrumentation amplifier, with a gain range of 1 to 1000 set by one resistor, 8 nanovolts per root hertz of input noise, 1.5 nA maximum of input bias current on the AR grade and 80 dB minimum of common mode rejection at 10 kHz. Electrically it is the same part as the MSOP order code. The reason to choose the larger body is thermal and mechanical: more copper under the die, a package that a rework station can handle, and a footprint that older boards already carry.
Published values
| Parameter | Value |
|---|---|
| Gain | 1 to 1000, one resistor, G equals 1 plus 49.4 kohm divided by RG |
| Input voltage noise | 8 nanovolts per root hertz at 1 kHz, maximum |
| Common mode rejection at 10 kHz | 80 dB minimum at G equals 1, 100 dB at G equals 1000 |
| Input bias current | 1.5 nA maximum, AR grade |
| Bandwidth | 825 kHz at a gain of 10 |
| Supply range | plus and minus 2.3 V to plus and minus 18 V, single supply allowed |
| Output | rail to rail, referenced to the REF pin |
| Package | 8-lead SOIC, twice the board area of the 8-lead MSOP |
| Temperature range | industrial, specified over the full industrial span |
| Typical use | bridge and strain gauge channels, medical front ends, precision data acquisition |
Radio frequency interference at the input pins
An instrumentation amplifier with a high gain and a wide bandwidth will rectify any interference that reaches its input pins, and the result looks like a DC offset that changes when a phone is placed near the cable. The data sheet has a section on this for a reason. The cure is a small differential capacitor across the inputs and a pair of series resistors, which together form a low pass corner well below the frequency where the input devices rectify.
The resistors also have to be matched, because any mismatch turns common mode interference into a differential signal, and the rejection of the stage only works on what is genuinely common to both inputs. A pair of 1 percent resistors gives 40 dB of conversion from common mode to differential, whatever the amplifier does after that.
Bias current return and the reference pin
The inputs draw 1.5 nA maximum, and those currents need a DC path to the amplifier common. A floating source, such as a thermocouple or an AC coupled input, has no such path, so the inputs drift to a rail and the output saturates. A high value resistor from each input to the reference node fixes it, and its value is a compromise between the offset it creates with the bias current and the loading it puts on the source.
The REF pin sets the output level and is not a low impedance node inside the part. Driving it from a divider makes the output move with the divider current, so the honest choices are a reference or an amplifier output. In a bipolar channel the reference is often set to mid supply so the output can swing either way.
Why the thermal answer changes with the body
At a gain of 1000 the part is a high impedance, low level front end and the offset drift of the whole channel is usually dominated by the amplifier rather than by the converter behind it. A larger body runs cooler for the same dissipation, and a cooler die drifts less. In a card with eight channels packed together the difference between an MSOP and a SOIC is measurable in the warm up curve.
The SOIC footprint is also the one that older boards already have, and a drop-in replacement of a part that has gone end of life usually lands on a package that the existing stencil can print. That is a procurement argument as much as an electrical one.
The pages that answer this most often are the amplifier cross reference for the family alternatives, the obsolete part cross reference hub for the acceptance test, and how to verify a drop in replacement for the case where a replacement has to be fitted before the next build.
Two questions buyers ask
Is the SOIC version a drop-in for the MSOP version? Electrically yes, mechanically no. The two bodies use different footprints and different stencil apertures, so a board cannot take both without a footprint change.
What happens if the gain resistor is left out? The gain resistor pins are open, so the gain falls to unity. The part still works, but a channel that was specified for a gain of 100 will read 100 times smaller until the resistor is fitted.